FNKvision Smart Camera FNK-D27/S User Manual

Quick Start Guide

Before using this product, please read this manual carefully and keep it for future reference.

1. Download the App

You can either scan the QR code or search "Yoosee" in the App Store or Google Play.

[QR code for iOS App Store] [QR code for Android Google Play]

2. Power on the device

Power on the device and it will give out a "Du du" sound in around 30 seconds. If the "Du du" sound cannot be heard, please voice tone "Reset to default setting" is heard.

Note: Insert the thimble into the "reset" hole and long press it until the voice tone "Reset to default setting" is heard.

3. Add the device

Follow these steps to add your camera:

1. Connect your phone to WiFi. Ensure it is 2.4GHz if the device does not support 5GHz WiFi.
2. In the Yoosee app, go to 'Device', click '+', and follow the prompts to add the camera.

Device Adding Methods:

Default method is Bluetooth adding. Choose one from distribution methods B or C.

• a. Click "+"
• b. Automatically search for Bluetooth addition
• c. Add via hotspot: Scan the body QR code or select the WiFi camera.
• d. Confirm steps 1 & 2 are done and check operations.
• e. Select WiFi or network cable to add according to the equipment type.
• f. Enter the WiFi name and password.
• g. Connect the phone to the camera hotspot (WiFi name starting with "GW_").
• h. The device automatically enters the connection state.
• i. Complete the connection and name the device.

Visual Description of Steps a-i: The steps are illustrated with small screenshots showing the app interface for adding a device, connecting to WiFi, and confirming settings.

Device Sharing

Invite your friends to download and install the Yoosee App and register to log in.

1. Click the sharing button to set up visitor permissions.
2. Share the device by inputting your friend's Yoosee account, or choose "Face-to-face sharing" or "Sharing on social media".

Troubleshooting

Q: The camera cannot connect with WiFi?

A:

• Double-check the WiFi password.
• Ensure the WiFi is 2.4 GHz. If using a dual-band router, select the 2.4 GHz band.
• Check router settings for restrictions like AP isolation.
• Some phones require mobile phone GPS permission and GPS to be turned on to display the WiFi list.

Q: Device is offline in the device list?

A:

• Check the device's network connection.
• If a TF card is inserted, unplug it, reset the device and router, then check if the device is online.
• If the problem persists, reset the device (long press the reset button for 5-10 seconds) and re-add it.
• Upgrade the device firmware and App version to the latest.

Q: How to do if the device is offline after changing a router or WiFi password?

A: The device retains the original password. If the password changes, reset the device (long press the reset button for 5-10 seconds) and re-add it according to the App prompts.

Q: The playback video cannot be watched?

A:

• Unplug and re-insert the TF card.
• Check if the record mode is enabled.
• If record mode is enabled but no video is saved, go to "Settings" > "Record settings", disable "Record switch", and format the TF card.
• If video still cannot be watched after formatting, try a new TF card.

For more questions, refer to "Help and feedback" in the Yoosee App.

Notes

• For 2.4G & 5G WiFi, select the network corresponding to the equipment type.
• The device supports up to 128GB TF cards, which should be formatted with FAT32.
• The device uses loop recording; when the TF card is full, it automatically overwrites the earliest files.
• Do not install the product in harsh environments (high temperatures, humidity, dust, smoke).
• The Yoosee App and device firmware are updated periodically. Update when prompted.
• The device is automatically bound to the Yoosee account upon connecting to the network. Unbind from the previous account before binding a new one.
• Yoosee CMS is available for Windows PC for camera surveillance. Download from http://www.yoosee.co.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.