Product and Accessories
The speaker unit features the following buttons and indicators:
- 1. Button: Long press for volume down, short press for previous track.
- 2. Button: Short press to pause/play music, long press to power off.
- 3. Button: Long press for volume up, short press for next track.
- 4. Charging Port: Micro USB, DC-5V power supply.
- 5. LED Indicator Light: Status indicator.
Included accessories:
- 6. USB Charging Cable: For charging the device.
Specifications
BT Version: V5.0
BT Pairing Name: LT-01
Function: BT connection
Input: DC5V, 1A
Built-in Battery: 3.7V lithium battery 1200mAh
Frequency Range: 160Hz-18kHz
Sensitivity: ≥85db/w/m
Rated Power/Largest Power: 3W*2
Charging Port: Micro USB
Transmission Distance: Around 10m
Music Time: About 2-4h
Charging Time: Around 2.5h
Standby Time: Around 30 days
Usage Instructions
1. Pairing
Long press button [2] ⚙️. The speaker will enter pairing mode, and the LED indicator light will flash blue and orange alternatively, with a "power on" prompt. Activate the Bluetooth function on your phone and search for "LT-01" to click for BT connection. The LED indicator light will stay orange upon completion of pairing, with a "successful connection" prompt. Note: This product supports auto-reconnecting function and may connect with the device connected the previous time after turned on.
2. Turning Off
When turned on, hold button [2] ⚙️ to turn it off, with a "power off" prompt.
3. Charging
Use the USB charging cable [6] ?. After connecting the charging cable with a compatible DC power adapter (DC5V, 1A), plug the other end of the cable into the charging port [4] of the product in order to charge it. The LED indicator light [5] will stay bright red during charging and dim out after fully charged.
Functions/Operation of Speaker
| Function | Operation |
|---|---|
| Play/Pause | Short press [2] button when music is on ▶️ |
| Next | Short press [3] button when music is on ⏭️ |
| Previous | Short press [1] button when music is on ⏮️ |
| Volume up | Hold [3] button when music is on ?⬆️ |
| Volume down | Hold [1] button when music is on ?⬇️ |
| Low power Prompt | Prompt will be heard when voltage reaches 3.2V. ? |
| Power off under Low power | Speaker will be power off upon a prompt when voltage reaches 3.0V. ?❌ |
| Power off upon Pairing time-out | Speaker will be power off if BT is not connected for More then 10 mins after turned on. ⏳❌ |
Environment Friendly Disposal
You can help protect the environment! ?
Correct Disposal of Product
This mark [recycle-bin] indicates the product should not be disposed of in the same way as other household wastes in EU regions. The product should be recycled to ensure sustainable reuse of resources and to prevent potential harm for the environment and human health caused by non-control of waste management. To recycle the used appliance, apply the recycling system or contact the franchiser to recycle the product according to the environmental protection requirements.
FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2AHW8LT01
