QW33 Smart Sports Watch: User Manual and Features

This document provides a comprehensive guide to the QW33 Smart Sports Watch, covering setup, charging, app pairing, detailed feature explanations, hardware specifications, and troubleshooting.

Product Overview

The QW33 Smart Sports Watch is designed to be your companion for fitness, health tracking, and daily notifications. It features a vibrant touch screen, multiple sport modes, and seamless integration with your smartphone.

Key Components:

Cover Glass: Protects the display.
1.28" Full Circle Full Touch Screen: High-resolution display for interaction.
Encoder Key / Menu Key: Used for navigation and menu access.
Sensor: For health monitoring.
Power On/Off Button / Recent Task Button: For device power and task management.
Charging Contacts: For magnetic charging.
Silicone Strap: Comfortable and adjustable for wear.

Packing List

Smart watch: 1
Magnetic charging cable: 1
Instruction manual: 1

Getting Started

Charging Your Smartwatch

Ensure the battery is in a normal state for first use. If the power does not turn on properly, connect the device to a charger. The watch is powered by USB +5V via magnetic charging. A full charge takes approximately 2.5 hours. After a full charge, press and hold the power button for about 3 seconds to turn on the smartwatch.

App Installation

To connect your smartwatch to your phone and access more features, you need to download the "Transfer Coil App" (also referred to as "Transfer Mold app").

Download Method: Scan the provided QR code [QR code for app download] to download the app. It supports both Apple and Android devices.
Alternative Download: The app can also be downloaded from the "Play Store" for Android phones and the "App Store" for Apple devices.

Note for Android Users: Android phones need to allow apps to run in the background. Ensure all notification permissions, including contact information access, are granted to the app in your phone's settings.

Bluetooth Pairing

To pair your watch with your smartphone:

Turn on the Bluetooth switch on your phone.
Open the Transfer Coil App and set up your personal information.
Navigate to "Devices" and tap "Add Device".
Select "QW33" from the search list.
Once pairing is complete, you can customize and use the watch's features.

Audio Pairing (QW33Audio): After connecting the smartwatch "QW33" on an Android phone, a prompt may appear to connect with "QW33Audio" for calls and music. For Apple phones, dual Bluetooth connection might be combined into a single "QW33Audio" entry in your phone's Bluetooth settings. Ensure "QW33Audio" is enabled to transmit all phone audio to the watch for call and music functions.

Wearing the Watch Correctly

Adjust the strap size to fit your wrist comfortably.
Ensure the sensor is in contact with your skin for accurate health monitoring.

Using Your Smartwatch

Basic Operations

Power On/Off: Press and hold the power button.
Change Watch Face: Long press the home screen, swipe left/right to switch, or rotate the encoder key to select.
Access Main Menu: Press the encoder button.
Swipe Down: View messages.
Swipe Up: Access the shortcut menu.
Swipe Left to Right: Enter dual-window mode.
Swipe Right to Left: Quick access to relevant features.
Power Saving: Click the battery symbol [battery symbol] in the drop-down menu and select "OK" to reduce screen brightness and conserve power.

Key Features

Healthy Triple Ring: Displays activity (outer ring), exercise (central ring), and standing (inner ring) progress towards daily goals.
Physical Training: Access over 120 sport modes by tapping the sport icon. Exercise data syncs to the mobile app.
Sleep Monitoring: Wear the watch while sleeping to monitor sleep time and quality (deep/light sleep). Data syncs to the mobile app.
Music Control: Control music playback (pause, play, skip tracks) on your paired phone.
Female Menstrual Cycle: Set your gender to female in the mobile app's personal information section to enable menstrual cycle tracking and management.
Alarm Clock Reminders: Set up to 5 alarms. The smartwatch will vibrate when an alarm time is reached.
Meteorology: Displays local meteorological data including ultraviolet light, air pressure, wind speed, and humidity, pushed from the paired phone.
Voice Assistant: Activate the voice assistant by tapping its menu icon. Requires Bluetooth audio to be enabled and connected to the phone.
Weather Display: Shows local weather information automatically pushed from the Transfer Coil App.
Language Selection: Choose from 18 available menu languages.

Transfer Coil App Functions and Settings

The Transfer Coil App is central to managing your smartwatch:

Device Page: Bind/unbind the watch, set message notifications, perform firmware upgrades, and download new watch faces.
Homepage: Displays detailed synchronized data such as exercise records, step counts, sleep patterns, and menstrual cycles.
My Page: Set personal information, target steps, and access frequently asked questions. For female users, setting gender to 'female' here enables menstrual cycle tracking on the homepage and syncs to the watch.

Additional App Settings:

Raise to Turn On Screen: Enable this feature to light up the screen when you raise your wrist while the screen is off.
Dial Market: Download new watch faces or customize existing ones.
Alarm Clock Reminders: Set up to 5 alarms.
My QR Code: Configure payment codes (WeChat, Alipay) for quick access via the watch. Follow on-screen prompts in the app.
Firmware Upgrades: Update the watch's firmware when new versions are available.

Important Note: This app and the smartwatch are not medical devices. Data collected is for informational purposes only and should not be used for clinical diagnosis, medical research, or treatment.

Hardware Specifications

Main Control Chip: JL7012
Sensor: HRS3301
Gravity Sensor: 3-axis gravity sensor
Memory: 640KB SRAM + 64Mb FLASH
Motor: Linear flat wire bonding motor
Buttons: Encoder button + Power button
Charging: Magnetic charging, 5V DC USB
Display: 1.28" HD TFT display
Screen Resolution: 240*240 pixels
Touch Screen: Full touch capacitive screen
Bluetooth Version: BLE5.1
Battery Information: 260mAh, 3.7V polymer lithium battery
Support Mobile System: iOS 10.0 or above, Android 5.0 or above

Frequently Asked Questions

1. Does not turn on:

Connect the charger to activate the watch for first use. If the bracelet is out of power, please charge it.

2. Unable to make a Bluetooth connection:

a. Ensure Bluetooth is enabled on your mobile phone and the watch is powered on.
b. Verify the watch is not already bound to another account.
c. Keep the watch and mobile phone in close proximity during the search.

3. Bluetooth disconnects automatically, preventing message push:

Ensure notifications are turned on (including auxiliary functions). Check if "Do Not Disturb" mode is active on the watch, as it prevents message pushes.

4. Exercise and sleep data not syncing to the mobile app:

Try disconnecting and reconnecting the Bluetooth connection between the watch and your phone.

Note on Background Apps: Some mobile systems may automatically close background apps to save power, leading to Bluetooth disconnection. To prevent this, configure your phone's settings (e.g., Phone Manager, Security Center) to add the Transfer Coil App to a whitelist or allow it to self-start in battery management settings.

For more FAQs, please refer to the "Hot Questions" section within the "My" page of the "Transfer Coil App".

Tips

This watch is not a medical device. Measured health data is for reference only.
Manual content is subject to change without prior notice.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.