This LG LED TV uses an LCD screen with LED backlighting.
Please read this manual carefully before operating your appliance and retain it for future reference.
The model and serial number of the product are located on the back and side of the product. Record them below in case you need to contact customer service.
Model:
Serial No.:
Copyright © 2024 LG Electronics Inc. All rights reserved.
Before Reading This Manual
- Read this manual carefully before using your TV and keep it for future reference.
- You can download the full user manual, which includes installation, usage, troubleshooting, specifications, license, etc., from the LG website and view its contents on your PC or mobile device.
- User Manual: For more information on this TV, read the USER MANUAL included with the product. (Model dependent)
- To open the USER MANUAL: ⚙️ → [Support] → [User Manual]
Separately Purchased Items
- Separately purchased items may be subject to change or modification without prior notice for quality improvement. To purchase these items, contact your retailer. Devices only work with certain models.
- The model name or design may change depending on product function updates, manufacturer, and policies.
- The cable for connecting antennas to external devices must be purchased separately.
Note:- Product specifications or the contents of this manual may be subject to change without prior notice due to product function updates.
- Items supplied with the product may vary depending on the model.
- The TV shown in the image may differ from your actual TV.
Warning! Safety Instructions
⚠ CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
⚠ TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
⚠ This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
⚠ This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
- TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
- Do not place the TV and Remote Control in the following environments:
- Keep the product away from direct sunlight.
- In a place with high humidity, such as a bathroom.
- Near heat sources such as stoves or other heat-producing devices.
- Near kitchen counters or humidifiers, where it can be easily exposed to steam or oil splashes.
- In an area exposed to rain or wind.
- Do not expose to dripping or splashing water and do not place objects containing liquids (such as vases or cups) on the apparatus (e.g., on shelves above the unit).
- Keep the TV away from flammable objects (e.g., gasoline or candles) and air conditioners.
- Do not install in excessively dusty places, otherwise fire, electric shock, combustion or explosions, malfunctions or deformations of the product may occur.
- Ventilation:
- Install the TV in a properly ventilated place.
- Do not install the screen in confined spaces (e.g., in a bookshelf).
- Do not install the product on a carpet or cushion.
- Do not cover the product with cloth or other materials when connected to power.
- Do not touch the ventilation openings. When the TV remains on for a long time, the ventilation openings may become hot.
- Protect the power cord from physical or mechanical damage, avoiding it being twisted, knotted, pinched, trapped in a door, or stepped on. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
- Do not move the TV with the power cord connected.
- Do not use the product if the power cord is damaged or loose.
- Unplug the power cord from the screen by holding the plug, not by pulling the cord.
- To avoid the risk of fire or electric shock, do not connect too many devices to the same AC power outlet.
- Disconnecting the device from power: The power plug is the disconnecting device. In case of emergency, the power plug must be easily accessible.
- Prevent children from climbing or hanging on the TV. The product could fall and cause serious injury.
- External antenna grounding (may vary by country): If an external antenna is installed, follow these precautions. The external antenna must not be located near overhead power lines or other electric circuits or lighting, to avoid accidental contact with such lines causing serious or fatal injury.
- During thunderstorms, do not touch the appliance or antenna. Electric shocks may occur.
- To avoid fire and damage to the plug or outlet, ensure the power cord is correctly connected to the TV and wall outlet.
- Do not insert metallic or flammable objects into the product. If a foreign object falls into the product, unplug the power cord and contact customer service.
- If the power cord is connected, do not touch the ends to avoid electric shocks.
- If any of the following events occur, immediately unplug the product and contact your local customer service.
- The product has been damaged.
- Water or other substances have entered the product (e.g., into the AC adapter, power cord, or TV).
- Smoke or other odors coming from the TV.
- During thunderstorms or if the product remains unused for a long time.
- Even if the TV is turned off with the Remote Control or button, the AC power source remains connected; to completely disconnect it, you must unplug it.
- Do not use high-voltage electrical appliances (e.g., insect lamps) near the TV. This may cause product malfunction.
- Do not attempt to modify the product in any way without written authorization from LG Electronics, to avoid fire or electric shock. Contact your local customer service center for assistance or repair. Unauthorized modifications may void the user's right to use the product.
- Use only accessories approved by LG Electronics. The use of other accessories may cause fire, electric shock, malfunctions, or damage to the product.
- Never disassemble the AC adapter or power cord. There is a risk of electric shock or fire.
- Handle the adapter carefully to protect it from impacts and drops. An impact could damage the adapter.
- To reduce the risk of fire or electric shock, do not touch the TV with wet hands. If the power cord plug is wet or dusty, dry it completely or remove the dust.
- Batteries:
- Store accessories (batteries, etc.) in a safe place, out of reach of children.
- Do not short-circuit, disassemble the product, or expose batteries to excessive heat. Do not dispose of batteries in fire. Do not expose batteries to excessive heat.
- Caution: If the battery is replaced incorrectly, fire or explosions may occur.
- Moving:
- If you need to move the product, make sure it is turned off, the power cord is unplugged, and all cables are disconnected. For larger TVs, two or more people may be needed. Do not press or otherwise stress the front panel of the TV, to avoid damaging the product, causing fires, or personal injury.
- Keep anti-humidity material or vinyl packaging out of reach of children.
- Avoid impacting the product and be careful not to drop objects into the product or onto the screen.
- Do not press forcefully on the panel with your hand or sharp objects (e.g., fingernails, a pencil, or a pen) and do not scratch it. This may cause screen damage.
- Cleaning:
- To clean the product, first unplug the power cord and gently wipe the product with a soft, dry cloth.
- Do not spray water or other liquids directly onto the TV.
- Never use glass cleaners, air fresheners, insecticides, lubricants, waxes (for automobiles or industrial use), abrasives, thinners, benzene, alcohol, or similar products that can damage the product and its panel. To avoid damage or electric shock, do not use them.
Installation
Lifting and Moving the TV
Before lifting or moving the TV, read the following instructions to avoid scratching or damaging the appliance and for safe transport regardless of type and size.
- It is recommended to move the TV in its box or with the original packaging material.
- Before lifting or moving the TV, unplug the power cord and all cables.
- When gripping the TV, the screen should face away to avoid damage.
- Firmly grip the top and bottom of the TV frame. Be careful not to grip the transparent part, speaker, or speaker grille.
- For transporting large TVs, 2 people are required.
- During transport, do not expose the TV to oscillations or excessive vibrations.
- During transport, keep the TV upright, do not rotate it on its side or tilt it forward or to the right or left.
- Avoid applying excessive pressure as this could bend/curve the frame and, consequently, damage the screen.
- When using the TV, be careful not to damage protruding buttons.
⚠ Avoid continuously touching the screen to avoid damaging it.
⚠ When connecting the stand to the TV, place the screen face down on a flat surface to protect it from scratches.
Mounting on a Table
- Lift and tilt the TV to a vertical position on a table. Leave a minimum of 10 cm space from the wall to ensure adequate ventilation.
- Connect the power cord to the wall outlet.
- Do not apply foreign substances (oils, lubricants, etc.) to any part of the screws during product assembly. (Otherwise, the product may be damaged.)
- To ensure product safety and durability, do not use counterfeit products.
- Damage or injury caused by aggressive products are not covered by the warranty.
- If installing the TV on a stand, take precautions to prevent it from tipping over. Otherwise, the product could fall and cause injury to people.
- When assembling the stand, ensure all supplied screws are fastened. If the screws are not fully tightened, the product may tilt or tip over, causing damage. Overtightening the screws can cause them to detach due to abrasion at the screw joint.
Wall Mounting
- Insert and fasten the eyebolts or TV brackets and bolts on the back of the TV. If there are bolts inserted in the eyebolt position, remove them.
- Mount the brackets to the wall with screws. Match the position of the bracket and eyebolts on the back of the TV.
- Securely tie the eyebolts to the brackets with a robust cord. Ensure the cord is horizontal with the flat surface.
- Use a sufficiently large and sturdy table or furniture to properly support the TV.
- Brackets, bolts, and cords are not supplied. Optional accessories can be purchased from your local trusted retailer.
Mounting the TV on a Wall
Mount the wall mount bracket component on the back of the TV and fasten the bracket to a solid wall perpendicular to the floor. For fastening the TV to other building materials, contact qualified personnel. LG recommends having wall mounting performed by an experienced qualified installer. Use a wall mount bracket that allows for proper TV installation, leaving adequate space for connecting external devices. It is recommended to connect all cables before installing and fastening the wall mounts.
⚠ Remove the stand before fastening the TV to a wall mount bracket, by reversing the stand connection procedure.
- For more information on screws and wall mount brackets, consult the manual included with the separately purchased wall mount bracket.
- If you intend to mount the product on a wall, connect the standard VESA mounting interface (optional parts) to the back of the product. When installing the set to use the wall mount bracket (optional parts), fasten it securely so it cannot fall.
- During mounting, pay particular attention not to crush electrical and signal cables located on the back of the TV.
- Do not install the product on a wall if it is exposed to oil or liquid paraffin. The product could be damaged or fall.
- During wall mount bracket installation, it is recommended to cover the stand hole with adhesive tape to prevent dust and insects from entering. (Model dependent)
Antenna/Cable
Connect the TV to the central antenna with an RF cable (75 Ω).
- Use a signal splitter to use more than 2 TVs.
- If the image quality is poor, properly install a signal amplifier to improve it.
- If the image quality is poor with a connected antenna, try realigning the antenna in the correct direction.
- The cable and antenna converter are not supplied.
- In areas where there is no Ultra HD TV signal coverage, the TV may not receive Ultra HD programs. (Model dependent)
Satellite Antenna
Connect the TV to a satellite antenna and a satellite outlet with a satellite RF cable (75 Ω). (Model dependent)
Starting the TV
You can activate the TV functions by pressing the button.
| Button Symbol | Function |
|---|
| ⑁ | Power On (Press) |
| ⑁ | Power Off1) (Press and hold) |
| ⑁ | Menu Control2) (Press) |
| ⑁ | Menu Selection3) (Press and hold) |
- All running apps will be closed, and any recording processes will be interrupted. (Country dependent)
- You can access and adjust the menu by pressing the button while the TV is on.
- You can use the function when accessing the menu control.
Note:- If the TV is turned on for the first time after being shipped from the factory, initialization may take several minutes.
- The TV OSD (On Screen Display) menu may differ slightly from what is shown in this manual.
- Place the product in a position where the power outlet is easily accessible. Some devices do not have a power on/off button, so the power cord must be unplugged to turn them off.
Connections
Connect various external devices to the TV and change the input mode to select an external device. For more information on connecting an external device, consult the manual supplied with each device.
HDMI
- To connect the HDMI cable, the product and external devices must be turned off and unplugged.
- Supported HDMI audio formats (Model dependent): True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
Note:- If the device connected to the Input port also supports HDMI Deep Colour, the image will be clearer. However, if the functionality is not supported, the device may not function correctly. In this case, change the TV's [HDMI Deep Colour] setting to Off. (Model dependent)
- ⚙️ → ② → [General] → [External Devices] → [HDMI Settings] → [HDMI Deep Colour] (Model dependent)
- Use a certified cable with the HDMI logo.
- Otherwise, the screen may not function or a connection problem may occur.
- Recommended HDMI cable types: High-speed HDMI®/™ cable (3 m or less)
USB
Some USB hubs may not function. If a USB peripheral connected via a USB hub is not detected, connect it directly to the TV's USB port. (Model dependent)
Note:- For optimal connection, USB peripherals and HDMI cables should have bezels less than 10 mm thick and width less than 18 mm. If the USB cable or USB memory stick is not compatible with the TV's USB port, use an extension cable that supports USB 2.0. (Model dependent)
External Devices
You can connect the following external devices: Blu-ray players, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, game consoles, and other external devices.
Note:- External device connection may vary by model.
- In PC mode, resolution, vertical patterns, contrast, or brightness interference may occur. In case of interference, change the PC mode by setting another resolution or changing the refresh rate, or adjust brightness and contrast in the [Picture] menu until a clear image is obtained.
- Depending on the graphics card used, some resolution settings may not be suitable for PC mode.
- If Ultra HD content is played on PC, video or audio may be interrupted depending on PC performance. (Model dependent)
- For wired LAN connection, use a high-bandwidth CAT 7 cable. (Only if LAN port is present.)
Technical Specifications
| Power Requirements | 110-240 V AC~ 50/60 Hz |
|---|
| (Country dependent) | |
Transmission Specifications
| TV System | Terrestrial / Cable / Satellite Digital TV |
|---|
| External Antenna Impedance | 75 Ω |
Environmental Conditions
| Operating Temperature | 0 °C to 40 °C | Storage Temperature | -20 °C to 60 °C |
|---|
| Operating Humidity | Less than 80% | Storage Humidity | Less than 85% |
- For information on power supply and energy consumption, consult the product label on the back.
- Typical energy consumption is measured in accordance with IEC 62087 standard or energy regulations in each country.
- * In some models, the label is located inside the cover of the external device connection terminal.
- * Depending on the model or country, the label may not indicate typical energy consumption.
Product Information
Open Source Software Notice
To obtain the source code under GPL, LGPL, MPL, and other open source licenses that require disclosure of the source code, contained in this product, and to access all cited license terms, copyright notices, and other relevant documents, visit https://opensource.lge.com.
LG Electronics will also provide the open source code on CD-ROM upon request via email at opensource@lge.com for a charge covering the cost of distribution (e.g., cost of media, shipping, and handling). This offer is valid for anyone who receives this information for a period of three years from our last shipment of this product.
Licenses
Ⓢ HDMI
HIGH-DEFINITION MULTIMEDIA INTERFACE
QUICKSET®
(Only models that support the Pointer Remote Control)
HEVC Advance
Covered by patents at patentlist.accessadvance.com
Troubleshooting
To display the model number and serial number on the screen, select the TV input or one of the HDMI inputs and press the ⑁ button on the remote control three times.
| Issue | Solution |
|---|
| Cannot control TV with Remote Control. | - Check the Remote Control sensor on the product and try again.
- Check for any obstacles between the screen and the Remote Control.
- Check that the batteries are still charged and correctly inserted (⊕ to ⊖).
|
| No image displayed and no sound produced. | - Check that the screen is on.
- Check that the power cord is connected to a wall outlet.
- Check if there is a problem with the wall outlet by connecting other products.
|
| TV turns off suddenly. | - Check the power control settings. Power may have been interrupted.
- Check if the automatic shutdown function is activated in the timer settings.
- The automatic shutdown function may have been activated. This product has an automatic shutdown function that automatically turns off the TV if you do not use the remote control for 15 minutes in the absence of an input signal.
|
| When connecting the screen to a PC (HDMI), no signal is detected. | - Turn the TV off/on using the Remote Control.
- Reconnect the HDMI cable.
- Restart the PC with the TV on.
|
| Display Issues | - If the product feels cold to the touch, a slight “tremor” of the image may occur when turned on. This is normal behavior and does not indicate a product malfunction.
- This panel is an advanced product containing millions of pixels. You may see tiny black dots and/or other vivid colored dots (red, blue, or green) with a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect product performance and reliability. This phenomenon also occurs in third-party products and does not entitle you to product replacement or compensation.
- The brightness and color of the panel may differ depending on the viewing position (left/right/top/bottom). This phenomenon is due to the characteristics of the panel. It has nothing to do with product performance and does not indicate a malfunction.
- Avoid touching the screen or pressing on it with your fingers for too long. Otherwise, temporary distortion effects on the screen may occur.
- Displaying a fixed image for a prolonged period may cause image persistence. Avoid displaying fixed images on the TV screen for a prolonged period.
|
| Sounds and noises produced by the screen | - “Crack”: The crack heard when turning the TV on or off is generated by the thermal contraction of the plastic caused by temperature and humidity. This noise is common in products that undergo deformation due to thermal agents.
- Panel or electrical circuit buzzing: The high-speed switching circuit produces a slight noise due to the passage of a large amount of electrical energy required for product operation. The noise varies depending on the product. The generated sound does not affect product performance and reliability.
|
⚠ When cleaning the product, be careful not to allow liquid infiltration or foreign objects to enter the space between the top, left, or right side of the panel and the corresponding guide. (Model dependent)
⚠ Make sure to remove any excess water or detergent by wringing the cloth.
⚠ Do not spray water or detergent directly onto the TV screen.
⚠ Make sure to spray the correct amount of water or detergent onto a dry cloth to clean the screen.
Using the Remote Control
The descriptions in this manual are based on the Remote Control buttons. Read this manual carefully and use the TV correctly. (Some buttons and services may not be available depending on models or regions.) (Model dependent)
| Button | Description |
|---|
| ⑁ | Power: Turns the TV on or off. |
| TEXT, T.OPT | Teletext Buttons: These buttons are used for teletext. |
| ⑁ | Shows the Program Guide. |
| QUICK ACCESS | Allows modifying QUICK ACCESS. QUICK ACCESS is a function that allows direct activation of Live TV or a specific app by pressing and holding the number buttons. |
| ⑁ | Input: Allows changing the input source. |
| AD | Activates the audio description function. |
| 1-9, 0 | Number Buttons: For entering numbers. |
| ⑁ | Allows access to [Quick Help]. |
| ⑁ | More Actions: Shows more Remote Control functions. |
| ⑁ | Volume Buttons: Adjusts the volume level. |
| ⑁ | Mute: Mutes all sounds. |
| ⑁ | Mute: Accesses the [Accessibility] menu. |
| ⑁ | Program Buttons: Scrolls through saved programs. |
| ⑁ | Search: Checks recommended content. (Some recommended services may not be available in some countries). Allows searching for content, such as TV programs, movies, and other videos, or performing a Web search by entering search terms in the search box. |
| OK | OK: Selects menu and options and confirms selections. |
| OK | OK: Accesses [Magic Explorer]. When using [TV Guide], [Settings], [Sports Alert], or [Art Gallery], press and hold the text. |
| LIST | Allows access to the saved program list. |
| ⑁ | You can watch TV or LG Channels. |
| ⑁ | Control Buttons: Control buttons for multimedia content. |
| ⑁ | Home: Accesses the main menu. |
| ⑁ | Allows starting recording and displays the recording menu. (Only Time MachineReady models supported) |
| ⑁ | Home: Launches recently used apps. |
| ⑁ | Navigation Buttons (up/down/left/right): Allows scrolling through menus and options. |
| ⑁ | Back: Returns to the previous level. |
| ⑁ | Allows clearing all screens from view and accessing the Home menu. |
| ⑁ | Allows access to special functions in some menus. |
| ⑁ | Various Service Buttons: Allows choosing between different services, such as streaming and voice search. |
** To use the button, press and hold for more than 1 second.
