Owner's Manual for MightyJet models including: 8500 AIO Return Pump Mini Controllable DC, 8500, AIO Return Pump Mini Controllable DC, Mini Controllable DC, Controllable DC
5 days ago — PRESS: the button to activate feed mode. The display will read 'FE' and the pump will shut off and will automatically resume after 10 minutes.
How to Use the MightyJet Controller PRESS: the or button to increase or decrease the flow rate of the MightyJet Pump. TM AUQA GADGET TM AIO CONTROLLABLE PUMP PRESS AND HOLD: the button to toggle between STREAM Mode and SINE WAVE Mode. When the controller's display that reads a "1" You are in STREAM Mode. When the controller's display that reads a "2" You are in SINE WAVE Mode. PARTS #'s FOR 8500 | 8501| 8502 8500 Mini 1 MightyJet Motor 2 MightyJet Impeller 3 MightyJet Impeller Cover 4 MightyJet Front Cover 5 MightyJet Base 6 MightyJet Fittings 8501 DeskTop 1 MightyJet Motor 2 MightyJet Impeller 3 MightyJet Impeller Cover 4 MightyJet Front Cover 5 MightyJet Base 6 MightyJet Fittings 8502 MidSize 1 MightyJet Motor 2 MightyJet Impeller 3 MightyJet Impeller Cover 4 MightyJet Front Cover 5 MightyJet Base 6 MightyJet Fittings 850003 850005 850004 850006 850007 850008 850103 850105 850104 850106 850107 850108 850203 850205 850204 850206 850207 850208 WARNING AIO READY DC + - AIO RETURN PUMP MODE 1: STREAM The Stream Mode is a calm, uninterrupted constant movement of water at a single speed MODE 2: SINE WAVE The Sine Wave Mode is a smooth repetitive oscillation that moves water in a continuous wave motion. TM AUQA GADGET TM TM AUQA GADGET TM AIO CONTROLLABLE PUMP Each Mode has 9 speed settings that can be controlled using the buttons. 1.1 Being the minimum and 1.9 being maximum speed. After the speed has been set, a different number will show. This number is how much wattage is currently being used. Example: 30 = 30 Watts. AIO CONTROLLABLE PUMP Each Mode has 9 speed settings that can be controlled using the buttons. 2.1 Being the minimum and 2.9 being maximum speed. FEED MODE PRESS: the button to activate feed mode. The display will read `FE' and the pump will shut off and will automatically resume after 10 minutes. TM AUQA GADGET TM AIO CONTROLLABLE PUMP You can override the 10 minute timer by pressing the `FEED' button again and your pump will resume. LOCKING YOUR SETTINGS PRESS AND HOLD: the button to activate the "LOCK" function. The display will read "LC" and all buttons will be disabled. TM AUQA GADGET TM AIO CONTROLLABLE PUMP UNLOCKING YOUR SETTINGS PRESS AND HOLD: the button to deactivate the "LOCK" function. The display will no longer read "LC" and all buttons will be enabled.Adobe PDF library 16.04 Adobe Illustrator(R) 24.0