De'Longhi Automatic Coffee Machine

Important Safeguards

When using any electrical appliance, observe basic safety precautions:

• Read all instructions carefully.
• Ensure your electrical system voltage matches the machine's rating.
• Avoid touching hot surfaces; use handles or knobs.
• To prevent fire, electric shock, or injury, do not immerse the cord, plug, or appliance in water or other liquids.
• Keep the appliance out of reach of children and do not leave it unattended during operation.
• Disconnect the plug from the power outlet when not in use and before cleaning.
• Do not operate with a damaged cord or plug, or after faulty operation. Contact De'Longhi Customer Service.
• Use only manufacturer-recommended accessories.
• Do not use the machine outdoors.
• Ensure the power cord does not hang over edges to prevent entanglement.
• Do not place the machine near electric stoves or cooking surfaces.
• Plug into a wall outlet. To disconnect, turn the machine OFF first, then remove the plug.
• Use the machine only for its intended household purpose. The manufacturer is not responsible for damage from improper use.
• WARNING: Do not remove covers or attempt repairs yourself; this voids the warranty. Repairs must be done by authorized personnel.

Save these instructions.

Short Cord Instructions

A short power cord reduces entanglement risks. Longer, detachable cords or extension cords may be used if handled with care. Ensure the extension cord's electrical rating is at least as great as the appliance's. If the appliance has a 3-wire grounding cord, use a 3-wire grounding extension cord. Arrange cords to prevent tripping hazards.

The product features a polarized plug (one blade wider than the other) for safety; it fits the outlet only one way. If it doesn't fit, try reversing it. If it still doesn't fit, contact an electrician to replace the outlet.

Introduction

Thank you for choosing this De'Longhi coffee machine. Please read this instruction manual to avoid risks and damage to the appliance.

Troubleshooting and Repairs

For issues, first consult the 'Troubleshooting' section. If the problem persists or for further information, contact De'Longhi customer services using the addresses provided in the guarantee certificate.

Description of Appliance

Key components include:

• A: Beans container and pre-ground coffee lid
• B: Pre-ground coffee funnel
• C: Beans container
• D: Pre-ground coffee funnel seat
• E: Water tank lid
• F: Water tank
• G: Control panel
• H: Coffee spout
• I: Infuser
• L: Tray assembly
• M: Cup holder
• N: Cup tray
• O: Drip tray water level indicator
• P: Disposal water container
• Q: Coffee grounds container
• R: Drip tray
• S: Carafe (some models only)
• T: Ground coffee measure
• U: "Total Hardness Test" indicator paper
• V: Descaler
• Z: Draining tray

Before Use

Checking the Appliance

After unpacking, verify the product is complete and undamaged, and all accessories are present. Do not use if visibly damaged; contact De'Longhi Customer Services.

Installing the Appliance

Follow these safety warnings:

• The machine generates heat. Allow at least 1.18 in / 3 cm clearance on the sides and rear, and 5.6 in / 15 cm above the machine.
• Prevent water from entering the machine to avoid damage. Do not place near taps or sinks.
• Do not install where temperatures can drop below freezing, as water inside could freeze and damage the appliance.
• Arrange the power cord to prevent damage from sharp edges or hot surfaces. Adjust cord length and store excess.

Connecting the Appliance

Verify the mains voltage matches the rating plate. Connect to an efficiently earthed socket with at least a 10A rating. If the socket is incompatible, have it replaced by a qualified professional.

Rinse all removable accessories that contact water with hot water before first use. The machine may be noisy initially as the water circuit fills; noise decreases as it fills. Traces of coffee in the grinder are normal from factory testing.

First Use

1. Connect the appliance to a mains socket. The (brew) button will blink, and the indicator light will turn on.
2. Remove the water tank (F), fill to the MAX level with fresh water, and replace it correctly.
3. Place a container (minimum 7 fl oz / 200 ml) under the coffee spout (H).
4. Press the (brew) button. Water will dispense from the coffee spout.

The coffee machine is now ready. Initial brews may require adjustment for satisfactory results. If no water dispenses and the (brew) button flashes, press it again.

Settings

Use the (settings) button to adjust AM-PM/24h time, hours, minutes, acoustic signal, temperature, water hardness, and auto-on.

Set the Time

• Press the (time) button; AM will display. Press the (time) button to select AM, PM, or 24h format.
• To set the hour, press the (time) button; the hour will blink. Press the (hour) button to set the desired hour. Press the (time) button again; the minutes will blink. Press the (minute) button until the desired minutes are displayed.

Auto-on

The appliance will dispense the selected drink at the set time. Place a cup under the spout. Auto-on must be reactivated each time; it resets after use.

• Press the (auto-on) button; the auto-on icon blinks.
• Press the (auto-on) button; the auto-on icon lights up.
• Press the (size) button; beverage size and type icons light up.
• Press the (size) button to select the desired coffee quantity.
• Three strength levels (light, gold, bold) will light up. Press the (type) button to set the desired strength.
• Press the (confirm) button; the hour blinks.
• Press the (hour) button to set the desired hour and press (confirm).
• The minutes blink. Press the (minute) button to set the desired minutes and press (confirm); the auto-on icon remains lit.

Shortcut Auto-on: Press and hold the (auto-on) button for 3 seconds to enable or disable settings.

Acoustic Signal

Press the (signal) button; the (signal) icon lights up. Press the (signal) button to activate (icon blinks) or deactivate (icon lights up) the acoustic signal.

Set Coffee Temperature

Press the (temp) button; the (temp) icon lights up. Press the (temp) button to set the desired temperature (1-low, 2-medium, 3-high). The icon blinks to confirm the setting upon exiting the menu.

Water Hardness

• Press the (water hardness) button; the (water hardness) icon lights up. Press the (water hardness) button to set hardness (1, 2, 3, or 4).
• Measuring Water Hardness: Remove the total hardness test paper, immerse it in water for one second, remove, and shake lightly. After a minute, 1-4 red squares will form, indicating water hardness level.

Auto-off: The appliance switches off automatically after 30 minutes. This setting cannot be changed.

Making Coffee

1. Fill the water tank (F) with fresh water.
2. Press the (brew) button. The appliance is ready when the main screen appears.
3. Open the cup holder (M) and place a cup or mug under the coffee spout (H). If using the carafe (S), place it on the cup tray (N).
4. Fill the beans container (C) with coffee beans. The (beans) icon lights up when the level is low.
5. For pre-ground coffee, add it to the pre-ground coffee funnel seat (D) using the measure (T).
6. Press the (size) button to select the desired coffee quantity (e.g., 3 oz espresso style, or 6 other coffee quantities). The selected beverage light will illuminate.
7. Press the (type) button to select coffee strength (light, gold, bold) and special types (e.g., over ice). The selected beverage light will illuminate.

Pre-ground Coffee

• To prepare pre-ground coffee, select the (pre-ground) option.
• Add pre-ground coffee using the measure (T) into the funnel seat (D).
• Press the (brew) button. The appliance dispenses the selected beverage. Pre-ground coffee is available for 3oz, 8oz, 12oz, and 16oz sizes only.

Do not exceed suggested quantities.

Over Ice

• To prepare an 'over ice' beverage, select 'over ice'.
• Press the (brew) button.
• Press the (type) button to select strength (light, gold, bold). If no selection is made, the panel returns to the main screen after 5 seconds.
• Fill a large cup or mug with ice cubes.

(*) One ice cube is approximately 16 g of water.

• Press the (brew) button. The appliance dispenses the selected beverage.
• To turn off, press the (power) button. The appliance performs an internal rinse cycle.

Carafe (S) (Some Models Only)

Ensure the carafe (S) is clean and empty before brewing. Residual coffee can affect taste and cause overflow. Lock the carafe lid and place it under the coffee spout.

Pre-heating

Pre-heating the carafe or cup is recommended for best results. A pre-heated carafe helps maintain optimal coffee temperature for longer. To pre-heat, fill with hot water, wait 30 seconds, then empty.

Cleaning the Carafe

After each use and before brewing, empty the carafe. Rinse the carafe and lid under warm running water. Wash regularly with warm, soapy water and a soft brush. Rinse and dry. Do not use abrasive pads or cleaners that could scratch the surface.

Cleaning

Important: Turn off and unplug the appliance before cleaning. Do not use solvents, abrasive detergents, or alcohol. Avoid metal objects for removing coffee deposits, as they can scratch surfaces. The disposal water container (P), coffee grounds container (Q), and carafe (S) are dishwasher safe; other parts are hand-wash only.

Regular Cleaning of Parts:

• Coffee Grounds Container (Q): The (grounds) icon lights up when full. Remove the tray assembly (L), empty and clean the grounds container thoroughly. Some coffee residue in the unit or near the infuser is normal. The appliance cannot be used until the grounds container is clean. Empty it every two to three days, even if not full.
• Disposal Water Container (P): Empty and clean with a damp cloth and mild washing-up liquid.
• Drip Tray (R): The drip tray has a water level indicator (O). Empty and clean the drip tray before the indicator protrudes from the cup tray (N) to prevent overflow and damage. Note: When cleaning the drip tray, always empty the grounds (Q) and water (P) containers completely.
• Infuser (I) and Draining Tray (Z): Clean the infuser at least monthly. Press the two red release buttons inwards, pull the infuser out, soak in water for 5 minutes, then rinse. Do not use detergents on the infuser. Remove coffee residues from the infuser housing. Extract, empty, and rinse the draining tray (Z), then replace it correctly. After cleaning, reinsert the infuser by sliding it onto the internal support and pushing the PUSH symbol until it clicks. Note: The infuser cannot be extracted while the machine is on. Ensure the machine is properly shut down.
• Pre-ground Coffee Funnel (B): Check monthly for blockages. Remove coffee deposits with a brush. The funnel can be removed for better cleaning.
• Water Tank (F): Clean regularly (monthly) with a damp cloth and mild washing-up liquid.
• Coffee Spout (H): Clean regularly with a sponge or cloth. Check for blockages in the spout holes and clear with a toothpick if necessary.

Descaling

Descale the machine when the (descale) button lights on. Read descaler instructions carefully. Use only De'Longhi descaler. Improper descaling may void the warranty and damage surfaces. If spilled, dry immediately. The process takes about 30 minutes.

1. Press and hold the (descale) button for 3 seconds. The (descale) icon lights up.
2. Empty the drip tray (R) and coffee grounds container (Q). The (empty) icon lights up.
3. Pour descaler into the water tank (approx. 3.5 fl oz / 100ml pack) and add water (approx. 35 fl oz / 1 liter). Replace the water tank.
4. Place a container (min. 70 fl oz / 2 liters) under the coffee spout (H).
5. Press the (brew) button. The (brew) button blinks, and the (heat) and (water) icons light up.
6. The descaling program starts, dispensing descaler liquid through the spout. Rinsing and pausing cycles remove scale residues.
7. The appliance is ready for rinsing with clean water. The (rinse) icon lights up. Empty the descaler collection container. Empty, rinse the water tank, and refill with fresh water to MAX.
8. Empty the drip tray (R) and coffee grounds container (Q). The (empty) icon lights up. Fill with fresh water to MAX and replace.
9. Place the empty rinse collection container under the coffee spout.
10. Press the (brew) button. Hot water dispenses. The (heat) and (water) icons light up.
11. At the end of the cycle, the (rinse complete) icons light up.
12. After rinsing, remove the tray assembly (L), empty the disposal water container (P), and replace it. Empty the rinse water container, refill the water tank with fresh water to MAX, and replace it.
13. The descaling cycle is complete; the appliance turns off.
14. When restarting, the water alarm will activate, and the (brew) button will blink. Press (brew) to refill the circuit.

Note: An extra descaling cycle can be run by pressing the (descale) button for 3 seconds.

Icon Messages

Troubleshooting

• Appliance does not turn on: Plug into the main socket.
• Appliance does not start: Insert tray assembly (L), disposal water container (P), and coffee grounds container (Q) correctly.
• Appliance does not respond to commands: Insert tray assembly (L), disposal water container (P), and coffee grounds container (Q) correctly.
• Water tank (F) is full but (water) icon lights up: Insert water tank correctly and press (brew) to start the circuit filling procedure.
• Coffee grounds outside container after removing tray assembly: Pre-ground coffee may have been added while the unit was off. Follow the 'pre-ground' procedure.
• Infuser cannot be extracted: The unit must be completely turned off to extract the infuser.

Technical Data

• Voltage: 120 V~ 60 Hz (see rating label)
• Absorbed power: See rating label
• Max. water tank capacity: 60 oz / 1.8 l
• Max. beans container capacity: 0.55 lb / 250 g
• Size (LxDxH): 12 x 15 x 15.8 in / 303 x 390 x 403 mm
• Weight: 20.2 lb / 9.2 kg