InSinkErator Evolution® 200
Food Waste Disposer
Product Overview
The InSinkErator Evolution® 200 is a high-performance food waste disposer designed for modern kitchens.
Category Benefits:
- Food waste is ground into particles and flushed away in seconds.
- Provides clean, hygienic, convenient, and simple operation.
- Offers an easy method to manage food waste, saving time and reducing trips to the outside rubbish bin.
- Designed for easy installation into new or existing kitchens and fits most sinks.
- Environmentally responsible, helping to reduce the amount of waste sent to landfills.
Key Features
- Evolution ultra-quiet technology for reduced noise.
- Evolution 3-stage grind technology for efficient processing.
- Auto-reverse grinding action to prevent jams.
- High-torque Dura-Drive™ induction motor for powerful performance.
- Built-in air switch with a chrome button for convenient activation.
- 6-Year guarantee for parts and service.
- Durable stainless steel grind elements and grind chamber.
- Overload protection for safety.
- Quick Lock® mounting assembly for faster, easier installation.
Sample Specification
The InSinkErator® Model Evolution 200 features 3-stage grind and ultra-quiet technologies, a 1 hp (110-120V) or 0.75 hp (220-240V) motor, auto-reverse grind system, stainless steel grind chamber, grinding elements, and a built-in air switch in chrome. The product comes with a 6-Year guarantee for parts and service, detailed in the Care & Use Booklet.
Dimensions
Dimensions are provided in centimeters (cm) for the Evolution 200 model:
| Dimension | Size (cm) |
|---|---|
| A | 33.0 |
| B | 18.5 |
| C | 6.4 |
| D | 23.4 |
| E | 16.8 |
Note: InSinkErator reserves the right to change product specifications without prior notice. This disposer is intended for household use only; commercial usage is not covered by warranty.
Technical Specifications
| Specification | Details |
|---|---|
| Type of Feed | Continuous |
| On/Off Control | Wall Switch or Built-In Air Switch |
| Motor | Single Phase |
| Reversing | Auto-Reverse Grind System |
| Time Rating | Intermittent |
| Lubrication | Permanently Lubricated Upper & Lower Bearings |
| Shipping Weight (Approx.) | 11.4 kg |
| Unit Finish | Stainless Steel Light Gray |
| Overall Height | 33.0 cm |
| Grind Technology | 3-Stage Grind Technology Jam Preventing Circuit |
| Grind Chamber Capacity | 1180 ml |
| Motor Protection | Manual Reset Overload |
| Average Water Usage | Approximately 1% of household water consumption |
| Average Electrical Usage | 3-4 KWH p.a, equal to approx. $3.50 p.a |
| Drain Connection | 1-1/2" (3.81 cm) Anti-Vibration (Hose Clamp) |
| Dishwasher Drain Connection | No |
Sound and Vibration Features
- Anti-Vibration Mounting and Tailpipe
- Quiet Sink Baffle
- Multi-Layer Sound Insulation
- Premium Stainless Steel Stopper
Electrical Specifications
| Volts/Hz | HP | Average Load |
|---|---|---|
| 120V, 60 Hz | 1.0 | 10.2 A |
| 220-240V, 50-60 Hz | .75 (@240V/50Hz) | 370 W |
Contact Information
InSinkErator Australia
471 Mountain Highway,
Bayswater VIC 3153, Australia
Sales/Service Tel: 1300 136 205
Sales/Service Fax: (03) 9720 3178
Website: www.insinkerator.com.au
InSinkErator Australia
