Gevril GV2 Giromondo Instruction Manual

Product Overview

This manual provides instructions on how to operate and maintain your Gevril GV2 Giromondo watch. The watch features a GMT 24-hour hand for tracking a second time zone.

The watch is Swiss Made and features a sophisticated design.

For more information, visit www.gevril.com.

Setting the Time

For Screw Crown:

1. Unscrew and pull out the crown to the 2nd position.
2. Rotate the crown to set the hour and minute hands.
3. Push the crown back in and screw it back to the normal position.

For Push Crown:

1. Pull out the crown to the 2nd position.
2. Rotate the crown to set the hour and minute hands.
3. Push the crown back in to the normal position.

Setting the GMT 24-Hour Hand

For Screw Crown:

1. Unscrew and pull out the crown to the 1st position.
2. Rotate the crown counter-clockwise (downward) to set the GMT 24-hour hand.
3. Push the crown back in and screw it back to the normal position.

For Push Crown:

1. Pull out the crown to the 1st position.
2. Rotate the crown counter-clockwise (downward) to set the GMT 24-hour hand.
3. Push the crown back in to the normal position.

Setting the Date

For Screw Crown:

1. Unscrew and pull out the crown to the 1st position.
2. Rotate the crown clockwise (upward) to set the date.
3. Push the crown back in and screw it back to the normal position.

For Push Crown:

1. Pull out the crown to the 1st position.
2. Rotate the crown clockwise (upward) to set the date.
3. Push the crown back in to the normal position.

Important Note: If the date is changed between 10:00 PM (22:00) and 12:00 AM, set the date to the following day. This is because no date change will take place at midnight.