Overview
The ADRV-DPD1/PCBZ is a comprehensive evaluation kit designed for developing and testing advanced wireless communication systems. It features a 2x2 MIMO radio board powered by the Analog Devices AD9375 highly integrated RF transceiver, which includes built-in digital predistortion (DPD) capabilities. This design is optimized for LTE applications, offering a 24 dBm output power per path and supporting Band 7 FDD.
Key Features
- 2x2 MIMO radio board with AD9375 transceiver and SKY66297-11 PA
- Integrated Digital Predistortion (DPD) for enhanced signal quality
- Supports LTE 20 MHz bandwidth, Band 7 FDD
- Includes transceiver, 2 PAs, 2 LNAs, duplex filters, and DC power solution
- Low power consumption: approximately 10 W
- Designed for integration with Xilinx Zynq-7000 FPGA platforms
Evaluation Kit Contents
- ADRV-DPD1/PCBZ radio board
- ADRV-INTERPOS1/PCBZ interposer board with clock solution
- 8 GB SD card
- RF adapters
- 12 V, 60 W AC/DC power supply
Software and Requirements
The system is controlled via the AD9375 Small Cell Evaluation Software (SCES). Essential equipment includes an evaluation board for the Xilinx Zynq-7000 SoC FPGA (e.g., EVAL-TPG-ZYNQ3), a Windows-based PC, and an Ethernet connection.
Further Information
For detailed specifications and operational guidance, consult the full user guide and the AD9375 data sheet available from Analog Devices.
