ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

SENECA KEY Series Multiprotocol Gateways User Manual

This user manual provides comprehensive guidance for SENECA's KEY series multiprotocol gateways. These devices enable efficient data conversion between Modbus serial/TCP and the IEC 61850 industrial automation protocol.

Key Topics Covered:

Product features and technical specifications
IEC 61850 and Modbus protocol integration
FLEX technology for protocol customization
Device hardware, firmware, and LED status
Ethernet and serial port configuration
Webserver-based setup and operation
Modbus register mapping and data handling
Factory reset procedures

The manual details the operation and configuration for models including the Z-KEY-I, R-KEY-LT-I, and Z-KEY-2ETH-I. For further support, consult the SENECA website.

Models: Z-KEY-2ETH-I Protocol Converter, Z-KEY-2ETH-I, Protocol Converter, Converter

File Info : application/pdf, 48 Pages, 1.25MB

mi00705-2-en

References

Microsoft Word 2019

Related Documents

	SENECA Industrial Gateways: Protocol Converters for R-KEY & Z-KEY Models Explore SENECA's range of Industrial Gateways, including R-KEY and Z-KEY models. These protocol converters facilitate seamless data transfer between various industrial networks and fieldbuses, supporting protocols like Modbus, Profinet, Ethernet/IP, OPC UA, and IEC 61850.
	Seneca KEY Series Gateways User Manual: OPC-UA / Modbus RTU&TCP Comprehensive user manual for Seneca's KEY series multiprotocol gateways, detailing configuration, operation, and features for OPC-UA and Modbus communication protocols. Covers hardware, firmware, operating modes, web server access, and Modbus register information.
	Manuale Utente Z-KEY MBUS R-KEY MBUS - SENECA Manuale utente per i gateway SENECA Z-KEY MBUS e R-KEY MBUS, che convertono protocolli MODBUS (TCP-IP / RTU) in M-BUS (Meter Bus). Include guide alla configurazione, connessione, gestione dei dispositivi e protocolli supportati.
	SENECA Gateway Industriali: Convertitori di Protocollo R-KEY e Z-KEY Scopri la gamma di Gateway Industriali SENECA, convertitori di protocollo R-KEY e Z-KEY. Soluzioni flessibili per la comunicazione tra reti industriali, supportando Modbus, Profinet, Ethernet/IP, OPC UA e IEC 61850.
	SENECA Z-KEY MBUS and R-KEY MBUS User Manual This user manual provides comprehensive information on the SENECA Z-KEY MBUS and R-KEY MBUS devices, covering their features, configuration, operation, and troubleshooting. It details how to connect these Modbus (TCP-IP / RTU) to M-Bus (Meter Bus) gateways with PLCs and SCADAs, manage M-Bus devices, update firmware, and map Modbus registers.
	SENECA R-KEY-LT / R-KEY-LT-P Installation Manual Installation manual for SENECA R-KEY-LT and R-KEY-LT-P industrial gateways, detailing module layout, LED signals, device configuration, technical specifications, DIP-switch settings, and electrical connections.
	SENECA R-KEY-LT / R-KEY-LT-P Installation Manual - Industrial Gateway Comprehensive installation manual for SENECA R-KEY-LT and R-KEY-LT-P industrial gateways. Covers setup, configuration, technical specifications, and electrical connections.
	SENECA IIoT Edge Gateways User Manual: Configuration and Operation Guide Comprehensive user manual for SENECA's IIoT Edge Gateways (SSD, R-PASS, Z-PASS series). Covers setup, configuration, industrial protocols (Modbus, OPC-UA), data acquisition, security, and advanced features for industrial automation.