InSinkErator Model 55 Food Waste Disposer
Solutions for sinks
Model 55
Category Benefits:
- Food waste is ground into particles and flushed away in seconds.
- Clean, hygienic, convenient, and simple to use.
- Easy method to manage food waste in the home, saving time and minimizing trips to the outside dustbin.
- Permanent in-house solution that is compact and sits under the sink without taking up valuable storage.
- Easy to install into new or existing kitchens and can be fitted to most sinks.
- Environmentally responsible, helping reduce the amount of waste that goes to landfill sites.
Features
- 1-stage grind technology
- High-torque Dura-Drive™ induction motor
- 3 year warranty
- Stainless steel grind elements
- Continuous feed
- Overload protection
- Quick Lock® mounting assembly for faster, easier installation
- Air switch accessory available
Sample Specification
Food waste disposer(s) shall be InSinkErator® Model 55 with 1-stage grind technology, .55 hp motor, and stainless steel grind elements. Warranty: 3 year parts and service.
Dimensions (mm)
Diagram Description: A schematic drawing shows a cylindrical unit with dimensions labeled A, B, C, D, and E. The labels correspond to the following measurements:
- Model 55:
- A: 318 mm
- B: 168 mm
- C: 64 mm
- D: 173 mm
- E: 131 mm
InSinkErator reserves the right to change product specifications without prior notice. The disposer described in this leaflet is for household use; usage in commercial situations is not covered by warranty.
Specifications
Specification | Details |
---|---|
Type of Feed | Continuous |
On/Off Control | Wall Switch |
Motor | Single Phase |
Time Rating | Intermittent |
Lubrication | Permanently Lubricated Upper & Lower Bearings |
Shipping Weight (Approx.) | 7.2 kg |
Overall Height | 318 mm |
Grind Technology | 1-Stage Grind Technology |
Grind Chamber Capacity | 980 ml |
Motor Protection | Manual Reset Overload |
Volts/Hz | 220-240V, 50 Hz |
HP | .55 |
RPM | 1425 |
Average Load | 370w |