Hama 12W Lightning Charger Kit

Introduction

Thank you for choosing this Hama product! Please take your time to read the following instructions and information completely. Keep these instructions in a safe place for future reference.

Package Contents

• Charger
• Charging cables
• Operating instructions

Safety Instructions

General Safety:

• Protect the product from dirt, moisture, and overheating; use only in dry rooms.
• Do not drop the product or expose it to major shocks.
• Do not operate the product outside the specified power limits.
• Do not modify the device; this voids the warranty.
• Do not continue to operate if visibly damaged.
• Use only for the intended purpose.
• Keep out of reach of children.
• Do not use near heaters, heat sources, or in direct sunlight.
• Route all cables to prevent tripping hazards.
• Do not bend or crush the cable.
• Always pull the plug, never the cable, to disconnect.
• Dispose of packaging material according to local regulations.
• Product is intended for indoor use only.
• Use only under moderate climatic conditions.
• Do not use in areas where electronic products are prohibited.
• Avoid damp environments and splashing water.

Risk of Electric Shock: ⚡

• Do not open the device or continue operation if damaged.
• Do not use if the AC adapter, adapter cable, or mains cable is damaged.
• Do not attempt self-service or repair. Leave all service work to qualified experts.

Operation

Mains Voltage: 100-240 V ℹ️

The charger is suitable for mains voltages of 100-240 V and can be used worldwide. A country-specific adapter may be necessary.

Connecting Devices: ⚠️

• Before connecting a device, check if the charger's current capacity is sufficient.
• Ensure the connected device's power does not exceed 12 W.
• Note the instructions in your device's operating manual.

Important Usage Notes: ⚠️

• Operate only from an approved, accessible socket near the product.
• Disconnect from mains using the power switch; if unavailable, unplug the power cord.
• When using multi-socket strips, ensure total power consumption of connected devices does not exceed the strip's rating.
• Disconnect from mains if not in use for a prolonged period.

Charging Procedure (if no specific instructions from device manual):

• Connect your device to the USB charging socket using a suitable USB cable.
• Connect the charger to a properly installed and accessible mains socket.
• Charging progress is displayed on your device.
• Disconnect the device from the charger to interrupt charging or when fully charged.
• Then disconnect the charger from the mains.

When charging batteries in a device, observe the maximum charging times for built-in batteries.

Care and Maintenance

Use only soft, dry towels for cleaning.

Note: ℹ️ Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Technical Data

Specifications according to Regulation (EU) 2019/1782

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

External Links

For service and support, visit: www.hama.com