FCC Part 15B Test Report for Xiaomi Tablet Computer (Model 25040RP0AL)

Report History

Report Number	Revision	Description	Issue Date
25T04Z100138-003	Rev.0	1st edition	2025-03-05

Note: the latest revision of the test report supersedes all previous versions.

1. Test Laboratory

1.1. Introduction & Accreditation

Telecommunication Technology Labs, CAICT is an ISO/IEC 17025:2017 accredited test laboratory under American Association for Laboratory Accreditation (A2LA) with lab code 7049.01, and is also an FCC accredited test laboratory (CN1349), and ISED accredited test laboratory (CAB identifier:CN0066). The detail accreditation scope can be found on A2LA website.

1.2. Testing Location

CTTL (huayuan North Road)

Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191

1.3. Testing Environment

Normal Temperature: 15-35°C

Relative Humidity: 20-75%

1.4. Project Data

Testing Start Date: 2025-02-17

Testing End Date: 2025-02-18

1.5. Signature

Wang Xue (Prepared this test report)

Zhang Ying (Reviewed this test report)

Zhang Xia (Approved this test report)

2. Client Information

2.1. Applicant Information

Company Name: Xiaomi Communications Co., Ltd.

Address /Post: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Contact Name: Zeng Qingyao

Telephone: 010-60606666-8088

Fax: 010-60606666-1101

E-mail: mi-compliance@xiaomi.com

2.2. Manufacturer Information

Company Name: Xiaomi Communications Co., Ltd.

Address /Post: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Contact Name: Zeng Qingyao

Telephone: 010-60606666-8088

Fax: 010-60606666-1101

E-mail: mi-compliance@xiaomi.com

3. Equipment Under Test (EUT) and Ancillary Equipment (AE)

3.1. About EUT

Description: Tablet Computer

Model Name: 25040RP0AL

FCC ID: 2AFZZRP0AL

Note: Components list, please refer to documents of the manufacturer; it is also included in the original test record of CTTL, Telecommunication Technology Labs, CAICT.

3.2. Internal Identification of EUT used during the test

EUT ID*	SN or IMEI	HW Version	SW Version
UT20a	b67pcaeavozp4dov	135100O84	Xiaomi HyperOS 2.1

*EUT ID: is used to identify the test sample in the lab internally.

3.3. Internal Identification of AE used during the test

AE ID*	Description	Model	Remark
AE1-1	Battery	/	1st source
AE1-2	Battery	/	2nd source no test
AE2-1	Adapter1	/	/
AE2-2	Adapter2	/	/
AE3-1	Cable USB-TypeC 1	/	/
AE3-2	Cable USB-TypeC 2	/	/
AE3-3	Cable USB-TypeC 3	/	/
AE3-4	Cable USB-TypeC 4	/	/
AE4	Earphone	/	Provided by laboratory

*AE ID: is used to identify the test sample in the lab internally.

3.4. EUT Set-ups

No.	EUT set-up Combination of EUT and AE	Remarks
Set.1	UT20a + AE1-1 + AE2-1 + AE3-1	Adapter1+Cable1+ Front Camera
Set.2	UT20a + AE1-1 + AE2-2 + AE3-2	Adapter2+Cable2+Rear Camera
Set.3	UT20a + AE1-1 + AE2-1 + AE3-1	Adapter1+Cable1+MP4 player from SD Card
Set.4	UT20a + AE1-1 + AE4	Earphone FM Rx
Set.5	UT20a + AE1-1 + AE3-1 + PC	Copy data from EUT to PC
Set.6	UT20a + AE1-1 + AE3-2 + PC	Copy data from PC to EUT
Set.7	UT20a + AE1-1 + AE3-3 + PC	Copy data from SD Card to PC
Set.8	UT20a + AE1-1 + AE3-4 + PC	Copy data from PC to SD Card

Note: Equipment Under Test (EUT) is a model of Tablet Computer. It has MP3, Camera, USB memory, OTG, Bluetooth 5.3, Wi-Fi 2.4G (802.11b/g/n, support 20MHz bandwidth), Wi-Fi 5G(802.11a/n/ac, 802.11n support 20MHz and 40MHz bandwidth, 802.11ac support 20MHz, 40MHz, and 80MHz bandwidth), and FM Rx functions. The device contains receivers which tune and operate between 30MHz-960MHz in the following mode: FM Rx. All licensed band receivers that tune in the range of 30MHz-960MHz are investigated. Only the worst-case emissions are reported.

4. Reference Documents

4.1. Reference Documents for testing

The following documents listed in this section are referred for testing.

Reference	Title	Version
FCC Part 15, Subpart B	Radio frequency devices - Unintentional Radiators	2024
ANSI C63.4	American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz	2014

Note: The test methods have no deviation with standards.

5. Laboratory Environment

Semi-anechoic chamber SAC-1

Did not exceed following limits along the EMC testing:

Parameter	Limit
Temperature	Min. = 15 °C, Max. = 35 °C
Relative humidity	Min. = 15 %, Max. = 75 %
Shielding effectiveness	0.014MHz-1MHz, >60dB; 1MHz - 1000MHz, >90dB.
Electrical insulation	> 2 MΩ
Ground system resistance	< 4Ω
Normalised site attenuation (NSA)	< ±4 dB, 3m distance
Site voltage standing-wave ratio (SVSWR)	Between 0 and 6 dB, from 1GHz to 6GHz
Uniformity of field strength	Between 0 and 6 dB, from 80 to 6000 MHz

Shielded room

Did not exceed following limits along the EMC testing:

Parameter	Limit
Temperature	Min. = 15 °C, Max. = 35 °C
Relative humidity	Min. = 20 %, Max. = 75 %
Shielding effectiveness	0.014MHz-1MHz, >60dB; 1MHz-1000MHz, >90dB.
Electrical insulation	> 2 MΩ
Ground system resistance	< 4Ω

6. Summary of Test Results

Abbreviations used in this clause:

Verdict Column
P	Pass
NA	Not applicable
F	Fail

Items	Test Name	Clause in FCC rules	Section in this report	Verdict	Test Location
1	Radiated Emission	15.109(a)	B.1	P	CTTL(huayuan North Road)
2	Conducted Emission	15.107(a)	B.2	P	CTTL(huayuan North Road)

7. Test Equipments Utilized

NO.	Description	TYPE	SERIES NUMBER	MANUFACTURE	CAL DUE DATE	CALIBRATION INTERVAL
1	Test Receiver	ESW44	103023	R&S	2025-06-06	1 year
2	Test Receiver	ESCI 3	100344	R&S	2025-04-01	1 year
3	LISN	ENV216	101200	R&S	2025-05-16	1 year
4	EMI Antenna	VULB 9163	01222	SCHWARZBECK	2025-09-11	1 year
5	EMI Antenna	3115	00167250	ETS-Lindgren	2025-04-11	1 year
6	Broadcast Test Center	BTC	101024	R&S	2025-04-01	1 year

Test software information

Test Item	Software	Version
Radiated Emission	EMC32	V11.50.00
Conducted Emission	EMC32	V8.53.0

ANNEX A: MEASUREMENT RESULTS

A.1 Radiated Emission

Reference: FCC: CFR Part 15.109(a).

A.1.1 Method of measurement

The field strength of radiated emissions from the unintentional radiator (USB/OTG mode of MS and charging mode of MS) at distances of 3 meters is tested. Tested in accordance with the procedures of ANSI C63.4 – 2014, section 8.3. The EUT was placed on a non-conductive table. The measurement antenna was placed at a distance of 3/10 meters from the EUT. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations.

A.1.2 EUT Operating Mode

The MS is operating in the USB mode, OTG mode and charging mode. During the test MS is connected to a PC via a USB cable in the case of USB mode, and is connected to the other device for charging in OTG mode and is connected to a charger in the case of charging mode. The EUT was tested while operating in licensed band Rx mode. All licensed band receivers that tune in the range of 30MHz-960MHz, as listed in section 3.4, are investigated. Only the worst case emissions are reported. All equipment is placed on the test table top and arranged in a typical configuration in accordance with ANSI C63.4-2014 and manipulated to obtain worst case emissions. The model of the PC is M4000E-17, and the serial number of the PC is M706GWXD. The software is used to let the PC keep on copying data to MS, reading and erasing the data after copy action was finished. Note: I/O information: Printer – USB, Mouse – PS/2, Keyboard – USB.

A.1.3 Measurement Limit

Frequency range (MHz)	Field strength limit (µV/m)
	Quasi-peak	Average	Peak
30-88	100
88-216	150
216-960	200
960-1000	500
>1000	500	5000

Note: the above limit is for 3 meters test distance. 10 meters' limit is got by converting.

A.1.4 Test Condition

Frequency range (MHz)	RBW/VBW	Sweep Time (s)	Detector
30-1000	120kHz (IF Bandwidth)	5	Peak/Quasi-peak
Above 1000	1MHz/3MHz	15	Peak, Average

A.1.5 Measurement Results

A "reference path loss" is established and the ARpl is the attenuation of “reference path loss”. It includes the antenna factor of receive antenna and the path loss. The measurement results are obtained as described below: Result = PMea + ARpl = PMea + GA + GPL Where GA: Antenna factor of receive antenna GPL: Path Loss PMea: Measurement result on receiver. Measurement uncertainty (worst case): U = 4.84 dB, k=2.

Measurement results for Set.1: Charing Mode: Adapter1+Cable1+ Front Camera

Average detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17972.100	41.98	-26.80	42.30	26.48	54.00	12.02	V
17966.700	41.90	-26.80	42.30	26.40	54.00	12.10	V
17898.700	41.64	-26.80	42.30	26.14	54.00	12.36	V
17975.200	41.60	-26.80	42.30	26.10	54.00	12.40	H
17982.300	41.57	-26.80	42.30	26.07	54.00	12.43	V
17995.600	41.57	-26.80	42.30	26.07	54.00	12.43	H

Peak detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17995.900	52.51	-26.80	42.30	37.01	74.00	21.49	V
17955.800	52.26	-26.80	42.30	36.76	74.00	21.74	V
17989.800	52.22	-26.80	42.30	36.72	74.00	21.78	H
17711.300	51.99	-28.23	42.30	37.92	74.00	22.01	H
17871.500	51.97	-26.80	42.30	36.47	74.00	22.03	H
17970.800	51.84	-26.80	42.30	36.34	74.00	22.16	V

Fig A.1 shows the radiated emission plot from 30MHz to 1GHz for Set.1. Fig A.2 shows the radiated emission plot from 1GHz to 18GHz for Set.1.

Measurement results for Set.2: Charing Mode: Adapter2+Cable2+Rear Camera

Average detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17963.300	42.02	-26.80	42.30	26.52	54.00	11.98	H
17974.500	41.90	-26.80	42.30	26.40	54.00	12.10	V
17990.100	41.76	-26.80	42.30	26.26	54.00	12.24	H
17953.400	41.70	-26.80	42.30	26.20	54.00	12.30	V
17983.000	41.63	-26.80	42.30	26.13	54.00	12.37	V
17984.400	41.58	-26.80	42.30	26.08	54.00	12.42	V

Peak detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17893.900	53.18	-26.80	42.30	37.68	74.00	20.82	V
17986.400	52.65	-26.80	42.30	37.15	74.00	21.35	V
17953.400	51.92	-26.80	42.30	36.42	74.00	22.08	V
17929.600	51.89	-26.80	42.30	36.39	74.00	22.11	V
17973.100	51.84	-26.80	42.30	36.34	74.00	22.16	H
17985.000	51.83	-26.80	42.30	36.33	74.00	22.17	V

Fig A.3 shows the radiated emission plot from 30MHz to 1GHz for Set.2. Fig A.4 shows the radiated emission plot from 1GHz to 18GHz for Set.2.

Measurement results for Set.3: Charing Mode: Adapter1+Cable1+MP4 player from SD Card

Average detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17990.500	42.22	-26.80	42.30	26.72	54.00	11.78	V
17979.300	41.98	-26.80	42.30	26.48	54.00	12.02	H
17991.800	41.91	-26.80	42.30	26.41	54.00	12.09	V
17972.100	41.58	-26.80	42.30	26.08	54.00	12.42	H
17954.100	41.56	-26.80	42.30	26.06	54.00	12.44	V
17974.800	41.54	-26.80	42.30	26.04	54.00	12.46	H

Peak detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17988.800	52.86	-26.80	42.30	37.36	74.00	21.14	H
17888.500	52.04	-26.80	42.30	36.54	74.00	21.96	V
17955.500	52.00	-26.80	42.30	36.50	74.00	22.00	H
17964.000	51.89	-26.80	42.30	36.39	74.00	22.11	V
17986.700	51.89	-26.80	42.30	36.39	74.00	22.11	H
17994.200	51.87	-26.80	42.30	36.37	74.00	22.13	V

Fig A.5 shows the radiated emission plot from 30MHz to 1GHz for Set.3. Fig A.6 shows the radiated emission plot from 1GHz to 18GHz for Set.3.

Measurement results for Set.4: Earphone FM Rx

Average detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17991.500	41.79	-26.80	42.30	26.29	54.00	12.21	V
17975.200	41.72	-26.80	42.30	26.22	54.00	12.28	V
17995.600	41.58	-26.80	42.30	26.08	54.00	12.42	V
17925.200	41.53	-26.80	42.30	26.03	54.00	12.47	V
17969.100	41.49	-26.80	42.30	25.99	54.00	12.51	V
17989.100	41.47	-26.80	42.30	25.97	54.00	12.53	H

Peak detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17990.500	52.21	-26.80	42.30	36.71	74.00	21.79	H
17975.500	51.89	-26.80	42.30	36.39	74.00	22.11	V
17976.500	51.84	-26.80	42.30	36.34	74.00	22.16	V
17971.400	51.81	-26.80	42.30	36.31	74.00	22.19	V
17969.700	51.71	-26.80	42.30	36.21	74.00	22.29	V
17992.500	51.65	-26.80	42.30	36.15	74.00	22.35	V

Fig A.7 shows the radiated emission plot from 30MHz to 1GHz for Set.4. Fig A.8 shows the radiated emission plot from 1GHz to 18GHz for Set.4.

Measurement results for Set.5: USB Data Copy Mode: Copy data from EUT to PC with cable 1

Average detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
6056.800	47.71	-36.15	35.40	48.46	54.00	6.29	V
6057.200	46.21	-36.15	35.40	46.96	54.00	7.79	V
6056.500	44.46	-36.15	35.40	45.21	54.00	9.54	V
17978.600	42.07	-26.80	42.30	26.57	54.00	11.93	H
17967.700	41.89	-26.80	42.30	26.39	54.00	12.11	H
17986.100	41.75	-26.80	42.30	26.25	54.00	12.25	H

Peak detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17933.700	52.43	-26.80	42.30	36.93	74.00	21.57	V
17884.700	52.32	-26.80	42.30	36.82	74.00	21.68	V
17947.300	52.16	-26.80	42.30	36.66	74.00	21.84	H
17965.300	52.05	-26.80	42.30	36.55	74.00	21.95	H
17878.600	52.01	-26.80	42.30	36.51	74.00	21.99	V
17971.100	51.90	-26.80	42.30	36.40	74.00	22.10	V

Fig A.9 shows the radiated emission plot from 30MHz to 1GHz for Set.5. Fig A.10 shows the radiated emission plot from 1GHz to 18GHz for Set.5.

Measurement results for Set.6: USB Data Copy Mode: Copy data from PC to EUT with Cable2

Average detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
6055.800	47.11	-36.15	35.40	47.86	54.00	6.89	V
6055.500	46.83	-36.15	35.40	47.58	54.00	7.17	V
6055.100	43.78	-36.15	35.40	44.53	54.00	10.22	V
17965.300	41.84	-26.80	42.30	26.34	54.00	12.16	V
17978.200	41.64	-26.80	42.30	26.14	54.00	12.36	V
17980.600	41.50	-26.80	42.30	26.00	54.00	12.50	H

Peak detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17973.100	52.60	-26.80	42.30	37.10	74.00	21.40	H
17852.800	52.02	-26.80	42.30	36.52	74.00	21.98	H
17840.900	51.93	-26.80	42.30	36.43	74.00	22.07	V
17903.100	51.84	-26.80	42.30	36.34	74.00	22.16	H
17915.700	51.83	-26.80	42.30	36.33	74.00	22.17	V
17976.900	51.82	-26.80	42.30	36.32	74.00	22.18	H

Fig A.11 shows the radiated emission plot from 30MHz to 1GHz for Set.6. Fig A.12 shows the radiated emission plot from 1GHz to 18GHz for Set.6.

Measurement results for Set.7: USB Data Copy Mode: Copy data from SD Card to PC with Cable3

Average detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
6054.400	47.37	-36.15	35.40	48.12	54.00	6.63	V
6054.800	46.89	-36.15	35.40	47.64	54.00	7.11	V
6054.100	42.77	-36.15	35.40	43.52	54.00	11.23	V
17993.200	41.78	-26.80	42.30	26.28	54.00	12.22	V
17982.700	41.77	-26.80	42.30	26.27	54.00	12.23	H
6055.100	41.69	-36.15	35.40	42.44	54.00	12.31	V

Peak detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17830.300	52.07	-26.80	42.30	36.57	74.00	21.93	V
17983.000	51.92	-26.80	42.30	36.42	74.00	22.08	H
17968.000	51.82	-26.80	42.30	36.32	74.00	22.18	V
17979.600	51.75	-26.80	42.30	36.25	74.00	22.25	V
17970.400	51.72	-26.80	42.30	36.22	74.00	22.28	H
17998.000	51.67	-26.80	42.30	36.17	74.00	22.33	V

Fig A.13 shows the radiated emission plot from 30MHz to 1GHz for Set.7. Fig A.14 shows the radiated emission plot from 1GHz to 18GHz for Set.7.

Measurement results for Set.8: USB Data Copy Mode: Copy data from PC to SD Card with Cable4

Average detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
6053.800	47.85	-36.15	35.40	48.60	54.00	6.15	V
6054.100	45.61	-36.15	35.40	46.36	54.00	8.39	V
6053.400	44.80	-36.15	35.40	45.55	54.00	9.20	V
17985.000	41.83	-26.80	42.30	26.33	54.00	12.17	H
17971.400	41.72	-26.80	42.30	26.22	54.00	12.28	H
17984.000	41.71	-26.80	42.30	26.21	54.00	12.29	V

Peak detector

Frequency (MHz)	Measurement Result (dBμV/m)	Cable loss (dB)	Antenna Factor (dB/m)	Receiver Reading (dBμV)	Limit (dBμV/m)	Margin (dB)	Antenna Pol. (H/V)
17971.400	52.09	-26.80	42.30	36.59	74.00	21.91	H
17966.700	52.03	-26.80	42.30	36.53	74.00	21.97	H
17979.900	52.01	-26.80	42.30	36.51	74.00	21.99	H
17919.100	51.97	-26.80	42.30	36.47	74.00	22.03	H
17983.000	51.84	-26.80	42.30	36.34	74.00	22.16	H
17974.800	51.73	-26.80	42.30	36.23	74.00	22.27	V

Fig A.15 shows the radiated emission plot from 30MHz to 1GHz for Set.8. Fig A.16 shows the radiated emission plot from 1GHz to 18GHz for Set.8.

A.2 Conducted Emission

Reference: FCC: CFR Part 15.107(a).

A.2.1 Method of measurement

For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits. Tested in accordance with the procedures of ANSI C63.4 – 2014, section 7.3.

A.2.2 EUT Operating Mode

The MS is operating in the USB mode and charging mode. During the test MS is connected to a PC via a USB cable in the case of USB mode and is connected to a charger in the case of charging mode. The model of the PC is DELL M4000E-17, and the serial number of the PC is M706GWXD. The software is used to let the PC keep on copying data to MS, reading and erasing the data after copy action was finished. Note: I/O information: Printer – USB, Mouse – PS/2, Keyboard – USB.

A.2.3 Measurement Limit

Frequency of emission (MHz)	Conducted limit (dBμV)
	Quasi-peak	Average
0.15-0.5	66 to 56*	56 to 46*
0.5-5	56	46
5-30	60	50

*Decreases with the logarithm of the frequency

A.2.4 Test Condition in charging mode

Voltage (V)	Frequency (Hz)	RBW/IF bandwidth	Sweep Time(s)
120	60	9kHz	1

A.2.5 Measurement Results

Measurement uncertainty: U= 3.08 dB, k=2.

Charging Mode, Set.1(Adapter1+Cable1+ Front Camera):

Fig A.17 shows the conducted emission plot from 150kHz to 30MHz for Set.1.

Final Result 1

Frequency (MHz)	QuasiPeak (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.174000	59.0	2000.0	9.000	On	L1	19.9	5.8	64.8
0.290000	46.4	2000.0	9.000	On	N	19.8	14.1	60.5
0.522000	38.5	2000.0	9.000	On	N	19.9	17.5	56.0
1.046000	31.7	2000.0	9.000	On	N	19.7	24.3	56.0
1.458000	33.9	2000.0	9.000	On	L1	19.9	22.1	56.0
10.490000	34.6	2000.0	9.000	On	L1	19.9	25.4	60.0

Final Result 2

Frequency (MHz)	Average (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.174000	40.6	2000.0	9.000	On	L1	19.9	14.2	54.8
0.298000	24.6	2000.0	9.000	On	L1	19.9	25.7	50.3
0.518000	20.5	2000.0	9.000	On	L1	20.0	25.5	46.0
0.986000	22.7	2000.0	9.000	On	L1	19.9	23.3	46.0
1.514000	24.0	2000.0	9.000	On	L1	19.9	22.0	46.0
10.138000	24.2	2000.0	9.000	On	L1	19.9	25.8	50.0

Charging Mode, Set.2(Adapter2+Cable2+Rear Camera):

Fig A.18 shows the conducted emission plot from 150kHz to 30MHz for Set.2.

Final Result 1

Frequency (MHz)	QuasiPeak (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.162000	55.9	2000.0	9.000	On	L1	19.9	9.5	65.4
0.366000	39.6	2000.0	9.000	On	N	19.8	19.0	58.6
0.590000	40.0	2000.0	9.000	On	N	19.9	16.0	56.0
1.222000	39.2	2000.0	9.000	On	L1	19.9	16.8	56.0
1.334000	41.1	2000.0	9.000	On	L1	19.9	14.9	56.0
15.118000	38.1	2000.0	9.000	On	L1	20.0	21.9	60.0

Final Result 2

Frequency (MHz)	Average (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.162000	38.5	2000.0	9.000	On	L1	19.9	16.8	55.4
0.422000	20.8	2000.0	9.000	On	L1	20.0	26.6	47.4
0.534000	24.1	2000.0	9.000	On	L1	20.0	21.9	46.0
0.906000	26.9	2000.0	9.000	On	L1	19.9	19.1	46.0
1.502000	27.1	2000.0	9.000	On	L1	19.9	18.9	46.0
15.282000	28.1	2000.0	9.000	On	L1	20.0	21.9	50.0

Charging Mode, Set.3(Adapter1+Cable1+MP4 player from SD Card):

Fig A.19 shows the conducted emission plot from 150kHz to 30MHz for Set.3.

Final Result 1

Frequency (MHz)	QuasiPeak (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.162000	50.6	2000.0	9.000	On	N	19.8	14.8	65.4
0.426000	40.2	2000.0	9.000	On	L1	20.0	17.1	57.3
0.590000	40.0	2000.0	9.000	On	N	19.9	16.0	56.0
1.166000	39.9	2000.0	9.000	On	N	19.7	16.1	56.0
1.598000	40.8	2000.0	9.000	On	L1	19.8	15.2	56.0
12.790000	38.6	2000.0	9.000	On	L1	20.0	21.4	60.0

Final Result 2

Frequency (MHz)	Average (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.162000	34.2	2000.0	9.000	On	N	19.8	21.2	55.4
0.426000	22.5	2000.0	9.000	On	L1	20.0	24.8	47.3
0.590000	26.6	2000.0	9.000	On	N	19.9	19.4	46.0
0.906000	26.5	2000.0	9.000	On	N	19.7	19.5	46.0
1.282000	27.7	2000.0	9.000	On	L1	19.9	18.3	46.0
14.446000	27.7	2000.0	9.000	On	L1	20.0	22.3	50.0

USB Mode, Set.5(Copy data from EUT to PC):

Fig A.20 shows the conducted emission plot from 150kHz to 30MHz for Set.5.

Final Result 1

Frequency (MHz)	QuasiPeak (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.422000	40.8	2000.0	9.000	On	L1	20.0	16.7	57.4
0.466000	45.0	2000.0	9.000	On	L1	20.0	11.6	56.6
0.822000	35.4	2000.0	9.000	On	L1	19.9	20.6	56.0
1.370000	41.6	2000.0	9.000	On	L1	19.9	14.4	56.0
2.122000	39.2	2000.0	9.000	On	N	19.6	16.8	56.0
3.794000	34.9	2000.0	9.000	On	N	19.6	21.1	56.0

Final Result 2

Frequency (MHz)	Average (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.422000	33.9	2000.0	9.000	On	L1	20.0	13.5	47.4
0.462000	38.3	2000.0	9.000	On	L1	20.0	8.4	46.7
1.166000	32.4	2000.0	9.000	On	L1	19.9	13.6	46.0
1.370000	32.2	2000.0	9.000	On	L1	19.9	13.8	46.0
2.134000	26.8	2000.0	9.000	On	N	19.6	19.2	46.0
7.922000	38.7	2000.0	9.000	On	N	19.7	11.3	50.0

USB Mode, Set.6(Copy data from PC to EUT ):

Fig A.21 shows the conducted emission plot from 150kHz to 30MHz for Set.6.

Final Result 1

Frequency (MHz)	QuasiPeak (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.266000	42.6	2000.0	9.000	On	L1	19.9	18.7	61.2
0.474000	44.8	2000.0	9.000	On	L1	20.0	11.6	56.4
1.174000	41.6	2000.0	9.000	On	L1	19.9	14.4	56.0
1.366000	41.6	2000.0	9.000	On	L1	19.9	14.4	56.0
2.422000	35.5	2000.0	9.000	On	L1	19.8	20.5	56.0
3.754000	35.3	2000.0	9.000	On	N	19.6	20.7	56.0

Final Result 2

Frequency (MHz)	Average (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.426000	37.5	2000.0	9.000	On	L1	20.0	9.8	47.3
0.466000	42.4	2000.0	9.000	On	L1	20.0	4.2	46.6
1.178000	29.4	2000.0	9.000	On	N	19.7	16.6	46.0
1.366000	33.1	2000.0	9.000	On	L1	19.9	12.9	46.0
2.422000	26.3	2000.0	9.000	On	L1	19.8	19.7	46.0
7.922000	37.9	2000.0	9.000	On	N	19.7	12.1	50.0

USB Mode, Set.7(Copy data from SD Card to PC):

Fig A.22 shows the conducted emission plot from 150kHz to 30MHz for Set.7.

Final Result 1

Frequency (MHz)	QuasiPeak (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.254000	42.9	2000.0	9.000	On	N	19.8	18.7	61.6
0.422000	41.4	2000.0	9.000	On	L1	20.0	16.0	57.4
0.470000	45.0	2000.0	9.000	On	N	19.9	11.5	56.5
1.154000	39.8	2000.0	9.000	On	L1	19.9	16.2	56.0
1.742000	38.4	2000.0	9.000	On	N	19.6	17.6	56.0
2.242000	35.8	2000.0	9.000	On	N	19.6	20.2	56.0

Final Result 2

Frequency (MHz)	Average (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.254000	31.6	2000.0	9.000	On	N	19.8	20.0	51.6
0.422000	34.2	2000.0	9.000	On	L1	20.0	13.2	47.4
0.470000	39.7	2000.0	9.000	On	N	19.9	6.8	46.5
1.010000	31.1	2000.0	9.000	On	L1	19.9	14.9	46.0
1.506000	27.8	2000.0	9.000	On	L1	19.9	18.2	46.0
7.922000	38.1	2000.0	9.000	On	N	19.7	11.9	50.0

USB Mode, Set.8(Copy data from PC to SD Card):

Fig A.23 shows the conducted emission plot from 150kHz to 30MHz for Set.8.

Final Result 1

Frequency (MHz)	QuasiPeak (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.246000	39.7	2000.0	9.000	On	L1	19.9	22.2	61.9
0.426000	40.8	2000.0	9.000	On	L1	20.0	16.5	57.3
0.474000	44.9	2000.0	9.000	On	N	19.9	11.6	56.4
1.190000	38.1	2000.0	9.000	On	N	19.7	17.9	56.0
1.378000	41.4	2000.0	9.000	On	L1	19.9	14.6	56.0
2.998000	34.8	2000.0	9.000	On	N	19.6	21.2	56.0

Final Result 2

Frequency (MHz)	Average (dBuV)	Meas. Time (ms)	Bandwidth (kHz)	Filter	Line	Corr. (dB)	Margin (dB)	Limit (dBuV)
0.246000	28.3	2000.0	9.000	On	L1	19.9	23.6	51.9
0.430000	35.5	2000.0	9.000	On	N	19.9	11.8	47.3
0.474000	38.1	2000.0	9.000	On	N	19.9	8.4	46.4
1.190000	28.1	2000.0	9.000	On	N	19.7	17.9	46.0
1.378000	31.0	2000.0	9.000	On	L1	19.9	15.0	46.0
2.998000	26.8	2000.0	9.000	On	N	19.6	19.2	46.0

***END OF REPORT***

	FCC Part 15E Test Report for Xiaomi Mobile Phone 24116RACCG This report details the FCC Part 15E test results for the Xiaomi Mobile Phone, model 24116RACCG, conducted by CTTL-Telecommunication Technology Labs, CAICT. It covers various wireless performance tests including output power, spectral density, emission bandwidth, radiated unwanted emissions, and AC powerline conducted emissions.
	Xiaomi 24116RACCG Mobile Phone FM Test Report This FM test report details the performance of the Xiaomi 24116RACCG mobile phone, covering unwanted emissions, adjacent channel selectivity, blocking, and sensitivity tests conducted by CTTL-Telecommunication Technology Labs, CAICT.
	Xiaomi 24116RACCG GSM Test Report Comprehensive GSM test report for the Xiaomi 24116RACCG mobile phone, detailing performance and compliance for GSM850 and PCS1900 bands. Tested by CTTL-Telecommunication Technology Labs, CAICT, this report covers output power, emissions, stability, and more, confirming adherence to standards.
	Xiaomi 24116RACCG Mobile Phone FCC Part 15C Test Report FCC Part 15C test report for Xiaomi 24116RACCG mobile phone, detailing conducted and radiated emission tests, bandwidth, power spectral density, and band edge compliance by CTTL-Telecommunication Technology Labs.
	Xiaomi 24116RACCG Mobile Phone FCC Part 15C Test Report Official FCC Part 15C test report for the Xiaomi 24116RACCG mobile phone, detailing compliance testing performed by CTTL. Covers radio frequency parameters and regulatory adherence.
	FCC Part 15C Test Report for Xiaomi 24116RACCG Mobile Phone (BLE) This FCC Part 15C test report details the compliance testing for the Bluetooth Low Energy (BLE) capabilities of the Xiaomi 24116RACCG mobile phone, conducted by CTTL. It includes test results, measurement data, and equipment specifications.
	FCC Part 15 Test Report for Xiaomi 24116RACCG Mobile Phone This FCC Part 15 test report details the compliance testing for the Xiaomi 24116RACCG mobile phone, including Dynamic Frequency Selection (DFS) parameters, channel move time, non-occupancy period, and antenna requirements, performed by CTTL-Telecommunication Technology Labs.
	Xiaomi 24116RACCG Mobile Phone SAR Test Report - CTTL Official test report from CTTL detailing Specific Absorption Rate (SAR) testing for the Xiaomi 24116RACCG mobile phone, including hardware and software versions, and FCC ID.