Delta UPS Amplon Family
RT Gen3 Series, Single Phase, 1/2/3 kVA
Safeguard your edge with a smart and economical power solution
Delta's Amplon RT series UPS is a robust online double-conversion UPS offering strong power protection with a convertible rack and tower configuration in 2U size. With its clean output power in pure sine wave, RT Gen3 can handle a wide range of utility problems, from blackout to harmonic distortion. Rest assured that your device is always fortified and safeguarded with RT Gen3!
Key Features
High Availability
- True online double-conversion topology and zero transfer time to battery mode
- Operates at up to 50 °C adapting to various environments
- Excellent overload capacity allows the overload condition to continue within the timeframe
- External battery connector for easy scaling of longer backup time
Green with Low TCO
- Output power factor 0.9 provides more capacity to load
- Up to 90% online mode efficiency and 95% ECO mode efficiency contributes to significant energy cost savings
- Capable of working in harsh electrical environments with a wide input voltage range to minimize battery usage
Easy Management
- Convertible rack and tower configuration with rotatable LCD screen
- LCD display and intuitive interface offer effortless monitoring and configuration
- Remote Emergency Power Off (REPO) provides added safety by allowing UPS and connected devices to be remotely shut down during emergencies
- Intelligent management software connectivity via RS232, mini slot or USB port for remote monitoring and setting
Applications
- ? IT
- ? Telecom
- ? Industrial
- ? Transportation
- ? Financial
- ?️ Government
- ? SME
- ?️ Retail
Hardware and Form Factor
Rear Panel Ports
The rear panel features several connection points. For the 1kVA, 2kVA, and 3kVA models, these include:
- 1: AC input
- 2: Input circuit breaker
- 3: USB port
- 4: RS-232 port
- 5: Mini slot
- 6: External battery pack connector
- 7: Output socket(s) (IEC C13 x4 for 1kVA/2kVA, IEC C13 x4 + C19 x1 for 2kVA, IEC C20 x1 for 3kVA)
- 8: REPO (Remote Emergency Power Off)
LCD Display
The LCD screen provides real-time information on Input & battery voltage, Output & battery voltage, Battery status, Operation mode, and Load percent (%).
Form Factor
The UPS offers a versatile rack/tower form factor with a rotatable LCD screen for flexible installation and easy viewing.
Runtime Table (Unit: min)
The following table estimates runtime based on operation at 25 °C with batteries fully charged. Up to 4 EBCs (External Battery Cabinets) can be paralleled.
| kVA | 90 W | 180 W | 270 W | 360 W | 450 W | 540 W | 630 W | 720 W | 810 W | 900 W |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 kVA | 57.5 | 26.9 | 16.8 | 11.9 | 9.1 | 7.3 | 6.1 | 3.5 | 3.5 | 3.1 |
| UPS+1EBC | 182.2 | 94.3 | 61.8 | 45.0 | 34.7 | 27.9 | 23.1 | 3.5 | 3.5 | 3.5 |
| UPS+2EBC | 310.6 | 163.7 | 109.2 | 80.8 | 63.5 | 51.8 | 43.4 | 3.5 | 3.5 | 3.5 |
| UPS+3EBC | 439.1 | 233.3 | 156.8 | 117.0 | 92.5 | 76.1 | 64.2 | 3.5 | 3.5 | 3.5 |
| UPS+4EBC | 567.7 | 302.9 | 204.5 | 153.2 | 121.7 | 100.5 | 85.2 | 3.5 | 3.5 | 3.5 |
| 2 kVA | 61.1 | 28.3 | 17.7 | 12.5 | 9.5 | 7.7 | 6.5 | 3.5 | 3.5 | 3.3 |
| UPS+1EBC | 190.6 | 98.9 | 64.9 | 47.3 | 36.6 | 29.4 | 24.3 | 3.5 | 3.5 | 3.5 |
| UPS+2EBC | 324.8 | 171.6 | 114.6 | 84.9 | 66.7 | 54.5 | 45.7 | 3.5 | 3.5 | 3.5 |
| UPS+3EBC | 459.1 | 244.4 | 164.5 | 122.8 | 97.2 | 79.9 | 67.5 | 3.5 | 3.5 | 3.5 |
| UPS+4EBC | 593.3 | 317.3 | 214.4 | 160.8 | 127.8 | 105.5 | 89.5 | 3.5 | 3.5 | 3.5 |
| 3 kVA | 67.1 | 29.4 | 18.1 | 12.5 | 10.3 | 8.2 | 6.9 | 3.5 | 3.5 | 3.5 |
| UPS+1EBC | 203.5 | 106.0 | 69.7 | 50.9 | 39.4 | 31.8 | 26.3 | 3.5 | 3.5 | 3.5 |
| UPS+2EBC | 346.5 | 183.7 | 122.9 | 91.2 | 71.7 | 58.6 | 49.2 | 3.5 | 3.5 | 3.5 |
| UPS+3EBC | 489.6 | 261.5 | 176.3 | 131.7 | 104.4 | 85.9 | 72.6 | 3.5 | 3.5 | 3.5 |
| UPS+4EBC | 632.8 | 339.4 | 229.7 | 172.4 | 137.2 | 113.4 | 96.2 | 3.5 | 3.5 | 3.5 |
Technical Specifications
| Parameter | RT-1K | RT-2K | RT-3K |
|---|---|---|---|
| Topology | Online double-conversion | Online double-conversion | Online double-conversion |
| Power Rating | 1 kVA 0.9 kW | 2 kVA 1.8 kW | 3 kVA 2.7 kW |
| INPUT | |||
| Nominal Voltage | 220/230/240 Vac, 1 phase 2 Wire (1PH+PE) | 220/230/240 Vac, 1 phase 2 Wire (1PH+PE) | 220/230/240 Vac, 1 phase 2 Wire (1PH+PE) |
| Voltage Range | 180~280 Vac (full load); 120~300 Vac (50% load) | 180~280 Vac (full load); 120~300 Vac (50% load) | 180~280 Vac (full load); 120~300 Vac (50% load) |
| Frequency | 40~70 Hz | 40~70 Hz | 40~70 Hz |
| Power Factor | ≥ 0.99 (full load) | ≥ 0.99 (full load) | ≥ 0.99 (full load) |
| Connection | IEC C14 x1 | IEC C13 x4 | IEC C13 x4, C19 x1 |
| OUTPUT | |||
| Nominal Voltage | 208(1), 220, 230, 240 Vac | 208(1), 220, 230, 240 Vac | 208(1), 220, 230, 240 Vac |
| Voltage Regulation | ±1% | ±1% | ±1% |
| Frequency | 50/60 Hz ± 0.5% | 50/60 Hz ± 0.5% | 50/60 Hz ± 0.5% |
| Total Harmonic Distortion (THDv) | < 3% (linear load) | < 3% (linear load) | < 3% (linear load) |
| Power Factor | 0.9 | 0.9 | 0.9 |
| Connection | IEC C13 x4 | IEC C13 x4, C19 x1 | IEC C20 x1 |
| Overload Capability | < 105~110%: 10 minutes; 110~130%: 30 seconds; 130~150%: 3 seconds | < 105~110%: 10 minutes; 110~130%: 30 seconds; 130~150%: 3 seconds | < 105~110%: 10 minutes; 110~130%: 30 seconds; 130~150%: 3 seconds |
| Current Crest Ratio | 3:1 | 3:1 | 3:1 |
| EFFICIENCY | |||
| Online Mode | 88% | 94% | 90% |
| ECO Mode | 93% | 95% | 95% |
| BATTERY | |||
| Battery Type | VRLA, inbuilt battery | VRLA, inbuilt battery | VRLA, inbuilt battery |
| Nominal Voltage | 24 Vdc | 48 Vdc | 72 Vdc |
| Quantity | 2 pcs | 4 pcs | 6 pcs |
| Runtime (100% load) | 3.1 mins | 3.3 mins | 3.5 mins |
| Runtime (70% load) | 6.1 mins | 6.5 mins | 6.9 mins |
| Charging Time | 4 hours to 90% | 4 hours to 90% | 4 hours to 90% |
| Parallel Configuration | Up to 4 EBCs | Up to 4 EBCs | Up to 4 EBCs |
| Charge Current | 1 A | 1 A | 1 A |
| COMMUNICATION INTERFACE | |||
| Display | LCD screen with LED indicators | LCD screen with LED indicators | LCD screen with LED indicators |
| Port | USB, RS232, mini slot (option for Modbus TCP/IP, SNMP), REPO | USB, RS232, mini slot (option for Modbus TCP/IP, SNMP), REPO | USB, RS232, mini slot (option for Modbus TCP/IP, SNMP), REPO |
| PHYSICAL | |||
| Dimensions (W x D x H) | 438 x 310 x 86 mm | 438 x 410 x 86 mm | 438 x 630 x 86 mm |
| Net Weight | 10.6 kg | 17.9 kg | 26.6 kg |
| Packing Dimensions (W x D x H) | 600 x 500 x 240 mm | 565 x 700 x 240 mm | 600 x 760 x 240 mm |
| Packing Weight | 13.9 kg | 22 kg | 31.5 kg |
| ENVIRONMENT | |||
| Operating Temperature | 0 to 50 °C (40 to 50 °C de-rating to 70% load) | 0 to 50 °C (40 to 50 °C de-rating to 70% load) | 0 to 50 °C (40 to 50 °C de-rating to 70% load) |
| Humidity | 10~90% (non-condensing) | 10~90% (non-condensing) | 10~90% (non-condensing) |
| Audible Noise | ≤ 50 dBA | ≤ 50 dBA | ≤ 50 dBA |
| Altitude | 0-3,000 m (derating 1%/100 m from 2,000-3,000 m) | 0-3,000 m (derating 1%/100 m from 2,000-3,000 m) | 0-3,000 m (derating 1%/100 m from 2,000-3,000 m) |
| Storage Temperature | -20 to +50 °C | -20 to +50 °C | -20 to +50 °C |
| Ingress Protection | IP20 | IP20 | IP20 |
| CONFORMANCE | |||
| Safety | CE, KC | CE, KC | CE, KC |
| EMC | IEC 62040-2 | IEC 62040-2 | IEC 62040-2 |
| Sustainability | ROHS, REACH | ROHS, REACH | ROHS, REACH |
(1) De-rating to 70% load
Management Solution
UPSentry
- Supports RS-232 & USB communication
- Schedules shutdown, restart and battery test
- Event tracking
ShutdownAgent
Provides a graceful unattended shutdown of multiple computer systems over a network.
SNMP IPv6 (optional)
- Remote UPS management from any workstation through internet or intranet
- UPS and system function configuration from any client (password protected)
- Event logs and data tracking
Accessories
Standard Accessories (What's in the Box)
- RT Gen3 UPS
- USB cable (1.5 m)
- Ear kit and tower stand
- UPSentry software
- User manual
- AC input cable with Schuko plug (1.5 m)
- ShutdownAgent software
Optional Accessories
External Battery Cabinet
| Model | Net Dimensions (W x D x H) | Net Weight | Packing Dimensions (W x D x H) | Packing Weight |
|---|---|---|---|---|
| RT-1K External Battery Cabinet (Part number: BBA022B2009035) | 480 x 380 x 86 mm | 16 kg | 600 x 500 x 240 mm | 18.1 kg |
| RT-2K External Battery Cabinet (Part number: BBA042B5009035) | 438 x 480 x 86 mm | 28.6 kg | 700 x 565 x 240 mm | 31.5 kg |
| RT-3K External Battery Cabinet (Part number: BBA062B6009035) | 430 x 600 x 86 mm | 45.1 kg | 760 x 600 x 240 mm | 48.1 kg |
UPS Management Accessories
- Mini SNMP IPv6 (Part number: SCMS100035): Manages UPS and system functions securely and adjusts parameters through SNMP management stations or internet browsers using HTTP forms.
- Mini Relay I/O Card (Part number: 3915101864-S): Offers 6 relay output contacts to monitor status and 2 input contacts for simple shutdown and battery testing in UPS management.
- Mini Modbus Card (Part number: 3915101865-S): Supports Modbus communication with a PC via RS-485 and RS-232 interfaces, allowing for flexible and simultaneous use.
Installation
Rail Kit
Mount UPS and External Battery Cabinet within a 19" rack.
(Part number: 3915100011-S) Max weight: 40 kg
(Part number: 3798D000100008-S35) Max weight: 70 kg
