Graff Showerheads and Bodysprays Installation Instructions

General Care and Maintenance

For care, use a soft towel with soap and water only. Under no circumstances should any chemicals be used. Avoid abrasive cleaners, acids, or solvents, as these can damage the product's finish. Gently wipe with a damp cloth and blot dry with a soft towel.

Product Information

Graff products are designed and engineered to meet high quality and performance standards. Ensure proper installation to avoid damaging the finish.

Contact and Support

For assistance or questions, a hotline is available: 1-800-954-GRAF (4723). Further information can be found on the website: www.graff-faucets.com or www.graffcollection.com.

Key Product Models Covered:

• Showerheads: AQUA-SENSE G-8201, G-8200, G-8210, G-8576
• Bodysprays: Models 8495, 8497
• Handshower Set W/Wall Bracket: Model 8649
• Thermostatic Valves: Models 8000, 8005, 8010, 8036, 8041, 8046
• Stop/Volume Control Valves: Models 8070, 8075, 8093, 8095

Installation Guidelines:

Detailed step-by-step instructions are provided for each product type, including:

• Preparation of the mounting area.
• Assembly of components using provided tools and parts.
• Connection to water supply.
• Testing and calibration for proper function.
• Specific notes on handle selection and compatibility.
• Diagrams illustrating component placement and assembly sequences.

Important Notes:

• Always read all instructions completely before beginning installation.
• Observe all local plumbing codes.
• Ensure correct water pressure and temperature for optimal performance.
• Check for leaks after connecting water supply lines.
• Handle all components with care to avoid damage to the finish.