PARKSIDE PSS 65 C1 Tool Sharpening Station

Introduction

This document serves as the user manual for the PARKSIDE PSS 65 C1 Tool Sharpening Station. It provides comprehensive guidance on setup, operation, safety precautions, and maintenance to ensure optimal performance and user safety.

Intended Use

The PARKSIDE PSS 65 C1 is designed for sharpening a variety of tools including drills, knives, scissors, picks, and chisels. It is intended for use in DIY applications by adults or supervised young people aged 16 and over. It is not designed for commercial use.

Safety Instructions

User safety is paramount. Key safety guidelines include:

• Always read and understand the manual before operation.
• Wear appropriate personal protective equipment (PPE) such as safety goggles and hearing protection.
• Ensure the work area is clean, well-lit, and free from hazards.
• Verify correct electrical connections and avoid operating in wet conditions.
• Do not force the tool and maintain it properly.
• Be aware of residual risks, including potential lung or hearing damage from dust or noise, and injury from moving parts.

Assembly and Setup

The sharpening station must be securely mounted to a stable surface. The different sharpening attachments are selected and inserted into the guide rails until they click into place. Ensure all protective covers are correctly fitted before use.

Operation

Operation involves switching the device on and off using the designated buttons. It is crucial to allow the device to reach its maximum speed before commencing grinding. Detailed step-by-step instructions are provided for sharpening drills, knives, scissors, picks, and chisels. Regular test runs are recommended.

Technical Specifications

• Model: PSS 65 C1
• Brand: PARKSIDE
• Power Input: 220-240 V~, 50 Hz
• Power Consumption: 65 W (S6 20%) / 25 W (S1)
• Grinding Angle Range: 15° - 50°
• Drill Diameter Range: 3-10 mm
• Knife Width Range: 6-51 mm
• Weight: Approx. 1.37 kg
• Included Accessories: Sharpeners for drills, knives/scissors, picks/chisels, spare grinding wheel.

Maintenance and Troubleshooting

Disconnect the power before any cleaning or maintenance. Clean the unit with a soft cloth. Grinding wheels require visual inspection before each use and replacement if damaged. The manual includes a troubleshooting guide for common issues such as the device not starting or unusual noises.

Guarantee and Service

A 3-year guarantee is provided by PARKSIDE. For service or repairs, customers are directed to contact the designated Service-Center. Only original replacement parts should be used.

Declarations of Conformity

The product meets relevant UKCA and EU directives and harmonised standards, ensuring compliance with safety and environmental regulations.