Televisions, Audio, Appliances, Air Products - Hisense USA
Home
Text-to-Speech for Hisense TVs with a VIDAA OS - Hisense USA
User Guide for Hisense models including: 55A6GV, 4K HDR Smart TV, 55A6GV 4K HDR Smart TV, Smart TV, TV
2 Congratulations on the purchase of your Hisense TV! If you would like to know 'all things Hisense', contact us using the support info: The model and serial number of the TV is located on the back and/or on one side of
1 avr. 2022 — For detailed instructions and feature descriptions, ac- cess the full User Manual ... Program Your Universal Cable or Satellite Remote Control to Operate.
Product Support | (2021) 55" A6GV 4K Ultra HD VIDAA TV (55A6GV) - Hisense Canada
File Info : application/pdf, 23 Pages, 1.58MB
DocumentDocument4K HDR Smart TV Quick Setup Guide Help Hisense improve the environment by reducing paper waste. For detailed instructions and feature descriptions, access the full User Manual online or refer to the E-Manual in TV. Before using the TV, please read this guide carefully and keep it for future reference. ES-A21180Z-1 English Copyright statement © 2021 Hisense Company Ltd. All Rights Reserved. All material in this Quick Setup Guide is the property of Hisense Company Ltd. and its subsidiaries, and is protected under the laws of the US, Canada, Mexico and international copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of the Hisense Company Ltd. is a violation of the rights of Hisense Company Ltd. under the aforementioned laws. No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or otherwise, whether or not for a charge or for other or no consideration, without the prior written permission of Hisense Company Ltd. Requests for permission to store, reproduce, transmit or distribute materials may be made to one of the following addresses: USA: Hisense USA Corporation 7310 McGinnis Ferry Road Suwanee, GA 30024 CANADA: Hisense Canada Co., Ltd 2283 Argentia Road, Unit 16 Mississauga, ON, Canada L5N 5Z2 MEXICO IMPORTER: Hisense Mexico S. de R.L. de C.V. Blvd. Miguel de Cervantes Saavedra No 301 Torre Norte Piso 2, Col. Ampliación Granada Miguel Hidalgo, Ciudad de México, C.P. 11520 RFC: HME110512IY3 TEL: (52) (55) 5531-3515 Hisense, and any and all other Hisense product names, logos, slogans or marks are registered trademarks of Hisense Company Ltd. and its subsidiaries. All other trademarks are the property of their respective holders. Disclaimer Disclaimer: Subscriptions or other payments may be required to access content through some applications. Some or all of the included or downloaded application services in this Hisense device may not function depending on the Internet connection, local limitations of included applications or other reasons outside of Hisense's control. HISENSE EXPRESSLY DISCLAIMS RESPONSIBILITY FOR ANY APPLICATION SERVICE FROM FUNCTIONING AT ANY TIME, FOR CONTENT IN ANY APPLICATION SERVICE, FOR DISRUPTIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS, WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. By purchasing this device, you accept such Disclaimer without any claim on Hisense at any time. This Quick Setup Guide supports the following models: 43A6GV/50A6GV/55A6GV/65A6GV Table of Contents What's in the box ............................................................................................................3 Getting started ................................................................................................................4 Step 1. Attach stand or mount....................................................................................4 Step 2. Connect devices to your TV ..........................................................................7 Step 3. Get your remote ready.................................................................................11 Step 4. Power on the TV ..........................................................................................14 Step 5. Complete the first-time setup.......................................................................14 Step 6. Establish a network connection ...................................................................14 Step 7. Enjoy your TV! ............................................................................................16 Troubleshooting ...........................................................................................................17 Product Specifications ..................................................................................................18 Certification and Compliance........................................................................................20 1 Congratulations on the purchase of your Hisense TV! If you would like to know 'all things Hisense', contact us using the support info: The model and serial number of the TV is located on the back and/or on one side of the TV. We recommend that you record this if you ever need service. Country Customer Care Center Hisense Support Page Register your TV U.S.A CANADA · Phone: 1-888-9358880 · Hours of Operation: Monday - Friday: 9 AM to 9 PM EST Saturday - Sunday: 9 AM to 6 PM EST · Service Email: Service@hisenseusa.com http://www.hisense-usa. com/support/ · Phone: 1-855-3447367 · Hours of Operation: Monday - Friday: 8 AM to 8 PM EST · Service Email: canadasupport@ hisense.com http://www.hisensecanada.com/support/ http://www.hisense-usa. com/support/register http://www.hisensecanada.com/support/ productReg.asp MEXICO · Phone: 800-008-8880 · Hours of Operation: Monday - Friday: 9:0021:00 hrs https://hisense.com.mx/ support/ https://hisense.com.mx/ support/register Saturday: 9:00-15:00 hrs · Service Email: servicio@hisense. com.mx *Scan to download user manual Disclaimer: This Quick Setup Guide is intended as a general guideline to help you set up your TV. Images throughout this document are for illustrative purposes only and may differ from the actual product. 2 What's in the box Your Hisense TV comes with the following items: TV Quick Setup Guide (this document) 1 set of AAA(1.5Vcc) batteries 2 base stands remote control Important Safety Information and Warranty Card 1 RCA jack to AV cable (65")(165.1 cm) 4 screws (M4×16 for 43")(109.2 cm) 4 screws (M4×12 for 50"/55")(127.0 cm/139.7 cm) 4 screws (M5×12 for 65")(165.1 cm) power cord IMPORTANT: To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box. · Please check foam for accessories before discarding. · Veuillez vérifier la mousse pour qu'il n'y ait pas d'accessoires avant de la jeter. · Antes de desechar la espuma, asegúrese de retirar todos los accesorios. You will also need the following items (which are not included) to set up your TV: Wireless router (not included) for Internet connectivity Phillips screwdriver (not included) to secure the TV stand HDMI and other types of cables (not included) to connect external devices to the TV Wall mount bracket and screws (not included) if you prefer to mount the TV on the wall 3 Getting started Step 1. Attach stand or mount Before you start using your TV, attach your TV stand or mount it on the wall. CAUTION: · Disconnect the AC power cord before installing a stand or a wall mount bracket. · The LED display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure. · After the installation is complete, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any. Attach the TV stand To attach the TV stand legs to your TV: 1. Carefully place your TV face down on a clean, soft and flat surface. 2. Insert the TV base stands into the bottom slots on your TV. 3. Use the screws provided to secure each leg tightly. 43"/50"/55" (109.2 cm/127.0 cm/139.7 cm) Base Stand Screws: M4×16 (43")(109.2 cm) M4×12 (50"/55")(127.0 cm/139.7 cm) 4 65" (165.1 cm) A A Screws: Base Stand M5×12 B B Screws: Base Stand M5×12 Note: If your table is long enough to place the TV, then insert the base stands into the screw holes `A' that are shown in the illustration. If your table is not long enough, then insert the base stand into the screw holes `B' that are shown in the illustration. Note that these two installation methods types cannot be mixed. 5 Attach the wall mount bracket (not included) Before you begin the third-party manufacturer instructions, be sure to do the following things: 1. Place the TV face down on a clean, safe and cushioned surface. Screw 2. Remove the TV stand if you have already (not included) attached it. 3. Place spacers (not included) in the corresponding bracket holes. CAUTION: Spacer (not included) Bracket (not included) · Follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury. · When you attach the mount, be sure to use spacers (provided by the third-party manufacturer) between the TV and the bracket. · To prevent internal damage to the TV and to ensure it is mounted securely, be sure to use fixing screws (not included) that are 8.0 - 10.0 mm (43"/50"/55")(109.2 cm/127.0 cm/139.7 cm) or 9.5 - 11.5 mm (65")(165.1 cm) in length when measured from the attaching surface of the rear cover. · Make sure the tilt angle between the TV screen and the vertical surface is no more than 15 degrees. 15° 8.0 - 10.0 mm (43"/50"/55")(109.2 cm/127.0 cm/139.7 cm) 9.5 - 11.5 mm (65")(165.1 cm) TV screen Vertical surface Wall mount bracket Screw Rear cover of the TV Spacer Wall mount hole pattern(mm) Wall mount screw size 200 × 300 (43"/50"/55")(109.2 cm/127.0 cm/139.7 cm) 400 × 300 (65")(165.1 cm) M6 NOTE: · If you have additional questions, please contact the wall mount manufacturer or the retailer from which you purchased the TV. · The diameter and length of the screws differ depending on the wall mount bracket model. 6 Step 2. Connect devices to your TV Check to ensure that you have connected right cables for right ports securely. Loose connections can affect the quality of the picture image and color. 43"/50"/55" (109.2 cm/127.0 cm/139.7 cm) Back View Power Input 7 65" (165.1 cm) Back View Power Input 8 TV label Port Cable External Equipment Brief Description ANT/CABLE HDMI VIDEO AV IN L R AV IN DIGITAL AUDIO OUT Antenna VHF/UHF Antenna ANT OUT Connect an outdoor VHF/ UHF antenna. Connect a High Definition Multimedia Interface (HDMI) cable from an external device. VCR Yellow DVD Player/Recorder White Red Video Camera Set-top Box Satellite antenna cable Satellite Receiver Red(R) White(L) Yellow(Video) Connect a composite video cable and left-right audio cables from an external AV device. Audio Amplifier Speaker Connect an optical cable from an external digital audio system. 9 TV label Port Cable External Equipment Brief Description Connect headphones to hear audio from the TV. Headphones with microphones are not supported. USB LAN SERIAL Connect a USB device for browsing photos, music and movies. Hard disks with a total current consumption or impulse current consumption greater than 500mA are not supported. Connect an Ethernet cable to access a network or the Internet. The TV also has a wireless connectivity feature. It may be used to connect to a home automation system or Custom Integrated Audio/Video (A/V) system. It is recommended that it only be completed by a professional custom installer. RESET Power off / restart (quick press) Reset your TV back to the factory setting (long press for 5 seconds) 10 Step 3. Get your remote ready The following table shows the buttons on your remote control and describes what they are for. BUTTON DESCRIPTION Power on/off Special function buttons INPUT Change TV input source Number Enter Channels/input numbers LIVE TV Select Live TV channel CC Turn Closed Caption On/Off and turn Closed Caption on when mute MEDIA Quick access to Media / / / The button for the Menu D-pad (up/down/left/right navigation buttons) OK Confirmation button Return to the previous place in the menu or app Display the Home screen VOL VOL Volume (up/down) CH Channel (up/down) Mute and restore sound MTS Set the audio language (MTS) Media content control function buttons (Icons may vary depending on models.) App Music Enter Channels/input numbers and special function buttons Quick access to all applications Activate the microphone Quick access to Youtube Music 11 BUTTON DESCRIPTION Quick access buttons to all apps Select a digital sub-channel SPORTS Quick access to VIDAA SPORTS FREE Quick access to VIDAA FREE ART Quick access to VIDAA ART EXIT Exit the menu or app NOTE: Buttons listed here are for reference only. Actual remote control models may vary. Insert the batteries 1. Take off the back cover to open the battery compartment of the remote control. 2. Insert two AAA(1.5Vcc) size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends indicated in the battery compartment. 3. Restore the battery compartment cover. Important Information about the remote and batteries · Discard batteries in a designated disposal area. Do not throw them into a fire. · Remove old batteries immediately to prevent them from leaking into the battery compartment. · If you do not intend to use the remote control for a long time, then remove the batteries. · Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin then wash it immediately. · Do not mix old and new batteries. · Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries. · Do not continue using the remote if it gets warm or hot. · Call our Support Center immediately on the support website. Remote Control Range Information The remote control can work at a distance of up to 26 feet (792.5 cm) in front of the TV set. It can work at a 30 degree horizontal or vertical angle. 12 Program Your Universal Cable or Satellite Remote Control to Operate Your New Television (only for USA) If you would like to program your other household remote controls to your new television, please refer to the User Manual supplied by your Cable or Satellite provider. It should include instructions on how to program their remote to your television. A list of codes for the most common Cable and Satellite providers are listed below. Use the code that is associated with your Cable or Satellite provider (if applicable). DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002, 12183 Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463 Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 12002 Cox Communications......0178, 10178, 1326, 1463 Dish Network......505, 627, 538, 720, 659 If the code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider's customer service center. If your Cable or Satellite provider does not have a code available, please contact us at one of the phone numbers on Page 2. Using Your Cable Set-top Box or Satellite Receiver Remote as a `Universal' Remote If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a `Universal' Remote, then visit the Support page to view a list of the codes. Pairing the remote control 1. Pair the remote to the TV after you power it on. Keep the remote control within 10 feet (304.8 cm) from the TV. Press and hold the [ ] button at least 3 seconds to start pairing. 2. If the remote pairs successfully, a confirmation will display on the screen. If it does not pair successfully, an unsuccessful message will display. Repeat step 1. NOTE: · If an unknown error occurs with the remote, it could have been caused by interference. Try to remove what's causing the interference and pair the remote again. · If an unknown error occurs with the remote control while the battery power is normal, you can take out the batteries and press any key for 1~2 seconds, and the remote control can work normally. · The remote cannot be paired to the TV while the TV is in the standby mode. · This function may not be supported for some countries/regions/models. 13 Step 4. Power on the TV Connect your power cord to the TV and plug it into a power outlet. Your TV will display a launch screen showing the Hisense logo. Power Cord Wall Outlet Step 5. Complete the first-time setup The first time you turn on your TV, there is a guided setup to make it easy to connect your TV to the Internet and complete the setup of your TV. Step 6. Establish a network connection 1. Press the Home button on the remote control, and select the the Settings menu. 2. Select Network > Network Configuration. icon to enter into Establish a wired network connection External Modem (ADSL / VDSL / Cable TV) IP Sharer (Router) (with DHCP server) TV JACK LAN Modem Cable LAN Cable LAN Cable 14 Automatically obtain an IP address 1. If you connect to the wired network, the TV will automatically obtain an IP address and connect to the network. NOTE: The default option of IP Settings Mode is DHCP. 2. If the connection fails, disconnected message will display for the Ethernet status. Retry or enter the IP Settings, and select Manual to input the information again. Manually enter the IP address 1. Enter the IP Settings to select Manual. 2. Enter the IP Address, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the menu. Establish a wireless network connection The TV can directly receive network signals via wireless router. Before you establish a wireless network connection, turn on your Wi-Fi. Wireless router with DHCP Wireless LAN Adapter built-in TV set LAN Cable The TV can directly receive network signals via wireless router. 1. Choose Wireless among Connection Select modes, and the list of networks will display on screen automatically. 2. Select a wireless network from the list, and enter password. 3. If you couldn't find your network, select Refresh to get the lastest list. Alternatively, you can select Add to input a Wi-Fi name, select the type of security mode, and enter password. Close the network connection Unplug the network cable or turn off your Wi-Fi. The network connection will close. 15 Step 7. Enjoy your TV! Now that you've completed the first-time setup, your Home screen is your starting point for using your TV. Your Hisense TV provides a variety of entertainment options, so you'll always find something new. Use your TV to watch live channels, access video on demand to watch movies, and much more. Press the Home button on your remote to get started. Text-to-Speech(TTS) and Video Description functionalities on TV Text-to-Speech (TTS) and Video Description can help you to navigate the menus on the screen and hear an audio description of relevant programs. Text-to-Speech can convert written text into voice text to help visually impaired people listen to the information they are unable to read. In addition, the Video Description has an audio narration added to certain programs that will describe the main visual elements which visually impaired users may not be able to see. Follow the steps below to enable the functions: 1. Press the menu button on your remote to access the Menu. 2. Next, select Settings to enter the Settings Menu. 3. Select Accessibility > Narration or Voice Guide to turn the Narration or Voice Guide `On' or `Off'. When Voice Guide is turned On, then the contents of each menu displayed can be broadcasted out. When Narration is turned On, then you can hear the introduction of relevant programs. https://www.hisense-usa.com/ttsforhisensetvswithvidaa/ 16 Troubleshooting If you are having trouble with your TV, first try turning it off and on again. If this does not fix the problem, check the tips in the following table. If your problem is not listed in the following table, then contact us at one of the phone numbers on Page 2. Issues No sound or picture I have connected an external source to my TV and I get no picture and/or sound. When I turn on my TV, there is a delay for a few seconds before the picture appears. Is this normal? The picture is normal but there is no sound Sound but no picture or black and white picture The sound and/or picture is distorted or appears wavy The sound and picture is blurry or cuts out A horizontal or vertical stripe appears on the picture and/or the picture is shaking The plastic cabinet makes a "clicking" type of sound The remote control does not work Possible solutions · Check if the power cord is plugged into a powered AC outlet. · Press the Power button on the remote control to activate the unit from 'Standby' mode. · Check to see if the LED light is on or not. If it is, then the TV is receiving power. · Check for the correct output connection on the external source and for the correct input connection on the TV. · Make sure you have made the correct selection for the input mode for the incoming signal. · Yes, this is normal. The TV is initializing and searching for previous setting information. · Check the volume settings. · Check if 'Mute' mode is set to On. · If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds. · Check that the Color is set to 50 or higher. · Try different TV channels. · An electric appliance may be affecting the TV. Turn off any appliances that are nearby and move it farther away from the TV. · Insert the power plug of the TV set into another power outlet. · If using an external antenna, check the direction, position and connection of the antenna. · Adjust the direction of your antenna or reset or fine tune the channel. · Check if there is an appliance or electric tool nearby that is causing interference. · The 'click' sound can occur when the temperature of the television changes. This change causes the television cabinet to expand or contract, which makes the sound. This is normal and the TV is OK. · Confirm that TV still has power and is operational. · Change the batteries in the remote control. · Check if the batteries are correctly installed. 17 Product Specifications Model Name 43A6GV 50A6GV Dimension Without Stand 37.9 × 22.0 × 2.9 inches (W × H × D) (963 × 560 × 74 mm) 44.0 × 25.4 × 2.9 inches (1 117 × 646 × 74 mm) With Stand 37.9 × 24.2 × 7.7 inches (963 × 614 × 196 mm) 44.0 × 27.9 × 8.9 inches (1 117 × 709 × 225 mm) Weight Without Stand 15.0 lbs (6.8 kg) 21.6 lbs (9.8 kg) With Stand 15.2 lbs (6.9 kg) 22.0 lbs (10.0 kg) TV Stand Width (W × D) 32.9 × 7.7 inches (835 × 196 mm) 38.0 × 8.9 inches (964 × 225 mm) Class 43" (109.2 cm) 50" (127.0 cm) Active Screen Size (Diagonal) 42.5 inches (107.9 cm) 49.5 inches (125.7 cm) Screen Resolution 3840 × 2160 Audio Power 7 W + 7 W 8 W + 8 W Power consumption 100 W 120 W Power Supply 120 V ~ 60 Hz Connectivity Built-in Wireless feature (2x2 dual band) Ports 3 HDMI ports, 2 USB ports, 1 LAN port for Ethernet, 1 Digital Audio Output, 1 RF Input, 1 Headphone Audio Output, 1 RCA Composite Video Input , 1 left/right Audio Input for Composite Receiving Channels VHF: 2 - 13, UHF: 14 - 69, CATV: 1 - 125 Digital Terrestrial Broadcast (8VSB): 2 - 69 Digital cable (64/256 QAM): 1 - 135 Tuner Type Frequency synthesized Receiving System Analog: NTSC Digital: ATSC/QAM Operating Temperature 41°F - 95°F(5°C - 35°C) Operating Humidity 20% to 80% non-condensing Storage Temperature 5°F to 113°F(-15°C to 45°C) Storage Humidity 10% to 70%, non-condensing Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or otherwise. 18 Product Specifications Model Name 55A6GV 65A6GV Dimension Without Stand 48.5 × 28.0 × 2.9 inches (W × H × D) (1 233 × 711 × 74 mm) 57.2 × 32.8 × 2.9 inches (1 452 × 834 × 74 mm) With Stand 48.5 × 30.4 × 8.9 inches (1 233 × 773 × 226 mm) 57.2 × 35.3 × 11.5 inches (1 452 × 896 × 291 mm) Weight Without Stand 24.9 lbs (11.3 kg) 36.4 lbs (16.5 kg) With Stand 25.4 lbs (11.5 kg) 36.8 lbs (16.7 kg) TV Stand Width (W × D) 39.8 × 8.9 inches (1 012 × 226 mm) 25.3 × 11.5/50.3 × 11.5 inches (642 × 291/1 277 × 291 mm) Class 55" (139.7 cm) 65" (165.1 cm) Active Screen Size (Diagonal) 54.6 inches (138.7 cm) 64.5 inches (163.8 cm) Screen Resolution 3840 × 2160 Audio Power 8 W + 8 W 10 W + 10 W Power consumption 130 W 160 W Power Supply 120 V ~ 60 Hz Connectivity Built-in Wireless feature (2x2 dual band) Ports 1 RCA Composite Video Input , 1 left/right Audio Input for 1 AV IN port Composite 3 HDMI ports, 2 USB ports, 1 LAN port for Ethernet, 1 Digital Audio Output, 1 RF Input, 1 Headphone Audio Output Receiving Channels VHF: 2 - 13, UHF: 14 - 69, CATV: 1 - 125 Digital Terrestrial Broadcast (8VSB): 2 - 69 Digital cable (64/256 QAM): 1 - 135 Tuner Type Frequency synthesized Receiving System Analog: NTSC Digital: ATSC/QAM Operating Temperature 41°F - 95°F(5°C - 35°C) Operating Humidity 20% to 80% non-condensing Storage Temperature 5°F to 113°F(-15°C to 45°C) Storage Humidity 10% to 70%, non-condensing Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or otherwise. 19 Certification and Compliance FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. The Wi-Fi Module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Declaration of Conformity Trade Name: Hisense Model: 43A6GV/50A6GV/55A6GV/65A6GV Responsible Party: Hisense USA Corporation Address: 7310 McGinnis Ferry Road, Suwanee, GA 30024 Telephone Number: 678-318-9060 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 20 Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 19922020 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, DTS-HD Master Audio, DTS-HD, Virtual:X, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Environmental Protection This mark indicates that this product should not be disposed together with other domestic garbage, to avoid damage to the environment or human health due to the disposal of uncontrolled waste. Recycle it responsibly for promoting the sustainable reuse of material resources. To return your used device, please use the return systems available in your location or contact the vendor where you purchased your product they could take this product for recycling and protection of the environment. ©2021. All rights reserved. Hisense and the Hisense logo are registered trademarks of Hisense. Other brand and product names are registered trademarks of their respective owners. 21