PRODUCT INSTRUCTIONS

Product Instruction

This product utilizes a heating body with high thermal efficiency and strong stability. It is equipped with a rapid thermal air supply system, built-in induction thermostat, and a dump switch. The air heater features a beautiful appearance, stable performance, fast heating, even heat dissipation, and a long service life. It offers good insulation and high-temperature resistance, ensuring high human safety performance. It is suitable for home, office, and other places.

Structure Introduction

The air heater consists of the following components:

• Work indicator: Indicates when the heater is operating.
• Temperature switch: Allows adjustment of the temperature settings.
• Interrupt power after dumping: A safety feature that cuts power if the unit is tipped over.
• Insulated enclosure: Provides insulation for safety and efficiency.
• PTC HEATING: The heating element responsible for warming the air.
• Metal Mesh: Protects the heating element and directs airflow.

Instructions

1. Open the package and carefully remove the air heater. Place the blower on a smooth, stable surface. Avoid using it on soft or unstable surfaces like carpets or beds.
2. Ensure that the power supply and socket meet the parameter requirements indicated on the machine's nameplate.
3. Before use, confirm that the heater switch is in the "0" (off) position.
4. Operate the temperature gear switch: "0" is the power off setting, "I" is for warm air, and "II" is for hot air.

Safe Caution

• Do not place the blower directly under a power outlet. Use a reliable power outlet with a capacity of at least 10A for the outlet, plug, and power lead.
• Avoid pointing the air supply direction towards the socket, plug, or power cord to prevent accidents.
• This product is strictly prohibited for use in environments containing flammable and explosive articles, or in areas with severe dust and oil pollution. Ensure the surrounding air is well-ventilated during use. The ambient temperature should not exceed 30 degrees Celsius. Unplug the power when the room is unoccupied.
• Do not use this heater near bathtubs, shower heads, or swimming pools.
• Do not place any objects on the machine, cover the heater, or attempt to barbecue on it to avoid fire hazards.
• If the product malfunctions, please contact the dealer or manufacturer for repair. Do not attempt to dismantle the machine for repair without proper authorization.
• Do not insert foreign objects into the inlet and outlet to avoid danger. Exercise special caution for children.
• It is strictly forbidden to touch the protection net cover while the heater is operating to prevent burns. Exercise special caution for children.
• The heater should not be used with a program, timer, or any other device that operates with an automatic power supply.
• Warning: To prevent overheating, do not cover the heater or block the air inlet and outlet with any foreign materials!

Cleaning and Maintenance

• Before performing any maintenance, unplug the power cord and ensure the heater has cooled down completely.
• Wipe off dust from the surface with a soft cloth. If the surface is very dirty, use a soft cloth dampened with water below 50 degrees Celsius to wipe and then dry.
• Do not use gasoline, thinner, or any detergent that could damage the surface. Do not immerse the entire machine in water.
• After cleaning, allow the unit to dry completely before use.
• During storage, the heater should be cooled, dried, and packed in a dry, ventilated place.

Product Technology

• Name: Air Heater
• Item No.: XH-1201
• Rate Frequency: 50Hz
• Product Serial: Personal Exclusive
• Rate Power: 1200W

Warranty Card

For your benefit, please keep the product warranty card properly for warranty purposes.

Thank you for purchasing this product. To better provide high-quality after-sales service, please cooperate as follows:

1. When purchasing, please ask the seller to issue the sales proof as the warranty basis.
2. Please fill in the card in detail and have it stamped with the distributor's seal for the warranty to be effective.
3. Please read the terms of the maintenance regulations in detail.
4. If you require any service, please contact the local dealer directly or call the customer service hotline.

Maintenance Regulation

1. During the warranty period, the entire machine is guaranteed for six months under normal use (from the date of purchase, subject to the invoice date).
2. During the warranty period, under the following circumstances, material costs or service fees may be charged. Please understand:
   • Damage caused by improper use or maintenance.
   • Damage caused by disassembly.
   • Absence of vouchers or valid invoice.
   • The model does not match the model of the repaired product.
   • The appearance is naturally stained due to use.
   • Damaged for commercial use.
   • Damage caused by force majeure is not covered by the warranty.
3. This card cannot be reissued. Please keep it properly.
4. For products beyond the scope of maintenance and warranty period, only the cost of parts, materials, and round-trip freight will be charged.