Kogan 3-in-1 Premium Steam Mop User Guide

Safety & Warnings

Warning: Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, or serious injury.

When using electrical appliances, follow basic safety precautions to reduce risks of fire, electric shock, personal injury, and material damage.

• Read this user guide carefully before use.
• Use the appliance only for its intended purpose as described.
• Retain this guide for future reference.

Using the Steam Mop

• Do not direct steam at people, animals, electrical appliances, or outlets.
• Do not expose to rain.
• Do not immerse the appliance in water.
• Do not leave unattended; keep children away.
• Do not leave connected to an outlet when not in use.
• Never pull the power cord to disconnect; keep cord away from heat, oil, and sharp edges.
• Do not handle with wet hands.
• Do not pull or carry by cord, use cord as a handle, close doors on cord, pull around sharp corners, or expose to heated surfaces.
• Do not use in enclosed spaces with flammable vapors (e.g., oil-based paint thinner).
• Do not use on leather, wax-polished furniture/floors, synthetic fabrics, velvet, or delicate, steam-sensitive materials.
• Do not use on unsealed hard floor surfaces or waxed floors (may remove sheen); test an isolated area first and check floor manufacturer's instructions.
• Never add de-scaling, aromatic, alcoholic, or detergent products to the steam mop.
• If the circuit breaker activates, discontinue use and contact help.kogan.com.
• The appliance emits very hot steam; steam head and cleaning pads get very hot.

Important Cautions

• Always wear suitable shoes; avoid slippers or open-toed footwear.
• The lid may become hot during use.
• Do not touch parts that may become hot.
• Ensure microfibre cleaning pads are correctly fitted.

Safety of Others

• Appliance not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience, unless supervised.
• Supervise children to ensure they do not play with the appliance.

Residual Risks

Even with safety regulations, residual risks exist, including:

• Injuries from touching moving parts.
• Injuries from touching hot parts.
• Injuries when changing parts or accessories.
• Injuries from prolonged use (take regular breaks).

WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN

Swallowing button batteries can cause serious injury or death within hours due to chemical burns and perforation. If swallowed, call poison control immediately (Australia: 13 11 26, New Zealand: 0800 764 766). Ensure battery compartments are secured. Dispose of used batteries safely. Inform others about battery risks.

Components

The Kogan 3-in-1 Premium Steam Mop includes the following components:

• A: Main body - Houses the water tank and heating element.
• B: Handle tube - Connects the handle to the main body.
• C: Handle - Ergonomic grip for controlling the mop.
• D: Mop head - The part that contacts the floor and emits steam.
• E: Microfibre pad - Attaches to the mop head for cleaning.
• F: Carpet glider - Accessory for use on carpets.
• G: Measuring cup - For filling the water tank.

Assembly

Note: The unit is tested before sale; water residue may be present.

Attaching the Handle

1. Slide the handle (C) into the handle tube (B) until it clicks into place.
2. Slide the handle tube (B) with the handle attached into the main body (A) until it clicks into place.
3. To remove the handle tube for storage, push the release button.

WARNING: Do not pull hard on the spring during assembly.

Attaching the Steam Head

1. Slide the bottom end of the main body onto the steam head until the Steam Head Spindle clicks into place.
2. To remove the steam head, press the salient point on the Steam Head Spindle.

Attaching a Cleaning Pad

1. Place the microfibre cleaning pad (E) onto the bottom of the steam head.
2. To remove the pad, place the front of your shoe onto the cleaning pad removal tab and press down firmly.

Attaching Carpet Glider

1. Ensure the microfibre cleaning pad is fitted before attaching the carpet glider.
2. Attach the carpet glider by clipping it onto the steam head and applying vertical pressure until it clicks into place.
3. To remove the carpet glider, place the front of your shoe onto the cleaning pad removal tab and press down firmly.

Filling the Water Tank

Method One:

1. Open the water tank cap.
2. Use the measuring cup (G) to fill the water tank with 420mL of water.
3. Close the water tank cap securely.

Method Two:

1. Remove the water tank from the main body.
2. Open the water tank cap.
3. Fill the water tank from a water faucet.
4. Replace the water tank cap.
5. Install the water tank back into the main body until it clicks into place.

Operation

1. Install the button battery into the handle battery compartment.
2. Plug the appliance into a grounded wall outlet.
3. Press the power switch. The indicator lights will turn red, indicating preheating. If lights do not turn on, consult the Troubleshooting section.
4. The appliance has a warm-up time of 25 seconds. When preheating is complete, the indicator light will turn blue, and the appliance is ready for use.

Notes: If power is interrupted during warm-up or after completion, turn the power back on. The appliance may repeat the warm-up operation.

• Continuous steam output: Approximately 16-26g/min (up to 5 minutes continuously).
• Total steam output time: Approximately 10-20 minutes.

Cleaning & Care

WARNING: Do not immerse the appliance in water.

Ensure the product is powered off and unplugged before cleaning. Empty and clean the water tank after every use.

How to Decalcify the Water Tank Interior

To clean calcium deposits, add one or two tablespoons of white vinegar to the water tank, shake, let sit for several hours, then pour away the solution and rinse with clean water.

Cleaning Procedure to Remove Scale

If steam output is reduced, lime scale may need removal. This can affect performance. Remove lime scale every 25-50 uses or monthly, especially in hard water areas. Frequency depends on water hardness.

Using Cleaning Solution:

1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2. Position the unit safely, aim steam away from surfaces. Plug in and turn on to produce steam until the solution is used up.
3. Repeat if necessary until normal steam flow is achieved.
4. Fill the water tank with fresh water and rinse.
5. Fill the water tank with fresh water, attach, and release steam until the tank is empty.

WARNING: Do not leave the appliance unattended during the lime scale removal process.

Notice

Perform a test cleaning on a suitable isolated area after descaling to ensure no debris remains. This product has no serviceable parts; any servicing must be done by a qualified technician or authorized service representative.

Cleaning Microfiber Pad

• Machine washable on "warm" setting with mild detergent.
• Lay flat to dry for best results.
• Allow the steamer to cool completely before maintenance.
• Never use bleach or fabric softener on the microfiber pad.

Storage

• Turn power off and unplug the power cord.
• Empty the water tank and clean the exterior with a dry cloth until the unit cools down.
• Remove and wash the cleaning pad for future use.
• Store the product in a protected, dry area. Keep the water funnel and measuring cup.
• Keep out of reach of children.

Notes: After cleaning, remove the water tank before turning off the power. Let the product run until no steam is emitted to clear pipes for storage.

Specifications

Troubleshooting

Use this guide to resolve common issues. For further assistance, contact help.kogan.com.

WARNING: Unplug the steamer and allow it to cool before servicing.

Disposal

This symbol ♻️ indicates that the appliance should not be disposed of with household waste. Recycle responsibly to promote sustainable resource reuse.