Operation Video Guide
Use the scan function to view the corresponding function usage.
Scan the QR code below to view the operation video guide: [QR code for operation video]
(Visual description: The page displays a QR code labeled 'Operation video guide'.)
Downloading the Yoosee APP
Follow these options to download the mobile application:
- Search for "Yoosee" in your mobile app store.
- Scan the QR code below to download the "Yoosee" mobile APP.
(Visual description: The page displays two QR codes, one labeled 'Download on the App Store' and the other 'Get it on Google Play', both associated with downloading the 'Yoosee' app.)
Account Registration
New users need to register their account via mobile phone number or email.
Steps:
- Click "Register".
- Select "Registration Location".
- Enter "Mobile Number/Email".
- Click "Next" and follow the APP prompts to complete the account registration.
- Log in to your account.
Precautions for Registration:
- In some countries and regions, mobile phone number registration may not be supported. Please register using your email address.
- Data services may not be compatible across different registered countries and regions. Please select the correct region for registration.
(Visual description: The page shows a mobile app interface illustrating the registration process, including fields for country code, email/phone number, and password, with 'Login' and 'Register' buttons.)
Switching on Device
Before connecting, power up the device and wait approximately 30 seconds. The camera will emit a prompt: "Please scan the QR code to add the device" and a continuous "du du" sound.
If you do not hear the prompt, press and hold the RESET button until the camera beeps "di" and then wait for the device to reboot.
(Visual description: The page shows an illustration of a power adapter connecting to the camera, and a separate diagram highlighting the 'Camera Reset button'.)
Adding the Camera
Follow these steps within the Yoosee APP:
- Click the "+" icon in the upper right corner of the "Yoosee" APP.
- Navigate to "Prepare Camera".
- Scan the QR code on the camera.
- Follow the APP prompts to complete adding the camera.
(Visual description: The page displays a mobile app interface showing the 'Add new device' screen with a '+' icon and a subsequent screen illustrating scanning a QR code.)
Precautions for Adding Camera
SIM Card:
- Confirm whether the camera has a built-in SIM card. If not, please insert the external SIM card provided in the package.
- Please refer to the actual device for the location of the QR code on the camera.
4G Data Service:
- When the 4G data service of your device expires, you will not be able to receive alarm messages, watch live broadcasts, or access playback functions. Please renew the 4G data service in time.
FAQs (Frequently Asked Questions)
Q: What should I do if the device shows offline in the APP device list?
A:
- Check if the power supply connected to the device is normal.
- If there is an SD card on the device, remove it, then reboot the device and router to see if it can go online.
- Check the 4G card traffic. If the traffic is insufficient, please top up in the app.
Q: What should I do if I can't watch the video on card playback?
A: Ensure the video switch is turned on normally. If the switch is on but still no video, navigate to [Settings] > [Video Settings] > Formatting.
Q: What should I do if an abnormal alert occurs in the camera?
A:
- "Network connection failure" prompt: This indicates a poor network connection. Check if the antenna is connected properly and compare the signal with your mobile phone signal.
- "Initialization failure" prompt: If there is an SD card, please remove it first and try again. If multiple attempts still result in "initialization failure", please contact the merchant for assistance.
Cautions
- Please disconnect the power supply before inserting or removing the card; otherwise, the card may be damaged.
- The camera supports up to 256GB SD cards with FAT32/exFAT format.
- The device uses loop recording technology. When the SD card is full, the camera will automatically overwrite the earliest video.
- Do not install the product in environments with high temperature, high humidity, excessive dust, smoke, or other harsh conditions, as this may cause equipment damage.
- Yoosee App and device firmware are updated periodically. If prompted to upgrade, please upgrade online.
- To watch the device monitoring on a Windows computer, download and install the Yoosee PC software from www.yoosee.co.
For more tutorials and support, use the "Help and Feedback" section within the app.
Technical Support: support@gwell.cc
(Visual description: The page includes a QR code labeled 'More exciting events and tutorials'.)
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.
