MINISO Wireless Speaker M101 Product Manual
Please read this manual carefully before using the product and keep it in a safe place.
01 Product Description
Welcome to MINISO Wireless Speaker
A compact, square-shaped MINISO wireless speaker with rounded edges. The top surface features control buttons: a circular power button (⏻) with a TWS indicator, a play/pause button (▶️), volume down (➖), volume up (➕), and a Bluetooth symbol (⠂). A loop is attached to one corner. The side shows a USB Type-C charging port and a TF card slot.
A diagram of the MINISO wireless speaker is provided, labeling key components:
- LED indicator light on the top.
- Bottom view showing interfaces: USB interface, Charging interface, TF interface, and Charging indicator light.
Specification of Product
| Model of Product | M101 |
|---|---|
| Version | V5.4 |
| Effective Distance | Approx. 10m |
| Speaker Diameter | φ45mm |
| Impedance | 3Ω |
| Frequency Response | 50Hz-20KHz |
| Input | 5V=800mA |
| Output | 5W |
| Battery Capacity | 800mAh |
| Usage Time | Approx. 6.5 H |
| Charging Time | Approx. 4 H |
A diagram illustrates button functions and interface ports:
- Controls:
- 1. Power Button (⏻): Long press 2s/3s for Power On/Off/TWS pairing.
- 2. Multifunction Button (▶️): Single click for Play/Pause, Answer/End Call. Long press 2s for Call Rejection. Press and hold 2s to disconnect/connect Bluetooth.
- 3. Volume Down/Previous Song Button (➖): Single click for Volume Down. Long press 3s for Previous Song.
- 4. Volume Up/Next Song Button (➕): Single click for Volume Up. Long press 3s for Next Song.
- Interfaces (5): TF Card Slot, USB Port, TYPE-C Charging Port.
02 Touch Operation
Connect with Bluetooth device
To connect your Bluetooth device:
- Open the Bluetooth settings on your device.
- Search for available Bluetooth devices.
- Find and select "MINISO-M101" from the list.
- Tap to connect.
A smartphone screen displaying Bluetooth settings is shown, with the 'Bluetooth' toggle enabled and 'MINISO-M101' listed as 'Connected' under 'MY DEVICES'.
Indicator Light Description
- When the wireless speaker is turned on: Blue light flashing.
- When the wireless speaker is turned off: Blue light off.
- Pairing status: Blue light flashing.
- Connection successful: The blue light is constantly on.
- Charging: During charging, the red charging indicator light is constantly on. After being fully charged, the charging indicator light goes off.
Operating Instruction of Product
Power On (⏻)
Long press the power button for 2 seconds to turn on the device.
Shut Down (⏻)
Long press the power button for 3 seconds to turn it off.
Note: If the speaker is not paired with a Bluetooth device for 10 minutes after powering on, it will automatically shut down. If it exceeds the effective connection distance and does not connect, it will power off after 10 minutes.
Bluetooth Device Connection
- For the first time, through the Bluetooth device setting option, search for the Bluetooth pairing name "MINISO-M101" and tap to connect successfully.
- For reusing, the device will automatically connect to the Bluetooth device.
Note: Ensure Bluetooth is turned on on your Android device; the volume of the Bluetooth device is synchronized with the speaker.
Function Operation (Buttons ①, ②, ③, ④)
- Pause/Play: Click the multifunction button (NO.②) once.
- Volume reduction: Click "-" (NO.③) once.
- Volume increase: Click "+" (NO.④) once.
- Previous song: Long press the "-" (NO.③) for 3 seconds.
- Next song: Long press the "+" (NO.④) for 3 seconds.
- Call answering/ending: Click the multifunction button (NO.②) once.
- Call rejection: Long press the multifunction key (NO.②) for 2 seconds.
Mode switching
When no TF card or USB flash drive is inserted, the speaker defaults to Bluetooth mode after booting up. When a TF card or USB flash drive is inserted, it prioritizes entering TF card or USB flash drive mode to play songs after booting up. In TF card or USB mode, click the power button (⏻) to switch modes. Note: TF card and USB mode only support music in MP3 format and cannot use folders.
TWS Interconnection
When two devices of this model are turned on simultaneously, double-click the power button (⏻) to enter TWS interconnect mode. Double-click the power button (⏻) again to cancel the TWS interconnect mode. Note: To use this feature, two speakers of the same model are required.
To disconnect/connect Bluetooth: Press and hold the multifunction key (NO.②) for 2 seconds to disconnect Bluetooth. Press and hold the multifunction key (NO.②) again for 2 seconds to connect to Bluetooth.
03 Item list
The following items are included with the MINISO Wireless Speaker:
- Wireless Speaker *1
- Instruction *1 (represented by an icon of a small booklet)
- Charging cable *1 (represented by an icon of a USB charging cable)
FCC ID: 2BHJR-M101
FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
US Representative Information
Company name: REP America LLC
Address: 1942 Broadway St. STE 314C, Boulder, CO 80302, United States
Contact Person: Ben Xu
Email: d.zeng@rep-europe.de
Contact Phone: (719) 201-3314
04 Warranty Statement
MINISO product warranty card
Fields for warranty registration:
| Product number | SN number | |||
|---|---|---|---|---|
| User info | name | Purchase date | ||
| telephone | ||||
| address | ||||
| Invoice number | ||||
| Sales unit information | name | (stamp) | ||
| address | ||||
| telephone |
Warranty Policy
Disclaimer: This manual does not come with any form of warranty, position expression or other implication. The products, specifications and information mentioned in this manual are for reference only, and the content will be updated on the website at any time without prior notice.
Warranty statement: The following guarantee is made for the products attached to this document: If the product is damaged due to quality defects under normal use within twelve (12) months from the date of your purchase (the “Warranty Period”), and if it can be repaired, it will be repaired free of charge; If the manufacturer confirms that it cannot be repaired, it will be replaced free of charge; the repaired product will continue to be covered by the warranty for the remaining warranty period (a minimum of not less than 30 days). The purchase date shall be based on the sales invoice date; if the purchase date cannot be determined, the warranty period shall be calculated as thirteen (13) months from the product production date.
If you want to apply for warranty, please call the product service hotline first and follow our instructions. When applying for a warranty, you are required to provide a valid sales invoice that is accurate, complete and clearly filled out.
MINISO Product service policy
If you encounter a problem, please contact our customer service to solve it.
After-sales email: 7@hifi-earphone.com
Compliance marks: FC, RoHS, CE (described as regulatory compliance symbols).
Guidelines for safe and effective use
Note: Please read this information first before using your Bluetooth headset. If the user makes modifications or modifications to this Bluetooth headset without permission, the user will lose the right to continue to enjoy the services included in the device.
Electromagnetic interference:
Electronic devices: To avoid the effects of electromagnetic interference or configuration incompatibility, please turn off your Bluetooth device in accordance with regulations in places with clear instructions.
Civil Aviation: After boarding the plane, please turn off your Bluetooth headset according to the flight attendant's instructions. It is strictly prohibited to use Bluetooth headsets during flight to avoid interference with the aircraft communication system.
Safety matters:
Placement: It is recommended that when you are not using the Bluetooth headset, place it in a place where it will not be squeezed. Squeezing may cause damage to the product or personal injury.
Children: Do not let children play with Bluetooth headsets. Some of the small parts are detachable and may be swallowed and cause danger.
Important safety tips
- Except for the operation methods specifically marked in the manual, please do not attempt to disassemble or replace any parts in the product.
- This product contains a built-in rechargeable battery. It is prohibited to hit, squeeze, puncture, or short-circuit the battery. If there are abnormal phenomena such as excessive temperature, deformation, bulging, or leakage, please stop using it. Do not expose the battery to open flames or sunlight. Do not use the battery after it has been immersed in water or in high-temperature or high-pressure environments such as the sun, heaters, or stoves. After using the earphones, do not place the earphones in a humid, dusty, oily smoke, steam, direct sunlight, or other high-temperature and high-pressure environment to avoid damage to the earphones and battery. The battery can be charged and discharged for a limited number of times and will eventually age. If the battery is used abnormally, it can be replaced with a new one. However, do not replace the battery by yourself. If the battery is not replaced properly, there is a risk of explosion. It can only be replaced by an after-sales service provider of the same or equivalent type.
- After the product is used and scrapped, do not throw the product into a fire. The waste should be disposed of in strict accordance with the garbage classification. Please use this product reasonably and correctly to avoid causing certain injuries and environmental damage.
- During the use of headphones, due to long distances, obstacles in the middle, or a series of interferences such as other radio signals, Bluetooth signals, WIFI signals, etc., the headphones are used when listening to music, watching videos, playing games, etc., there will be occasional lags, voice out-of-sync or disconnection. If this happens, please reconnect the headphones or stay away from interference.
- When charging, please use a charging device with an output voltage of DC 5V/1A. You must choose a charging device from a regular manufacturer that has obtained CCC safety certification. Do not use a fast-charging charger to avoid excessive battery load, which may cause the battery to be damaged. Do not charge continuously for longer than the specified charging time. Do not use it while charging to avoid damage.
