LG PREMTB101 Standard III Wired Remote Controller

Product Details

Technical Specifications

Electrical

Operating Environment

Unit Data

Features

Standard Features

• 4-5/16" Color Display
• Touch Button
• Time Display
• Operation On / Off Status LED

Basic Functions

• Room Temperature and Humidity Sensing and Display
• Operation - On / Off
• Mode Selection: Auto / Cool / Dry / Heat / Fan Only
• Ventilation Mode (For Ventilator Unit)
• Air Quality Monitoring
• Occupied Cooling and Heating Temperature Setpoint
• Unoccupied Cooling and Heating Setback Temperature Setpoint
• Fan Speed: Auto / Low / Med / High
• AI Smart Care
• Controller Lock Function
• Static Pressure Installer Setting
• Error Code Display During Unit or System Malfunction
• Auto Restart on Power Failure

Advanced Functions

• Time of Day Scheduling: Five (5) Events per Day with Control of Occupied / Unoccupied, On / Off, Mode, Setpoints, and Fan Speed
• Two Setpoint Autochangeover (For Heat Recovery Systems)
• Minimum Difference between Setpoints (0 ~ 10°) Adjustable Deadband
• Home Leave Function for Temporary Unoccupied Status
• Sub-function Setting
• Comfort Level Display
• External Equipment Control via One (1) Digital Output
• Filter Sign Check and Initialization
• Time Limit Control (30 minutes ~ 540 minutes, 30 minute units)
• AP Mode Setting for LG Wi-Fi Modem Installation
• Server Room Application

Connectivity

LG Communications

• 1 Channel for V-Net.
• To communicate with LG ThinQ, use optional accessory PWFMDD200 or verify that the indoor unit has built-in Wi-Fi capability.

Communications Cable Specifications (V-Net)

Controller Interface and Dimensions

Controller Screen and Buttons

The controller features a display window showing operational status, temperature, and time (e.g., "03.15(Tue.) PM 12:56", "77°", "364"). Navigation and control are managed via several buttons:

• Operation Display Window
• Back Button
• Up/Down/Left/Right Button
• On/Off Button
• OK Button

Dimensions Diagram

The controller is square-shaped with dimensions of 4-3/4 inches in width, 4-3/4 inches in height, and 5/8 inches in depth. The diagram indicates measurements in inches.

Optional Accessories

The following accessories are sold separately:

• PZCWRC1 - 33-foot Extension Cable Assembly
• PZCWRCG3 - Group Control Cable Kit

Notes and Disclaimers

1. Available functions / features may differ based on the connected system.
2. Communication cable can be extended to a maximum of 164 feet, between controller and indoor unit, by using field-supplied wire or the Wired Remote Group Control Cable Assembly (PZCWRCG3) or Wired Remote Extension Cable (PZWRC1), maximum of four (4).
3. Installation must follow instructions in the applicable LG installation manual.
4. Centralized controller (AC Smart / ACP Series) and Premium PDI are required for energy target display function.

For continual product development, LG reserves the right to change specifications without notice.

LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp. Visit www.lghvac.com.

Document Reference: SB_Std_III_WiredRemoteController_PREMTB101_2024_01_09_063936