Walk Behind Edger
Model No. 58610—Serial No. 322000001 and Up
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part.
This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The 'a' represents the reference number of the entire service assembly and the 'b' represents a sequential number unique to each part within the service assembly.
For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The 'n' represents the quantity of the part, the 'X' is the multiplication symbol, and the 'y' represents the reference number.
For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.
Contents
- Chassis and Wheels Assembly - Page 4
- Engine Mount and Wheel Bearing Assembly - Page 6
- Cutting Head Assembly - Page 8
- Handles and Controls Assembly - Page 10
- Engine Assembly No. 147-4290 - Page 12
- Clutch Assembly - Page 14
Chassis and Wheels Assembly
Diagram of the chassis and wheels assembly, showing various components labeled with reference numbers.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 144-5022 | 4 | Nut-Hex |
| 2 | 144-4789 | 5 | Nut-Hex |
| 3 | 144-4784 | 1 | Screw-HHF |
| 4 | 144-5769 | 6 | Pin-Cotter |
| 5 | 144-5771 | 1 | Pivot-Height |
| 6 | 144-5773 | 1 | Axle-Front |
| 7 | 144-5776 | 1 | Spacer-Wheel |
| 8 | 144-5777 | 1 | Rod-Height |
| 9 | 144-5781 | 4 | Spacer-Axle |
| 10 | 144-5787 | 1 | Axle-Rear |
| 11 | 144-5793 | 1 | Holder |
| 12 | 144-5797 | 1 | Strap-Holder |
| 13 | 147-4250 | 1 | Screw-HSF |
| 14 | 144-5127 | 4 | Screw-RHF |
| 15 | 147-4262 | 2 | Wheel ASM, 175MM |
| 16 | 147-4263 | 2 | Wheel ASM, 205MM |
| 17 | 147-4264 | 1 | Bracket-Pivot |
| 18 | 147-4267 | 1 | Panel-Toro |
| 19 | 147-4271 | 3 | Screw-HSF |
| 20 | 144-4964 | 2 | Nut-Hex |
| 21 | 147-4290 | 1 | Engine-Toro |
| 22 | 147-4280 | 1 | Decal-Dash |
| 23 | 147-4283 | 1 | Decal-Warnings |
Engine Mount and Wheel Bearing Assembly
Diagram of the engine mount and wheel bearing assembly, showing various components labeled with reference numbers.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 144-5772 | 2 | Bearing-Wheel |
| 2 | 144-4789 | 6 | Nut-Hex |
| 3 | 144-4784 | 6 | Screw-HHF |
| 4 | 147-4254 | 1 | Frame-Left |
| 5 | 147-4255 | 1 | Frame-Right |
| 6 | 147-4256 | 1 | Engine Mount-Front |
| 7 | 147-4257 | 1 | Engine Mount-Rear |
Cutting Head Assembly
Diagram of the cutting head assembly, showing various components labeled with reference numbers.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 144-5022 | 2 | Nut-Hex |
| 2 | 144-4789 | 1 | Nut-Hex |
| 3 | 144-5769 | 2 | Pin-Cotter |
| 4 | 144-5770 | 2 | Bushing-Angle |
| 5 | 144-5774 | 2 | Bearing-Blade |
| 6 | 144-5779 | 2 | Blade Clamp |
| 7 | 144-5780 | 6 | Chain-Curtain |
| 8 | 144-5783 | 1 | Spring-Belt |
| 9 | 144-5784 | 1 | Spring-Angle |
| 10 | 144-5789 | 1 | Pulley |
| 11 | 144-5790 | 1 | Belt |
| 12 | 144-5791 | 1 | Washer-Wave |
| 13 | 144-5792 | 1 | Roll Pin |
| 14 | 144-5794 | 1 | Rod-Curtain |
| 15 | 144-5798 | 1 | Screw-HHCS |
| 16 | 144-5799 | 1 | Spacer-Blade |
| 17 | 144-4936 | 2 | Washer-Flat |
| 18 | 147-4252 | 2 | Screw-Hhfcs |
| 19 | 147-4253 | 1 | Blade |
| 20 | 147-4260 | 1 | Handle-Angle |
| 21 | 147-4261 | 1 | Guard-Belt |
| 22 | 147-4265 | 1 | Blade Arm |
| 23 | 147-4266 | 1 | Cutting Head |
| 24 | 147-4272 | 1 | Nut-Hex |
| 25 | 147-4284 | 1 | Decal-Guard |
| 26 | 147-4275 | 1 | Decal-Angle |
Handles and Controls Assembly
Diagram of the handles and controls assembly, showing various components labeled with reference numbers.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 144-5775 | 1 | Cable-Throttle |
| 2 | 144-5778 | 3 | Grip |
| 3 | 144-5796 | 1 | Trigger |
| 4 | 147-4268 | 1 | Handle Bar |
| 5 | 144-4808 | 1 | Screw-HHF |
| 6 | 144-5782 | 1 | Spring-Height |
| 7 | 147-4258 | 1 | Selector-Height |
| 8 | 147-4259 | 1 | Handle-Height |
| 9 | 144-4964 | 1 | Nut-Hex |
| 10 | 147-4282 | 1 | Decal-Throttle |
Engine Assembly No. 147-4290
Diagram of the engine assembly, showing various components labeled with reference numbers.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 144-5232 | 1 | Rod-Govenor |
| 2 | 144-5233 | 1 | Spring-Govenor |
| 3 | 144-5234 | 1 | Insulator-Block |
| 4 | 144-5104 | 2 | Screw-TMBS |
| 5 | 144-5235 | 2 | Gasket-Carburetor |
| 6 | 144-5236 | 1 | Gasket-Air Cleaner |
| 7 | 144-5237 | 1 | Starter Cup |
| 8 | 144-5238 | 1 | Blower |
| 9 | 144-5105 | 1 | Flywheel |
| 10 | 144-5106 | 1 | Key-Woodruff |
| 11 | 144-5239 | 1 | Cap-Fuel |
| 12 | 144-5240 | 1 | Gasket-Crankcase |
| 13 | 144-5241 | 1 | Washer-Flat |
| 14 | 144-5107 | 1 | Gasket-Exhaust |
| 15 | 144-5108 | 1 | Dipstick |
| 16 | 144-5242 | 1 | Deflector-Left |
| 17 | 144-5243 | 1 | Deflector-Right |
| 18 | 144-5112 | 2 | Seal-Oil |
| 19 | 144-5244 | 1 | Fuel Line |
| 20 | 144-5245 | 1 | Blower Housing |
| 21 | 144-5246 | 1 | Cover-Valve |
| 22 | 144-5247 | 1 | Gasket-Valve Cover |
| 23 | 144-5248 | 1 | Gasket-Head |
| 24 | 144-5249 | 1 | Spring-Throttle |
| 25 | 144-5750 | 2 | Clamp-Hose |
| 26 | 144-5118 | 5 | Screw-RHF |
| 27 | 144-5751 | 1 | Spark Plug |
| 28 | 144-5752 | 1 | Screw-T |
| 29 | 144-5753 | 1 | Control-Throttle |
| 30 | 144-4939 | 2 | Nut-Hex |
| 31 | 144-5127 | 2 | Screw-RHF |
| 32 | 144-5754 | 1 | Carburetor |
| 33 | 144-5130 | 1 | Cover-Air Cleaner |
| 34 | 144-5131 | 1 | Cap-Air Filter |
| 35 | 144-5132 | 1 | Base-Air Filter |
| 36 | 144-5133 | 1 | Plate-Air Filter |
| 37 | 144-5134 | 1 | Box-Air Filter |
| 38 | 144-5135 | 1 | Tube-Breather |
| 39 | 144-5136 | 1 | Arm-Governor |
| 40 | 144-5137 | 3 | Nut-Hex |
| 41 | 144-5755 | 1 | Tank-Fuel |
| 42 | 144-5756 | 1 | Strainer-Fuel |
| 43 | 144-5140 | 1 | Recoil |
| 44 | 144-5757 | 1 | Sleeve-Fuel Line |
| 45 | 144-5758 | 1 | Muffler |
| 46 | 144-5759 | 1 | Filter-Fuel |
| 47 | 144-5760 | 1 | Coil |
| 48 | 144-5761 | 1 | Pin-Governor |
| 49 | 144-5762 | 1 | Seal-Governor |
| 50 | 144-5763 | 1 | Washer-Flat |
| 51 | 144-5764 | 1 | Screw-HHF |
| 52 | 144-5765 | 10 | Screw-RHF |
| 53 | 144-5141 | 1 | Nut-Hex |
| 54 | 144-5766 | 1 | Screw-RHF |
| 55 | 144-5767 | 1 | Switch-Rotary |
| 56 | 147-4281 | 1 | Decal-Start |
Clutch Assembly
Diagram of the clutch assembly, showing various components labeled with reference numbers.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 144-4880 | 4 | Screw-HHCS |
| 2 | 144-5768 | 1 | Washer-Flat |
| 3 | 144-5785 | 1 | Clutch |
| 4 | 144-4919 | 1 | Screw-HHCS |
| 5 | 144-5786 | 1 | Shield-Clutch |
| 6 | 144-4922 | 2 | Cage Nut |
| 7 | 144-5788 | 1 | Bracket- Clutch Shield |
| 8 | 144-5795 | 1 | Spacer-Clutch |
| 9 | 147-4251 | 1 | Washer-Flat |
| 10 | 144-4955 | 2 | Screw-HHF |
| 11 | 147-4269 | 1 | Key |
| 12 | 147-4270 | 3 | Screw-HHF |
Lawn Mowers, Golf Equipment, Landscape Equipment, Irrigation | Toro
