Pyle 4-Inch Waterproof Rated Marine Tower Speakers

Product Overview

This document provides information for the Pyle 4-inch waterproof rated marine tower speakers, designed as a wakeboard subwoofer speaker system.

Picture Description: The image displays two marine tower speakers, one white and one black. The manual details the wiring for speaker power and LED lights, as well as Bluetooth connectivity.

• 1. Speaker power and LED power: White+
• 2. Speaker power and LED power: Blue-
• 3. Bluetooth+ (Red) connect to DC12V
• 4. Bluetooth- (Black) connect to DC12V

Wiring Diagram Description: The diagram illustrates connecting the positive and negative poles of two speakers (Speaker 1 and Speaker 2) respectively. It also indicates the DC12V/Bluetooth power connection points (labeled 3 and 4).

How to Connect Bluetooth?

To connect your device via Bluetooth:

1. Search for the device on your phone or tablet (device name: Pyle).
2. Enter the password: 0000.
3. Once a beep sound is heard, the connection is successful. You can now play music.

Features:

• Includes (2) Wakeboard Tower Speakers
• Waterproof Marine Grade Rated Construction
• Rugged & Weather-Resistant Housing
• Compact Mountable Design
• 2-Way Full Range Audio Speaker System
• Titanium Dome Tweeters
• Long Excursion Subwoofers
• Anti-Corrosion, UV Resistant Coating
• Integrated Universal Roll Bar Mounting Clamps

Technical Specifications:

• Waterproof Marine Grade Rating: IP-44
• Boat Roll Cage / Roll Bar Support Size: Up to 1.96" (5cm)
• Tweeter Type: Titanium Dome
• Frequency Response: 70Hz-20kHz
• Impedance: 4 Ohms
• Magnet: 10 Oz
• Sensitivity: 90 dB
• Construction Material: Engineered ABS Grills
• Speaker Housing Dimensions (L x W x H): 5.4" x 5.4" x 7.0" inches
• Speaker Housing Size (L x W x H) (with Mounting Bracket): 5.4" x 7.6" x 7.0" inches
• Sold as: Pair

Warnings and Compliance

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

RF Exposure Statement

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm from the radiator to your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.