GV2 Liguria Instruction Manual

Watch Overview

The GV2 Liguria is an automatic diver watch with a water resistance of 200 meters (660 feet).

The watch features a crown with three positions:

• Position A: Winding the mainspring.
• Position B: Setting the date.
• Position C: Setting the time.

Winding the Watch

To wind the watch, turn the crown clockwise in position A. Approximately 30-40 turns are needed to fully wind the watch. You will know it is fully wound when the second hand starts moving.

Setting the Date

1. Pull the crown out to position B.
2. Turn the crown counter-clockwise to set the date. Note: If the date is set between 9:00 PM and 1:00 AM, the date may not change correctly on the following day.
3. Once the date is set, push the crown back to its normal position (Position A).

Setting the Time

1. Pull the crown out to position C.
2. Turn the crown to set the hour and minute hands to the correct time.
3. Push the crown back to its normal position (Position A).

For more information, please visit www.gevril.com.