User Manual for GOTRAX models including: I9 Electric Scooter, I9, Electric Scooter, Scooter
Gotrax Eclipse Electric Scooter, 10" Pneumatic Tire, Max 28 Mile and 20 Mph 500W Motor with Front Double Suspension, Foldable Escooter for Adult Black : Sports & Outdoors
ECLIPSE User Manual (PDF) Gotrax ZHEJIANG TAOTAO VEHICLES CO.,LTD Gotrax,Electric,Scooter,-10",Pneumatic,Tires,,MAX,20/28/38,Miles,Range,,20Mph,Power,by,350W/500W,Motor,,All,Aluminum,Body,,Digital,Display,and,Cruise,Control,Foldable,Commuter,E-Scooter,for,Adult,B0CWLSCKN6,B0C1SWJ5NF,B0C1SVTXSJ,B093T2Y1WV,B0BV5N519C
ECLIPSE User Manual (PDF) Gotrax ZHEJIANG TAOTAO VEHICLES CO.,LTD Gotrax,Electric,Scooter,for,Adults,500W,Motor,10",Solid,Tire,Max,28-42,Miles,Range,20Mph,Top,Speed,with,Electric,Code,Lock,Long,Battery,Life,Foldable,Commuting,Electric,Scooter,UL2272,Certificated,28mile,500w,B0DRKFQ8T9,B093T2Y1WV
ECLIPSE
264 lbs (120kg) (32 km/h).
20 mph
4
20 mph 25-28 miles 264 lbs (120kg) 36V 12Ah DC 42V 2.0A About 6-7 hours 500W AC 100-240V~50/60Hz 2.5A
Lift the tiller upright (as shown in the figure). Once the scooter is locked in the upright position, verify by gently trying to fold.
About 6-7 hours.
On/OFF machine: Long press 3 seconds the power button to turn on/off, the buzzer will "di" sound, and the scooter will shut down automatically after 5 minutes without any oration.
Shift gears: Press the power button to change gears. The speed is 0-3 MPH in pedestrian mode in 1st gear ( ), 0-15.5 MPH in icon speed in 2nd gear (D), and 0-20 MPH in icon speed in 3rd gear (S).
Light: Press the power button twice continuously to turn on and off the headlights and taillights (taillights are slightly bright), the taillights are highly bright when braking, and the atmosphere lights are automatically lit when starting (breathing light).
Process unit display switch: press the power button three times
Fixed cruise: Keep the throttle at the same speed for 8-10 seconds, the buzzer will emit a "di" sound, and the fixed cruise icon will light up at the same times to enter the fixed cruise mode. You can exit the cruise mode by twisting the throttle, brake or changing gears again.
Password lock function: 1. After starting up the scooter, press the throttle once and reset it to increase the password figure, braking the brake handlebar once and reset it to decrease the password figure, click the power button to switch the password number, double-click the power button to confirm that the password input is complete, the standard password is 000.
2. Turn it on again with password status, enter the correct password and press the power button 4 times within 10 seconds to enter the password change mode , on the change password mode even 4 times the power button, or 1 minutes without any operation , the new password will not saved and exit the mode , even in cipher amending mode according to the power button twice, save the modified password and exit the mode.
3. In the password off mode, press the power button 6 times to enable the password function. In the password on mode, press the power button 6 times to disable the password function.
Speed units Headlights ico
PRNDS The Brake Logo
Power Switch
Driving speed
Cruise Control Mileage Top Battery
8. Brake Light Status: The taillights is also the brake light. When you turn on the headlight, the brake light will steady on. When you hold the handlebrake, The taillights will be highly bright, reminding the vehicles and pedestrians behind.
Tightening the Tiller: If you notice that the tiller is loose or wiggles while riding, you can tighten the screws. Open the plastic cover, and use the Allen wrench to tighten the screws as shown in the figure below. (Figure 1)
Brake adjustment: If the brake is too tight against the brake, turn the brake cable nut counterclockwise to loosen the brake cable, if the brake is too loose, turn the brake wcable nut clockwise to tighten the brake cable. (Figure 2)
Figure 1
Figure 2
Adobe PDF library 15.00 Adobe Illustrator 25.0 (Windows)