XTM 4x4 Accessories

Part List & General Information

General Information:
Overall closed dimensions: L891 x W576 x H122mm
Internal dimensions of fridge slide: L846 x W529 x H34mm
Net weight: 32kg

Mounting Kit:
This kit includes the necessary hardware for installation:

• 6 x M6 x 20mm Bolts
• 6 x M6 Tee nuts
• 6 x M6 Nyloc nuts
• 6 x M6 Washers

Tie Down Kit:
This kit includes straps to secure your fridge:

• 4x Nylon straps

Diagram Description: A diagram shows the black, rectangular camp kitchen unit with a slide-out mechanism, featuring a flat top surface and a side compartment. Illustrations also depict the mounting hardware (bolts, nuts, washers) and four reel-style tie-down straps.

Preparing For The Camp Kitchen X-Lite Installation

This camp kitchen requires installation on a flat, even surface with a minimum thickness of 12 mm. An electric drill is needed for installation.

Installation Steps:

1. Extend the Slide: Pull out both the fridge slide and stove top by pressing the lock levers on both sides. Fully extend to reveal the fixing holes on the side rails.
   Diagram Description: An illustration shows the camp kitchen slide extended. Red arrows indicate pressing lock levers and pulling out the slide to expose fixing holes on the side rails.
2. Mark Drilling Points: Mark the six drilling points through the fixing holes using a permanent marker.
   Diagram Description: An illustration shows the extended slide with red arrows pointing to six marked drilling points on the surface below.
3. Drill Holes: Drill six 7mm holes for the Tee Nuts.
   Diagram Description: An illustration depicts a drill bit creating a 7mm hole.
4. Insert Tee Nuts: Insert the Tee Nuts into the drilled holes, ensuring they are upright and square to the hole.
   Diagram Description: An illustration shows a tee nut being inserted into a hole, oriented correctly.
5. Flatten Tee Nuts: Flatten the Tee Nuts using a mallet or hammer.
   Diagram Description: An illustration shows a tee nut being secured or flattened with a mallet.
6. Position and Secure: Position the Camp Kitchen X-Lite on the flat surface. Use the 6 x M6 bolts to fix it securely to the surface.
   Diagram Description: An illustration shows the camp kitchen unit placed on a surface, with an M6 bolt being used for fastening.

Tie Down the Fridge

Secure your fridge onto the fridge slide tray using the 4 nylon straps provided. Ensure the straps are tight and secure.
Diagram Description: An illustration shows four tie-down straps being used to fasten a rectangular fridge onto the extended slide tray of the camp kitchen.

Important Notes

• The camp kitchen X-lite must be securely and evenly installed on the surface of the vehicle or wherever it is to be used.
• The maximum weight capacity of the fridge slide is 80KG.
• The maximum weight capacity of the stove top is 40KG.