Sena 10S Manual
Product Overview
The Sena 10S is a motorcycle Bluetooth headset designed for communication and entertainment on the road.
Charging
Red LED: Charging
Blue LED: Fully charged
Power On/Off
Press and hold the Jog Dial and Phone Button for 1 second to turn the device on or off.
Volume Adjustment
Increase or decrease the volume by rotating the Jog Dial clockwise or counterclockwise.
Battery Check
Power On
The battery status is indicated by LEDs:
- 70-100%: Four segments illuminated
- 30-70%: Two segments illuminated
- 0-30%: One segment illuminated
Phone, Music Pairing
Initial Pairing: The headset automatically enters pairing mode when first turned on or after a factory reset.
- Press and hold the Jog Dial and Phone Button for 1 second.
- On your mobile phone, search for Bluetooth devices and select the headset.
- Enter '0000' for the PIN if prompted.
Music Operation
Play/Pause Music: Press and hold the Jog Dial for 1 second.
Track Forward/Back: Rotate the Jog Dial clockwise or counterclockwise while pressing it.
Mobile Phone Call Making and Answering
- Answering a call: Tap the Phone Button.
- Ending a call: Tap the Phone Button.
- Voice Dial: Tap the Phone Button.
- Speed Dial: Double tap the Phone Button.
- Rejecting a call: Press and hold the Jog Dial for 2 seconds.
Intercom
Intercom Pairing:
- Press and hold the Jog Dial of two headsets for 5 seconds until the red LEDs flash rapidly.
- Tap the Jog Dial of either headset to connect.
Intercom Start/End: Tap the Jog Dial.
Setting
Configuration Menu: Press the Jog Dial for 10 seconds to access the configuration menu.
Using the Sena Device Manager: Connect the headset to your computer via USB, launch the Sena Device Manager, and navigate to DEVICE SETTING to configure headset settings. Refer to the package leaflet for download details.
Troubleshooting
Factory Reset: To restore default settings, press and hold the Phone Button for 10 seconds and then tap the Jog Dial. The headset will reset and turn off.
Certification and Safety Approvals
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in residential installations. If interference occurs, users are advised to take measures such as reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer or technician.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Users must follow operating instructions for RF exposure compliance. The antenna must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The distance between the antenna and the head surface is 40mm when equipped.
FCC Caution
Unauthorized changes or modifications may void the user's authority to operate the equipment.
Industry Canada (IC) Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following conditions: (1) this device may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation. The user must accept any radio interference, even if it compromises the device's operation.
IC RF Exposure Statement
This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Users must follow specific operating instructions for RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The distance between the antenna and the head surface is 40mm when equipped.
