DIGITUS Ergonomic Stool / Standing Aid
Height-Adjustable with Gas Pressure Spring
Model: DA-90422
Assembly Instructions
Follow these steps to assemble your DIGITUS ergonomic stool:
- Step 1: Remove and discard the red plastic cap covering the tip of the gas spring.
- Step 2: Insert the gas spring (C) into the base (D). Once aligned correctly, press down firmly.
- Step 3: Connect the Plastic Collar (B) to the Seat (A) by resting the Seat on the cushion and firmly pressing the Plastic Tube against the seat.
- Step 4: Gently slide the seat onto the gas spring. Once aligned properly, press down firmly on the seat.
Important Warning
Warning: The red plastic cap must be removed before use. Failure to remove it will make the stool malfunction.
Operating Instructions
Learn how to adjust the height of your stool:
- Step 1: To Raise the Seat: Gently press any 1 of the 3 underseat buttons.
- Step 2: To Lower the Seat: Gently press any 1 of the 3 underseat buttons and simultaneously press down on the seat (or sit on the seat).
Tips for Operation
- If the seat does not raise easily:
- 1. Be sure the red plastic cap on top of the gas spring has been removed.
- 2. If the stool is assembled correctly, apply additional pressure to the seat by pushing down or sitting on it to secure the connection for proper use.
Sitting Instructions
- Step 1: Base Stability: The stool's base is designed to be unstable. The stool rocks, tilts, tips, and the seat swivels 360°. It is not a stationary chair. Extreme care must be used when sitting on the stool.
- Step 2: Proper Seating Posture: Only sit on the stool if both of your feet are planted firmly on the ground, supporting your entire bodyweight.
Safety Warnings
- Do not lean back. To reduce fall risk, do not tip the wobble stool past vertical.
- Not for use by children.
- Do not use with only 1 foot or no feet on the ground.
Manufacturer Information
Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post from the manufacturer at the address below.
Website: www.assmann.com
Address: Assmann Electronic GmbH, Auf dem Schüffel 3, 58513 Lüdenscheid, Germany.