LG QNED80 Series LED TV

Unboxing and Initial Setup

Step 1: Unboxing

Carefully open the box. Remove the TV and accessories. It is recommended to use the original packaging for moving or storage.

Step 2: Stand Attachment

The following diagrams illustrate how to attach the stand to your TV. Ensure you use the correct screws and parts as indicated for your specific model (50QNED80*, 55QNED80*, 65QNED80*).

Diagram Description: The diagrams show the TV screen facing down on a protected surface, with the stand components being attached using screws (e.g., M4 x L16).

Step 3: Positioning the TV

Place the TV on a stable, level surface. Ensure adequate ventilation space around the TV, typically at least 10 cm (4 inches) from walls.

Mounting on a Table

1. Lift and tilt the TV into its upright position on a table.
2. Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.
3. Connect the power cord to a wall outlet.

Mounting to the Wall

An optional wall mount can be used. Consult your local dealer for a VESA-standard compatible mount. Ensure the wall is sturdy and suitable for mounting. Follow the specific instructions provided with the wall mount. For safety, it is recommended to use an LG brand wall mount. If mounting, remove the stand first.

Diagram Description: Diagrams show attaching wall brackets to the TV and then to the wall, with emphasis on secure connections and proper cable management.

Antenna/Cable Connection

Connect an antenna, cable, or cable box to watch TV. An RF cable may be optional depending on your setup.

Diagram Description: A diagram shows a coaxial cable connecting to the TV's antenna input.

Important Notes:

• Do not bend the RF cable's copper wire.
• Complete all device connections before connecting the power cord to prevent damage.
• A signal splitter can be used for multiple TVs.
• This TV supports DTV Audio Codec: MPEG, Dolby Digital.
• Ultra HD (3840 x 2160 pixels) broadcasts may not be directly receivable depending on country standards.

General Precautions

• Do not use this apparatus near water. Clean only with a dry cloth.
• Do not block ventilation openings. Install according to manufacturer's instructions.
• Do not install near heat sources like radiators or stoves.
• Do not defeat the safety purpose of polarized or grounding plugs. Consult an electrician if your outlet is incompatible.
• Protect the power cord from being walked on or pinched.
• Only use manufacturer-specified attachments and accessories.
• When using a cart, exercise caution to avoid tip-overs.
• Unplug during lightning storms or long periods of non-use.
• Refer all servicing to qualified personnel.

Environmental Considerations

• Keep away from direct sunlight, high humidity, and heat sources.
• Do not expose to dripping or splashing. Do not place liquid-filled objects on or over the apparatus.
• Avoid flammable objects and direct air conditioning.
• Do not install in excessively dusty places.
• Ensure proper ventilation; do not install in confined spaces or on carpets/cushions.
• Do not block or cover ventilation openings.
• Ventilation openings may become hot during extended use.

Power Cord Safety

• Protect the power cord from physical abuse.
• Do not move the TV while the power cord is plugged in.
• Do not use a damaged or loose-fitting power cord.
• Grasp the plug, not the cord, when unplugging.
• Do not overload AC outlets.
• The power plug is the disconnecting device; ensure it is accessible.

Child Safety

• Do not let children climb or cling onto the TV.
• Ensure furniture is stable and appropriate for the TV's weight.
• Route cords and cables to prevent tripping hazards.
• Never place the TV on unstable furniture or allow it to overhang.
• Anchor furniture and TV to a suitable support, especially tall units like bookcases.
• Keep tempting items (toys, remotes) away from the TV's edge.

Moving and Handling

• Use original packaging for moving.
• Disconnect all cables before moving.
• Carry with the screen facing away from you.
• Use at least two people for large TVs.
• Avoid jolts and excessive vibration.
• Keep the TV upright; do not tilt it sideways.
• Be careful not to damage protruding buttons.
• Avoid touching the screen directly.
• Do not place the TV screen-down without padding.
• When attaching the stand, place the screen face down on a cushioned surface.

Cleaning

• Unplug the power cord before cleaning.
• Wipe gently with a soft, dry cloth.
• Do not spray water or liquids directly on the TV.
• Do not use harsh chemicals, glass cleaners, air fresheners, insecticides, thinners, or alcohol, as they can damage the product.

Batteries

• Store batteries out of reach of children.
• Do not short circuit, disassemble, or overheat batteries.
• Do not dispose of batteries in fire.
• Caution: Risk of fire or explosion if batteries are replaced with an incorrect type.

Warnings

• Risk of Electric Shock: Do not open the cover. Refer servicing to qualified personnel.
• Fire Hazard: Keep open flames away from the product.
• Stability Hazard: Improper placement can cause serious injury or death.

HDMI

Connect HDMI cables with the TV and external devices turned off and unplugged.

Supported HDMI Audio Formats (Model Dependent): True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32/44.1/48 kHz), PCM (32/44.1/48/96/192 kHz).

Note: For clearer picture quality, ensure your connected device also supports HDMI Deep Color. If not, you may need to disable this setting on the TV.

Path to setting: [General] ➡️ [Devices] ➡️ [HDMI Settings] ➡️ [HDMI Deep Color]

Use certified HDMI cables with the HDMI logo. Using uncertified cables may result in display issues or connection errors.

Recommended HDMI Cable Types: Ultra High Speed HDMI®/TM cable (3 m / 9.84 ft or less).

USB

Some USB hubs may not be compatible. If a USB device is not detected, connect it directly to the TV's USB port.

Note: For optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick, a width of 18 mm (0.7 inches), and a wire diameter of 8 mm (0.31 inches).

Use a USB 2.0 extension cable if the TV's USB port is not accessible.

IR Blaster

Control set-top boxes, Blu-ray/DVD players, soundbars, and game consoles using the IR Blaster (model and country dependent).

Note: Connect the IR Blaster cable to the TV's IR Blaster port. Use universal control settings. Secure the IR Blaster with the provided 3M tape.

External Devices

Supported devices include Blu-ray players, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, and gaming devices.

Note: External device connections may vary from illustrations. In PC mode, resolution or refresh rate adjustments may be needed to clear picture noise. For wired LAN, use a CAT-7 cable for high-speed internet.

Starting TV

You can operate TV functions using the button on the TV.

Power On: Press the button.

Power Off: Press and hold the button.

Menu Control: Press the button.

Menu Selection: Press and hold the button.

Note: Initial TV setup may take up to one minute. On-Screen Display (OSD) may differ slightly from manual illustrations.

Remote RS-232C Setup

For RS-232C external control setup information, visit www.lg.com.

Caution: Do not drop or let the product fall when connecting external devices. Ensure connecting cables are long enough to prevent strain.

Broadcasting Specifications

Note: Certain 8K input/decoding standards may require an additional device. Upscaled 8K images depend on the source content.

Environment Condition

Product Information (Wireless Modules)

Specifications for wireless modules vary by model.

• Wireless LAN (IEEE 802.11a/b/g/n/ac/ax)
• Bluetooth

Note: Band channels vary by country. The user cannot change operating frequency. The device must be installed and operated with a minimum distance of 20 cm (7.8 inches) from the body.

FCC ID / IC: Varies by model (e.g., BEJLGSBWAX12 / 2703H-LGSBWAX12).

Open Source Software Notice

To obtain source code under open source licenses (GPL, LGPL, MPL), visit https://opensource.lge.com. LG Electronics can also provide source code on CD-ROM for a fee upon request to opensource@lge.com.

Cannot control the TV with the remote control.

• Check for obstructions (tape, objects) over the remote sensor.
• Replace batteries with new ones.

No image display and no sound is produced.

• Check if the TV is turned on.
• Ensure the power cord is securely connected to a working wall outlet.
• Test the outlet with another device.

The TV turns off suddenly.

• Check power control settings.
• Verify if the auto-off function is activated in the settings menu.
• If there is no signal, the TV may turn off automatically after 15 minutes of inactivity.

Abnormal Display

A slight flicker when the TV is cold is normal. Minor dot defects (red, green, blue spots) are typical and do not affect performance. Avoid touching the LCD screen for extended periods, as this may cause temporary distortion. Deactivated pixels are normal and do not affect TV reliability. Displaying a still image for too long may cause image sticking.

Generated Sound

Cracking Noise: This is caused by plastic thermal contraction due to temperature/humidity changes and is common.

Electrical Circuit Humming/Panel Buzzing: A low-level noise from the high-speed switching circuit is normal and does not affect performance.

FCC NOTICE (USA)

This equipment complies with FCC Part 15 rules for Class B digital devices. It is designed to provide reasonable protection against harmful interference in residential installations. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement (USA)

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. The transmitter must not be co-located or operated with any other antenna or transmitter. Install and operate with a minimum distance of 20 cm (7.8 inches) between the antenna and your body.

Industry Canada Statement (Canada)

This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) it may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.

IC Radiation Exposure Statement (Canada)

This equipment complies with IC radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20 cm (7.8 inches) between the antenna and your body.

RSS-247 Requirement (Canada)

For products with 5 GHz wireless function: Operation in the 5150-5250 MHz band is for indoor use only to reduce interference. Maximum antenna gain limits apply for compliance with e.i.r.p. limits. Users should be aware that high-power radars use these bands and may cause interference or damage.

WARNING! (STABILITY HAZARD)

A television set may fall, causing serious personal injury or death. Take simple precautions:

• Always use manufacturer-recommended stands or mounting methods.
• Always use furniture that can safely support the TV.
• Ensure the TV is not overhanging the edge of furniture.
• Educate children about the dangers of climbing furniture.
• Route cords and cables to prevent tripping.
• Never place the TV in an unstable location.
• Anchor tall furniture and the TV to a suitable support.
• Never place the TV on cloth or other materials between it and furniture.
• Keep tempting items (toys, remotes) away from the TV's reach.

Symbols

LG Take-back & Recycling Policy (USA)

LG Electronics offers e-waste take-back and recycling services. LG evaluates product recyclability at the design stage to contribute to conserving natural resources and protecting the environment. Visit https://www.lg.com/recycling for more information.

Tune In To Safety

• Never allow children to climb on or play on the TV or furniture.
• Never place the TV on furniture easily used as steps.
• Always follow manufacturer's installation and usage instructions.
• Always install the TV where it cannot be pushed, pulled over, or knocked down.
• Always route cords and cables to prevent tripping hazards.

Wall or Ceiling Mount Your Television

• Consult a retailer about professional installation if unsure.
• Use a manufacturer-recommended mount with safety certification.
• Follow all instructions from TV and mount manufacturers.
• Ensure the wall or ceiling is appropriate for mounting.
• A minimum of two people is required for wall/ceiling mounting.

Moving an Older Television

Exercise special care when placing older CRT/flat-panel TVs. Ensure furniture is sturdy and appropriate for the TV's size and weight. Do not let the TV overhang the furniture edge.

Remote Buttons

• Power (?): Turns the TV on or off.
• (Guide): Accesses the TV guide.
• (Dash): Inserts a hyphen (-) between numbers (e.g., 2-1).
• LIST: Accesses the saved channel list.
• QUICK ACCESS: Accesses [Edit Quick Access] to set up shortcuts for apps or Live TV.
• Volume Buttons (?⬆️/⬇️): Adjusts the volume level.
• Home (?): Accesses the Home menu or launches the last used apps.
• Wheel (OK): Selects menu items. Can also be used to change channels.
• Magic Explorer: Activate by changing pointer color to purple. Press and hold pointer on video to access features.
• Navigation Buttons (Up/Down/Left/Right): Scroll through menus. Pressing these buttons may disable the pointer; shake the remote to re-enable it.
• Back (↩️): Returns to the previous level or clears on-screen displays.
• Microphone: For voice commands.
• Number Buttons: Enter numbers.
• More actions: Displays additional remote functions.
• AD/SAP: Accesses Secondary Audio Program feature.
• Channel Buttons: Scrolls through saved channels.
• Mute (?): Mutes all sounds.
• Accessibility Menu: Accesses the [Accessibility] menu.
• Voice Recognition: Requires network connection. Speak while holding the button.
• Input: Changes the input source.
• Q. Settings: Accesses Quick Settings or [All Settings] menu.
• Special Function Buttons: Red button for recording, Streaming Service buttons for direct access.

Note: Some buttons may require pressing and holding for more than 1 second.

Registering the Magic Remote Control

Pair the remote by pointing it at the TV and pressing the Wheel (OK) button. If pairing fails, turn the TV off and on again.

Deregistering the Magic Remote Control

Press and hold the (Back) and (Home) buttons simultaneously for five seconds.

Note: Ensure your Access Point (AP) is at least 0.2 m (0.65 ft) away from the TV to avoid frequency interference.

Using Always Ready

Operate the TV and connect via Bluetooth with direct voice recognition while the TV is off. Enable the function via [General] ➡️ [Always Ready]. Pressing the button switches to Always Ready mode.

Note: Always Ready may increase energy consumption.

Connecting Smart Devices using NFC Tagging

Bring a smart device near the NFC icon (NFC) on the remote control to install the LG ThinQ app and connect to the TV. This feature is available for NFC-enabled smart devices only.

Specifications (MR22GN, MR22GA)

* Only MR22GN

What is Covered

Parts and Labor (internal/functional parts only).

Replacement products/parts are warranted for the remaining portion of the original warranty period or 90 days, whichever is greater. Replacements may be new, reconditioned, or refurbished.

Exclusions: This warranty does not cover service trips for installation, setup, repair of external equipment, improper adjustment, damage from transportation/handling (unless reported within 1 week), non-household use, incorrect electrical current, improper installation/operation, acts of nature (accidents, lightning, fire, flood), misuse, abuse, unauthorized modifications, or consumable parts like batteries.

Implied Warranties: Any implied warranty of merchantability or fitness for a particular purpose is limited to the duration of this limited warranty.

Limitation of Liability: LG is not liable for indirect, incidental, consequential, special, or punitive damages. LG's total liability shall not exceed the purchase price paid for the product.

Pixel Functionality: A small number of non-functioning pixels is normal and does not affect operation.

How Service is Handled

A sales receipt is required for warranty service. Obtain a return authorization before returning any product. Use original packaging for returns.

To Obtain Warranty Service: Call 1-800-243-0000 or visit www.lg.com.

Ways to Register

• Register Easily with Your Phone: Take a photo of the camera icon and text it to 77228. Visit Photoregister.com/help for assistance.
• Register Online: Visit https://www.lg.com/us/support/product-registration.
• Register by Mail: Complete and mail the provided card within 10 days.

Required Information: First Name, Last Name, Address, Email, Phone Number, Date of Purchase, Model Number, Serial Number, Name of Purchase Location.

You may opt-in to receive product news and offers from LG Electronics U.S.A., Inc.