Introduction
The iTECHWORLD iTECHDCDC25 is a versatile 12V/24V 25A DC-DC and MPPT solar battery charger designed for automotive and recreational use. It efficiently charges various battery types, including lead-acid (AGM, Gel, Calcium) and LiFePO4, utilizing dual inputs from solar panels and vehicle alternators. Built for durability and performance in harsh environments, it features an IP67 rating and advanced protection systems.
Key Features
- Suitable for Lead Acid (STD, GEL, AGM, Calcium) and LiFePO4 batteries.
- 40A MPPT Solar Regulator.
- Dual input from solar and alternator.
- Up to 95% charging efficiency.
- IP67 rated for dust, water, and shock resistance.
- Smart alternator compatible.
- Built-in safety protections (Low/Over Voltage, Over-Temperature, Reverse Polarity).
Safety Information
This user guide emphasizes critical safety precautions for the correct installation and operation of the iTECHDCDC25 charger to prevent damage, fire, or injury. Users are advised to read and understand all instructions before use.
Specifications Overview
Key specifications include a wide vehicle input voltage range (9-32V), a maximum input current of 25A, and an output current of up to 25A. The charger operates efficiently across a temperature range of -20°C to +80°C and supports a 3-stage charging process for optimal battery health.
Contact Information
For support or inquiries, iTECHWORLD can be contacted at 281 Great Eastern Hwy, Burswood WA 6100, by phone at 1300 483 249, or via email at service@itechworld.com.au. Further information is available on their website: www.itechworld.com.au.
