Baby Brezza Formula Pro Advanced

Getting Started

Welcome to your Baby Brezza Formula Pro Advanced. This guide provides essential tips for optimal use and care.

Key Tips:

• Ensure the drip tray is firmly attached to the base to prevent spills.
• The stirring wheel attaches securely to the axle; a firm pull is needed for removal.
• Regular cleaning is crucial for maintaining the appliance's performance.

Customer Support and Warranty Information

For assistance with your Baby Brezza product, contact Customer Service at 1-888-396-6552 or visit babybrezza.com/contact. Before returning a product, please reach out to us for personalized support.

Limited 1-Year Warranty

This warranty is valid for products purchased through authorized resellers and used in the United States and Canada. It covers defects in material or workmanship under normal home use for one year from the original purchase date. Proof of purchase is required. For warranty service, contact Customer Service at 1-888-396-6552, visit babybrezza.com/contact, or write to Baby Brezza, 250 Passaic Street, Newark, NJ 07104, Attn: Customer Service.

Product patents and design registrations are listed at babybrezza.com/pages/patents.

© 2025 Baby Brezza Enterprises LLC

Product Activation and General Instructions

Activate your warranty by visiting babybrezza.com/register for benefits like faster customer support and extended service hours.

Please read and follow all instructions carefully to ensure proper operation and optimal results from your Formula Pro Advanced.

Important Safeguards

When using electrical appliances, basic safety precautions should be followed:

1. Read all instructions before using.
2. Do not touch hot surfaces.
3. To protect against electric shock, do not immerse the cord, plug, or appliance in water or other liquid.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless closely supervised and instructed by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure they do not play with the appliance.
5. Turn off and unplug the appliance when not in use, before assembling/disassembling parts, and before cleaning. Grasp the plug to unplug, never the cord.
6. Do not operate any appliance with a damaged cord or plug, or after it malfunctions, is dropped, or damaged. Contact the manufacturer for examination, repair, or adjustment.
7. The use of accessory attachments not recommended by the manufacturer may cause fire, electric shock, or injury.
8. Use on a level surface, ensuring no debris is under the unit and the rubber wheels are touching the surface.
9. Household use only. Do not use outdoors.
10. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
11. Do not place on or near hot gas or electric burners, or in a heated oven.
12. Do not use the appliance for other than its intended use.
13. Do not attempt to use the machine without water in the water tank.
14. This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully, reverse it. If it still does not fit, contact a qualified electrician. Do not modify the plug.
15. A short power-supply cord is provided to reduce risks of entanglement or tripping. Longer cords or extension cords may be used if care is exercised. Ensure the extension cord has the proper electrical rating and is arranged so it does not drape over surfaces where it can be pulled on or tripped over.
16. Before serving, ensure the formula mixture is at a safe temperature for the baby.
17. Avoid contact with moving parts. Never remove the powder container, powder container lid, funnel, or water tank while the machine is in operation.
18. Do not disassemble or open the base of the machine.

SAVE THESE INSTRUCTIONS

Technical Data

Initial Setup and First Rinse

Follow these steps before initial use:

Preparation:

• Place the Formula Pro Advanced on a level surface with the back facing you.
• Remove the water tank, wash it with warm soapy water, rinse thoroughly, and dry.
• Fill the water tank with bottled water suitable for infant formula preparation or boiled water cooled to room temperature.
• Place the water tank back on the base, turn the machine around to face the front, and plug it in. The machine will turn on, and the LCD screen will light up. A single beep indicates power on. If the screen remains off, press the power button.

Rinsing the Machine:

• Place a cup or bottle larger than 10oz under the funnel.
• Press the "ounce" button repeatedly until the LCD screen displays "10oz".
• Press the "water only" button. The machine will dispense 10oz of water.
• Dispose of the dispensed water.

Turn off and unplug the machine. Familiarize yourself with the parts on the next page before proceeding with assembly.

Important Warnings for Setup:

• Proper setup and cleaning are critical for the Formula Pro Advanced's function. Follow all instructions carefully.
• Always use distilled or boiled water cooled to room temperature. Never pour boiling/hot water into the water tank.
• Using unboiled tap water or unsterilized bottles can be detrimental to infant health. Use purified water suitable for infant formula preparation.
• Prepare only one bottle at a time, feed immediately, and follow all instructions. Do not keep leftover formula.
• Consult your pediatrician before use if your child was born prematurely, with low birth-weight, or is immune deficient.

Parts Identification

Disassemble and wash all parts (except the base) and dry thoroughly before assembly.

Disassembly Tip:

To remove the Stirring Wheel, grasp it firmly and pull upwards while holding the powder container down.

Component List:

• Powder Container Lid
• Powder Container
• Powder Dispensing Hole
• Measuring Wheel with Silicone Scraper
• Axle
• Locking Cover
• Stirring Wheel
• Funnel Compartment
• Funnel Cover
• Funnel
• Control Panel
• Base
• Bottle Grate
• Drip Tray
• Water Tank
• Power Cord (located on the back)

Note: Never clean the Powder Container in a dishwasher, sterilizer, or microwave.

Assembly Instructions

Assembly videos are available at babybrezza.com/fpainformationcenter.

Step 1: Dry Parts

After hand washing, ensure all parts are completely dry before assembly.

Step 2: Assemble Funnel and Cover

Assemble the funnel and funnel cover. Insert the funnel assembly into the funnel compartment by sliding it upwards, then inwards.

Step 3: Place Axle

Place the axle onto the base as shown.

Step 4: Position Powder Container

Place the powder container onto the base with the printed markings facing you.

Step 5: Install Measuring Wheel

Place the measuring wheel into the powder container, fitting it over the axle with the flat side facing down. Ensure the holes in the measuring wheel align with the diagram.

Step 6: Install Locking Cover

• Place the front edge of the locking cover into the recess inside the front of the powder container, UNDER THE TAB.
• Fit the hole in the locking cover over the top of the axle. It may not lay completely flat.

Step 7: Verify Assembly

Confirm the locking cover and measuring wheel are assembled as shown.

Step 8: Attach Stirring Wheel

Place the stirring wheel onto the axle and push down firmly until you hear a click. Ensure the stirring wheel is securely snapped in place and does not lift easily.

Preparing Your First Bottle

You are now ready to add formula powder and prepare your first bottle.

Step 1: Add Formula Powder

Carefully pour formula powder into the powder container. Wipe up any spilled powder.

Step 2: Check Powder Level

Ensure the powder level is between the MIN and MAX lines on the container.

Step 3: Secure Powder Container Lid

Place the powder container lid on the container and turn clockwise until it stops. This engages the safety switch and locks the container to the base. To remove, turn the lid counter-clockwise.

Step 4: Adjust Drip Tray

Fit the drip tray onto the base to accommodate your bottle height. Adjust it so the bottle's mouth is as close to the funnel as possible. Push the drip tray firmly against the base to secure it.

Note: The powder container and its parts do not need to be removed for daily cleaning.

Controls and Operation

Familiarize yourself with the control panel:

• 1 LCD Display: Shows selected functions and warnings.
• 2 Powder Setting Button: Press to select the setting number for your formula brand and type.
• 3 Water Only Button: Press to dispense the ounces displayed on the LCD (selected by the "ounce" button"). Press and hold for 5 seconds to empty the machine of water.
• 4 Temp Button: Press to select your desired warming temperature.
• 5 Ounce Button: Press to select the ounces of water to dispense (2-10 oz). A 1oz bottle option is not available.
• 6 Start Button: Press to begin dispensing formula.
• 7 Power Button: Press to turn the machine on or off, or to stop dispensing.

Temperature Indicator Symbols:

• ⚪ Room temperature
• ? Body temperature
• ? Slightly warmer than body temperature

The temperature indicator flashes during heating and remains solid when the set temperature is reached.

Powder & Water Settings:

Powder Setting Indicator: Use the "powder setting" button to choose between settings 1-10. Refer to babybrezza.com/FPA for the correct setting for your formula.

Ounce Indicator: Use the "ounce" button to select water volume (2, 3, 4, 5, 6, 7, 8, 9, 10 ounces). This volume does not include the powder.

Warning Symbols:

The unit will not operate if any of these symbols are illuminated:

• [Powder Lid Open Symbol]: The powder container lid is not closed completely or is not positioned correctly. Ensure it is closed fully.
• [Clean Funnel Symbol]: Illuminates after every 4 bottles made. Remove, wash, dry, and re-install the funnel assembly. See Page 11 for details.
• [Low Water Symbol]: Refill the water tank when this symbol is illuminated.
• [Funnel Out Symbol]: The funnel is removed or not inserted completely. Ensure the funnel is pushed all the way in.

Preparing Your First Bottle (Continued)

Ensure your Formula Pro Advanced is plugged in and turned on.

Step 1: Select Powder Setting

Press the "powder setting" button to select the correct setting (1-10) for your formula brand and type. Find the correct setting at babybrezza.com/FPA.

Step 2: Select Ounce Size

Press the "ounce" button to select the desired water volume. This volume is for water only and does not account for powder volume.

Step 3: Select Temperature

Press the "temp" button to choose the temperature: ⚪ Room temperature, ? Body temperature, or ? Slightly warmer than body temp. The indicator will flash during heating and stay solid when the temperature is reached.

Step 4: Start Dispensing

Press the "start" button. The machine will dispense powder and water together and stop automatically. Some clumping may occur with certain formulas.

Step 5: Check Formula Level

The final volume will appear higher than the selected ounce size due to added powder. For example, 4 oz of water plus powder may result in 4.5-4.75 oz total volume.

Step 6: Final Check and Feed

Check for clumps and shake or stir the bottle if necessary. Verify the temperature before feeding your baby.

Step 7: Refill Powder

Refill the powder container when the stirring wheel arms become visible. This ensures accurate powder measurement.

Easy Daily Cleaning Instructions

It is crucial to clean the funnel after every 4 bottles to ensure accurate dispensing.

Step 1: Remove Funnel Assembly

Remove the funnel and funnel cover by pulling them out and down.

Step 2: Wash Funnel Assembly

Wash the funnel and funnel cover with warm, soapy water, rinse well, and dry completely before re-installing.

Step 3: Clean Powder Dispensing Hole

Wipe the powder-dispensing hole on the underside of the powder container using a dry paper towel or soft cloth.

Cleaning Tip:

Consider purchasing an extra funnel and funnel cover from BabyBrezza.com to swap out during cleaning, making the process even easier. Remember to still wipe the powder dispensing hole.

Note: The powder container and its parts do not need to be removed for daily cleaning.

Monthly Cleaning Instructions

Perform a thorough cleaning of your Formula Pro Advanced once a month. Cleaning videos are available at babybrezza.com/fpainformationcenter.

Step 1: Wash Parts

Hand-wash all listed parts with warm, soapy water, rinse well, and dry thoroughly.

Step 2: Wash Water Tank

Hand-wash the water tank with warm, soapy water, rinse well, and dry thoroughly.

Monthly Descaling Instructions

To prevent mineral scale buildup inside the machine:

1. Empty the water tank. Fill it with 20oz distilled vinegar and 20oz purified water, or use Baby Brezza Descaler from babybrezza.com.
2. Place the water tank on the base and a cup larger than 10oz under the funnel.
3. Select "10oz" and press the "water only" button to dispense.
4. Empty the cup, place it back under the funnel, and press "water only" again to dispense another 10oz.
5. Unplug the machine, remove the water tank, and empty it. Let the machine sit for 4 hours.
6. Wash, rinse, and fill the water tank to the MAX line with purified water. Place it back on the base.
7. Plug in the machine, place a cup under the funnel, and use the "water only" button to run a 10oz cycle. Dispose of the water. Repeat this step to run the entire tank of purified water through the machine. The "Low Water" indicator will turn on when rinsing is complete.
8. Refill the water tank with purified water and return to normal use.

Long Term Storage Instructions

It is essential to clean the machine and remove all formula powder residue before storage.

Preparation for Storage:

1. Remove the powder container parts, funnel, funnel cover, drip tray, and water tank from the base.
2. Wipe the base with a clean damp cloth, ensuring all formula residue is removed. Dry the base thoroughly.
3. Empty the powder container, wash all its parts, dry them thoroughly, reassemble, and reinstall them on the base.
4. Follow the Monthly Descaling Instructions (Page 12), steps 1-7 only. Do not remove or refill the water tank after step 7.
5. Place a cup under the funnel and press and hold the "water only" button for 5 seconds. Water will dispense continuously until the machine is completely empty.
6. Unplug the machine. Remove the funnel, funnel cover, and water tank. Dry them thoroughly and reinstall them on the machine.
7. Your machine is now ready for storage. Pack it in its box or a bag to keep it dust-free.

Error Codes

If an electrical component error or interruption occurs, the LCD screen will display an error code. Pressing and holding the power button usually clears the code. If the code persists or cannot be cleared, contact Baby Brezza Customer Service.

• Motor Operation Error (Powder Parts): Indicates an error with the motor that turns the powder container parts.
• Motor Sensor Error (Measuring Wheel): Indicates an error with the motor sensor that detects measuring wheel rotation.
• Water Flow Meter Error: Indicates an error with the water flow meter measuring water volume.
• Temperature Sensor Error: Indicates an error with the temperature sensor measuring water temperature.
• Water Level Switch Error: Indicates an error with the water level switch measuring remaining water.
• Hot Water Detected: Hot water entered the machine. Empty and refill the tank with room temperature water. Press and hold the power button to clear the code, then press and hold "water only" to clear hot water from the machine.
• Powder Container Lid Open During Operation: Ensure the lid is closed. Press and hold the power button to clear.
• Funnel Removed During Operation: Ensure the funnel and cover are installed correctly. Press and hold the power button to clear.

Troubleshooting

If problems persist, do not return the product to the store. Contact Baby Brezza Customer Service at 1-888-396-6552 or visit babybrezza.com/fpainformationcenter for videos.