Electrolux UltimateHome 900
Instruction Book
Model Numbers: EFP91813/EFP91814/EFP91814WH/ EFP91824BU/EFP91824BR/EFP91825/ EFP91835/EFP91824GY/EFP91834/ EFP91822
Product Overview and Accessories
This section provides an overview of the Electrolux UltimateHome 900 vacuum cleaner and its various accessories. Some accessories are available only in specific models.
Available Accessories (May vary by model):
- Main unit with handle and dustbin
- Charging stand
- Various nozzles and brushes:
- Main floor nozzle (suitable for Carpet and Hard Floor)
- Crevice tool
- Upholstery nozzle
- Dusting brush
- PetPro nozzle
- Duster kit
- Home and car kit
- Duster kit
- BedProPower+
- BedProPowerUV+
- Standard pads
- Delicate pads
- Duster
- Trinity pet nozzle
Charging Information:
The vacuum cleaner charges fully in 2.5 hours, indicated by a 100% battery level. The charging indicator shows the battery status: 100%, 75-100%, 50-75%, 25-50%, and 0%.
Assembly and Setup
Follow these steps to assemble and set up your Electrolux UltimateHome 900:
- Charging Stand Assembly: Assemble the charging stand by connecting the base and upright components. Place accessories in their designated slots on the stand.
- Attaching the Wand and Nozzle: Connect the wand to the main unit. Attach the desired floor nozzle to the end of the wand. Ensure a secure click.
- Battery Installation: If the battery is removable, insert it into the designated compartment until it clicks into place.
Note: Ensure all parts are securely attached before use.
Operation
Turning On/Off: Press the power button to turn the vacuum on. Press again to turn it off.
Power Modes: The vacuum may feature different power modes (e.g., AUTO, MID, TURBO) selectable via a button. Refer to the display for the current mode and battery level.
Using Accessories: Attach the appropriate accessory for the cleaning task. For example, use the upholstery nozzle for furniture and the dusting brush for surfaces.
UV Functionality: Some models may include a UV light feature for sanitization. Ensure the UV light is activated as per the instructions.
Maintenance and Cleaning
Regular maintenance ensures optimal performance:
- Emptying the Dustbin: Release the dustbin by pressing the release button. Empty the contents into a trash receptacle.
- Cleaning the Filter: Remove the filter and tap out any dust. Wash the filter with water if necessary (check manual for specific filter type and washing instructions). Allow it to dry completely (24h) before reinserting. Do not exceed 40°C when washing.
- Cleaning the Brush Roll: Remove any tangled hair or debris from the brush roll. Some brush rolls can be removed for easier cleaning.
- Cleaning the Nozzles: Wipe the nozzles with a damp cloth. Ensure they are dry before storage.
Important: Always unplug the vacuum before performing any maintenance.
Troubleshooting and Safety
Troubleshooting:
- No Power: Check if the battery is charged. Ensure the dustbin and filters are clean and properly installed.
- Reduced Suction: Empty the dustbin and clean the filters. Check for blockages in the wand or nozzle.
Safety Precautions:
- Do not vacuum liquids or sharp objects.
- Keep the appliance away from heat sources and open flames.
- Do not use the vacuum outdoors or on wet surfaces.
- Supervise children when the appliance is in use.
- Refer to the manual for detailed safety instructions and warnings.
Warranty and Support
For warranty information and customer support, please visit the Electrolux website: www.electrolux.com.
Product Specifications
Model: UltimateHome 900
Power: (Specific wattage may vary, refer to product packaging or website)
Charging Time: 2.5 hours
Battery Type: Rechargeable Lithium-ion
For more detailed information, please refer to the complete user's manual available on the Electrolux website.