Philips Cinnabar Ceiling Light Installation Guide
Safety Information and Symbols
Important Symbols:
- ?: Indicates the need for proper earthing (grounding).
- ??: This fixture is not designed for connection via a mains plug.
- [connect to mains]: Arrow pointing towards a house symbol indicates connection to the main electrical supply.
- 3m: Minimum clearance of 3 meters required.
- 3/8" (approx. 9mm): Wire stripping length.
- >5cm: Minimum clearance of 5 centimeters required.
- ⚠️: Warning symbol indicating potential electrical hazard.
- LED: Indicates the use of LED technology.
- [motion/presence detection]: Symbol suggesting compatibility or integration with motion or presence detection systems.
Installation Instructions
Step 1: Power Off
Turn off the main power supply at the circuit breaker. The diagram shows a hand pressing a switch on a circuit breaker panel to the "OFF" position.
Step 2: Remove Luminaire Cover
The diagram illustrates the outer cover of the light fixture being detached. Curved arrows indicate a twisting motion, followed by an upward arrow showing the cover being lifted off.
Step 3: Prepare Mounting Bracket
This step shows the internal mounting bracket of the luminaire. It features electrical connection terminals and screw holes for securing it to the ceiling.
Step 4: Mount Bracket to Ceiling
Position the mounting bracket on the ceiling. Screws are shown being inserted through the bracket into the ceiling surface, possibly using wall plugs. A screwdriver is depicted for tightening. Icons indicate suitability for both Phillips and flathead screwdrivers.
Step 5: Connect Electrical Wiring
Prepare the electrical wires (live, neutral, earth). The diagram shows a terminal block with push-in connectors. Wires are inserted into the correct terminals. A tool, such as a screwdriver, is shown for wire preparation. The diagram specifies a wire stripping length of 8mm and a minimum clearance of >5cm.
Step 6: Attach Luminaire Body
Align the main body of the light fixture with the mounted bracket. Arrows suggest pushing and potentially rotating the body to lock it into place.
Step 7: Power On
Restore power by turning the main circuit breaker back on. The diagram shows a hand pressing a switch on a circuit breaker panel to the "ON" position.
Product Information
Model Numbers: 9150049872, 9150049873, 9150045708, 9150045709
Product Identifier: 3241 657 64621
Brand: Philips
Manufacturer: Signify
Trademarks: Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V.
Signify Contact:
- I.B.R.S./C.C.R.I. Numéro 10461
- 5600 VB Eindhoven, the Netherlands
- Signify Commercial UK Limited
- Unit 3, Guildford Business Park, Guildford, Surrey, GU2 8XG, UK
Website: www.philips.com/lighting
Copyright: © 2021 Signify Holding
Last Update: 29/01/21