Toro TimeCutter® Max 50in Zero Turn Riding Mower
Model No. 77505—Serial No. 400000000 and Up
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part. This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The 'a' represents the reference number of the entire service assembly and the 'b' represents a sequential number unique to each part within the service assembly. For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The 'n' represents the quantity of the part, the 'X' is the multiplication symbol, and the 'y' represents the reference number. For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.
Contents
- Frame Assembly
- Decklift Assembly
- Caster Wheel Assembly
- Traction Drive Assembly
- LH Transaxle Assembly No. 139-7470
- RH Transaxle Assembly No. 139-7471
- Brake Assembly
- Tire Assembly
- Seat Pan Assembly
- Motion Control Assembly
- Engine and Muffler Assembly
- Fuel Pod Assembly
- Electrical Assembly
- 50in Deck and Decal Assembly
- Model Specific Assembly
- Clutch Assembly
- Attachments and Accessories
Frame Assembly
Diagram Description: An exploded view of the mower's frame, showing various mounting points, brackets, and supports. Key components include the main frame rails, front and rear mounting plates, engine mounts, and various brackets for other assemblies.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 147-8723 | 1 | Service ASM-Frame, Tc |
| 2 | 145-6283-01 | 1 | Wa-Battery Mount |
| 3 | 145-6306-01 | 1 | Mount-Drive, LH |
| 4 | 145-6307-01 | 1 | Mount-Drive, RH |
| 5 | 147-8709-03 | 1 | Plate-Mount |
| 6 | 147-2966-03 | 1 | Footrest-Top |
| 7 | 147-2995-01 | 1 | Plate-Rear Cladding Tc |
| 8 | 147-2994-03 | 1 | Guard-Engine Tc |
| 9 | 99-4693 | 1 | Decal |
| 10 | 161-6207 | 2 | Decal-Bypass |
| 11 | 142-5864 | 1 | Decal-Spark Arrester |
| 12 | 144-5288 | 1 | Decal-Warning |
| 13 | 32144-70 | 9 | Screw-HWHTF |
| 14 | 138-9753 | 18 | Screw |
| 15 | 117-1232-03 | 1 | Bracket-Hitch |
| 16 | 139-2596 | 2 | Screw-HHF |
| 17 | 119-4041 | 12 | Nut-HF |
| 18 | 145-6315-03 | 1 | Support-Seat |
| 19 | 138-2548 | 2 | Spring-Compression |
| 20 | 701178 | 2 | Cap-Protector |
| 21 | 145-6368-01 | 1 | Plate-Kick |
| 22 | 145-6370-01 | 1 | Pan-Floor |
| 27 | 147-7717-03 | 1 | Guard-Muffler [black] |
| 28 | 139-2598 | 4 | Screw-HHF |
| 30 | 147-8716-05 | 1 | Plate-Toeboard |
| 31 | 130-8451 | 2 | Rivet-Trifold |
Decklift Assembly
Diagram Description: An exploded view illustrating the components of the decklift mechanism, including pivot points, lift arms, springs, and fasteners.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 139-5872 | 4 | Bearing-Flange |
| 2 | 145-6257-01 | 1 | Bracket-HOC |
| 3 | 145-4645-01 | 2 | Pivot ASM-Decklift [red] |
| 4 | 138-7204 | 4 | Gusset-Deck Lift |
| 5 | 145-0557-01 | 1 | Link ASM-HOC [red] |
| 6 | 119-4061 | 2 | Screw-HHF |
| 7 | 139-2428 | 2 | Screw-HWH |
| 8 | 147-2866 | 1 | Decal-HOC, Tc |
| 9 | 140-2146 | 1 | HOC Pin ASM |
| 10 | 145-6278-01 | 1 | Pedal ASM [red] |
| 11 | 138-7205 | 4 | Chain-Decklift, 4-Link |
| 12 | 138-7207 | 4 | Spacer-Hub, Blower |
| 13 | 130-0742 | 6 | Bolt-Shoulder |
| 14 | 145-6248-03 | 1 | Pan-Deck Pivot |
| 15 | 145-6288 | 1 | Pin-Deck |
| 16 | 139-2611 | 1 | Washer-Flat |
| 17 | 139-2562 | 1 | Pin-Hair |
| 18 | 32144-70 | 8 | Screw-HWHTF |
| 19 | 119-4042 | 8 | Nut-HF, NI |
| 20 | 138-7206 | 1 | Spring-Extension |
| 21 | 140-2093 | 2 | Spacer |
Caster Wheel Assembly
Diagram Description: An illustration of the caster wheel assembly, showing the wheel, fork, bearings, and axle components.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 109-3678 | 4 | Bearing-Ball |
| 2 | 144-0375 | 2 | Cap, Grease |
| 3 | 145-4674-01 | 2 | Fork ASM [red] |
| 4 | 145-4692 | 2 | Wheel ASM - Caster 12X6-5 |
| 4:1 | 145-4672 | 1 | Tire 12X6-5 |
| 4:2 | 145-4673 | 1 | Wheel (W/ Zerk And Bushings) |
| 4:3 | 232-27 | 1 | Stem-Valve |
| 4:4 | 114-1640 | 2 | Bushing-Flange |
| 5 | 145-4649 | 2 | Screw-Shoulder HHF |
| 6 | 99-5107 | 2 | Nut-Lock |
| 10 | 115-1151 | 2 | Washer-Flat |
| 11 | 139-2598 | 2 | Screw-HHF |
Traction Drive Assembly
Diagram Description: An exploded view of the traction drive system, detailing the transaxle components, pulleys, belt, and related hardware.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 139-7470 | 1 | LH Hydro Transaxle ASM |
| 2 | 139-7471 | 1 | RH Hydro Transaxle ASM |
| 3 | 147-2988 | 1 | Rod-Bypass, LH |
| 4 | 147-2989 | 1 | Rod-Bypass, RH |
| 5 | 119-8952 | 2 | Washer |
| 6 | 3290-307 | 2 | Pin-Cotter |
| 7 | 145-6390-03 | 1 | Plate-Cross Hydro |
| 8 | 145-6361 | 1 | V-Belt (A Sec 63.8 EI) |
| 9 | 138-7597 | 1 | Pulley-Idler, Flat |
| 10 | 68-0030 | 1 | Idler |
| 11 | 147-2925 | 1 | Arm-Idler |
| 12 | 138-7277 | 1 | Spacer-Arm, Idler |
| 13 | 138-9809 | 1 | Spacer |
| 14 | 5-4460 | 1 | Washer-Pivot |
| 15 | 137-7040 | 1 | Spring-Return, Pedal |
| 16 | 104-8300 | 8 | Nut-HF, NI |
| 17 | 322-11 | 2 | Screw-HH |
| 18 | 145-6388 | 2 | Screw-HH Spcl |
| 19 | 139-2574 | 2 | Nut-HF |
| 20 | 138-7590 | 4 | Screw-HHF |
| 21 | 115-1794 | 1 | Screw-HHF |
| 22 | 3230-8 | 1 | Screw-CARR |
| 23 | 242-50 | 8 | Nut-Lug |
| 24 | 324-10 | 4 | Screw-HH |
| 25 | 324-8 | 2 | Screw-HH |
| 26 | 114-8417 | 6 | Nut-HF, NI |
LH Transaxle Assembly No. 139-7470
Diagram Description: Detailed exploded view of the left-hand transaxle, showing internal gears, shafts, bearings, seals, and housing components.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 106-8695 | 1 | Main Housing ASM |
| 2 | 106-8696 | 1 | Side ASM |
| 4 | 110-8561 | 1 | Pump Block ASM |
| 6 | 103-2666 | 1 | Cylinder Block Kit |
| 7 | 104-2189 | 1 | Plug-Thread, Straight |
| 9 | 117-5359 | 16 | Screw-HHF |
| 14 | 106-8677 | 2 | Ring-Retaining, External |
| 15 | 106-8678 | 1 | Rod-Bypass |
| 16 | 106-8679 | 1 | Ring-Retaining, Internal |
| 19 | 104-5304 | 1 | Swashplate-Trunnion |
| 21 | 104-2116 | 1 | Stud |
| 22 | 112-9853 | 1 | Puck-Friction |
| 27 | 94-1936 | 1 | Spring-Block |
| 28 | 94-1937 | 1 | Washer-Thrust |
| 29 | 104-5306 | 1 | Shaft-Input |
| 30 | 104-5311 | 1 | Bearing-Ball |
| 31 | 104-5307 | 1 | Ring-Retaining |
| 32 | 104-5308 | 1 | Spacer |
| 33 | 104-5310 | 1 | Seal-Lip |
| 34 | 104-5309 | 2 | Ring-Retaining |
| 35 | 94-6922 | 2 | Bearing-Thrust |
| 36 | 104-5339 | 1 | Washer-Flat |
| 37 | 104-5340 | 1 | Ring-Retaining |
| 38 | 132-0912 | 1 | Gear-12T |
| 39 | 106-8683 | 1 | Shaft-Motor |
| 40 | 104-5360 | 1 | Washer |
| 41 | 94-1933 | 2 | Washer |
| 42 | 132-0911 | 1 | Gear-49T |
| 43 | 104-5318 | 1 | Gear-Jackshaft, 10T |
| 44 | 104-5329 | 1 | Pin-Jackshaft |
| 45 | 112-9854 | 1 | Ring-Spiral, Retaining |
| 46 | 112-9855 | 1 | Gear-52T, Bull |
| 47 | 112-9856 | 1 | Washer |
| 48 | 112-9857 | 1 | Bearing-Sleeve |
| 49 | 120-7104 | 1 | Shaft-Axle |
| 50 | 112-9859 | 1 | Bushing-Axle |
| 51 | 112-9860 | 1 | Seal-Lip |
| 52 | 106-8686 | 1 | Seal Kit |
| 53 | 106-8697 | 1 | Expansion Plate Kit |
| 54 | 135-7349 | 1 | Fan And Pulley Kit |
| 55 | 106-8688 | 1 | Brake Arm Kit |
| 57 | 112-9861 | 1 | Center Section Filter Kit |
| 59 | 120-5549 | 1 | Bypass Kit |
| 61 | 114-1634 | 1 | Filter Kit |
| 98 | 120-7109 | 1 | Tube-Axle |
| 100 | 106-8694 | 1 | Disc-Brake, Cog |
| 101 | 115-5057 | 1 | Cover-Nut, Axle |
| 124 | 109-5939 | 1 | Hub Kit |
| 138 | 112-9866 | 1 | Breather Kit |
| 139 | 114-1635 | 1 | Breather ASM |
| 200 | 117-5362 | 1 | Control Arm Kit |
| 209 | 114-8467 | 1 | Puller-Hub, 4 Bolt |
RH Transaxle Assembly No. 139-7471
Diagram Description: Detailed exploded view of the right-hand transaxle, showing internal gears, shafts, bearings, seals, and housing components. This assembly is similar to the LH transaxle but mirrored.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 106-8674 | 1 | Main Housing ASM |
| 2 | 106-8675 | 1 | Side ASM |
| 4 | 110-8561 | 1 | Pump Block ASM |
| 6 | 103-2666 | 1 | Cylinder Block Kit |
| 7 | 104-2189 | 1 | Plug-Thread, Straight |
| 9 | 117-5359 | 16 | Screw-HHF |
| 14 | 106-8677 | 2 | Ring-Retaining, External |
| 15 | 106-8678 | 1 | Rod-Bypass |
| 16 | 106-8679 | 1 | Ring-Retaining, Internal |
| 19 | 104-5304 | 1 | Swashplate-Trunnion |
| 21 | 104-2116 | 1 | Stud |
| 22 | 112-9853 | 1 | Puck-Friction |
| 27 | 94-1936 | 1 | Spring-Block |
| 28 | 94-1937 | 1 | Washer-Thrust |
| 29 | 104-5306 | 1 | Shaft-Input |
| 30 | 104-5311 | 1 | Bearing-Ball |
| 31 | 104-5307 | 1 | Ring-Retaining |
| 32 | 104-5308 | 1 | Spacer |
| 33 | 104-5310 | 1 | Seal-Lip |
| 34 | 104-5309 | 2 | Ring-Retaining |
| 35 | 94-6922 | 2 | Bearing-Thrust |
| 36 | 104-5339 | 1 | Washer-Flat |
| 37 | 104-5340 | 1 | Ring-Retaining |
| 38 | 132-0912 | 1 | Gear-12T |
| 39 | 106-8683 | 1 | Shaft-Motor |
| 40 | 104-5360 | 1 | Washer |
| 41 | 94-1933 | 2 | Washer |
| 42 | 132-0911 | 1 | Gear-49T |
| 43 | 104-5318 | 1 | Gear-Jackshaft, 10T |
| 44 | 104-5329 | 1 | Pin-Jackshaft |
| 45 | 112-9854 | 1 | Ring-Spiral, Retaining |
| 46 | 112-9855 | 1 | Gear-52T, Bull |
| 47 | 112-9856 | 1 | Washer |
| 48 | 112-9857 | 1 | Bearing-Sleeve |
| 49 | 120-7104 | 1 | Shaft-Axle |
| 50 | 112-9859 | 1 | Bushing-Axle |
| 51 | 112-9860 | 1 | Seal-Lip |
| 52 | 106-8686 | 1 | Seal Kit |
| 53 | 106-8687 | 1 | Expansion Plate Kit |
| 54 | 135-7349 | 1 | Fan And Pulley Kit |
| 55 | 106-8688 | 1 | Brake Arm Kit |
| 57 | 112-9862 | 1 | Center Section Filter Kit |
| 59 | 107-2489 | 1 | Bypass Arm Kit |
| 61 | 114-1634 | 1 | Filter Kit |
| 98 | 120-7109 | 1 | Tube-Axle |
| 100 | 106-8694 | 1 | Disc-Brake, Cog |
| 101 | 115-5057 | 1 | Cover-Nut, Axle |
| 124 | 109-5939 | 1 | Hub Kit |
| 138 | 112-9866 | 1 | Breather Kit |
| 139 | 114-1635 | 1 | Breather ASM |
| 200 | 117-5362 | 1 | Control Arm Kit |
| 209 | 114-8467 | 1 | Puller-Hub, 4 Bolt |
Brake Assembly
Diagram Description: An illustration of the mower's brake system, showing the brake rods, links, clips, and springs.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 144-1858 | 2 | Bellcrank |
| 2 | 145-6364 | 2 | Bolt - Shoulder |
| 3 | 145-4607 | 1 | Link-Brake, LH |
| 4 | 145-6238 | 1 | Link-Brake, RH |
| 5 | 119-8952 | 6 | Washer |
| 6 | 120-9716 | 2 | Pin-Cotter |
| 7 | 144-1816 | 1 | Clip, Rod, LH, 7L, 1/4In |
| 8 | 144-1815 | 1 | Clip, Rod, RH, 7R, 1/4In |
| 9 | 144-1860 | 1 | Rod-Brake, LH |
| 10 | 144-1851 | 1 | Rod-Brake, RH |
| 11 | 117-1169 | 4 | Spring-Compression |
| 12 | 3296-42 | 2 | Nut-Lock, NI |
Tire Assembly
Diagram Description: Illustration of the mower tire and rim assembly, showing the tire, rim, valve stem, and related components.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 145-6391 | 2 | Tire ASM |
| 1:1 | 147-5180 | 1 | Rim |
| 1:2 | 147-5179 | 1 | Tire |
| 1:3 | 232-27 | 1 | Stem-Valve |
Seat Pan Assembly
Diagram Description: An illustration of the seat pan and seat assembly, including the seat itself, mounting hardware, and associated components.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 147-3002-03 | 1 | Pan-Seat |
| 2 | 147-5169 | 1 | Rod-Pivot |
| 3 | 147-5175 | 2 | Screw-Tbh, Thd Roll |
| 4 | 161-4452 | 1 | Cable-Lanyard, 26.75" |
| 5 | 135-2015 | 1 | Screw-Shoulder |
| 6 | 147-5287 | 1 | Washer-Flat |
| 7 | 147-8732 | 1 | Seat ASM - Seat King Sk130 |
| 7:2 | 147-8752 | 1 | Cover-Seat |
| 7:3 | 82-2190 | 1 | Switch-Bail |
| 8 | 1-603716 | 2 | Washer-Friction |
| 9 | 139-2401 | 2 | Knob |
| 10 | 147-5174 | 2 | Bolt-Shoulder, Hfh |
Motion Control Assembly
Diagram Description: An illustration of the mower's motion control system, including control levers, linkages, pivot points, and associated hardware.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 145-4615-03 | 1 | Control Box - LH G7 |
| 2 | 145-4647-03 | 1 | Control Box - RH G7 |
| 3 | 147-7580-03 | 2 | Adjustment Plate-Control Box |
| 4 | 145-6253 | 2 | Spring-Torsion |
| 5 | 138-9753 | 4 | Screw |
| 6 | 145-4648 | 2 | Pivot Arm ASM |
| 6:2 | 256-156 | 2 | Bushing-Flange |
| 7 | 115-5099 | 2 | Bolt-Pivot |
| 8 | 120-2273 | 2 | Washer-Nylon |
| 9 | 147-5191-05 | 2 | Arm-Control, 32 Teeth |
| 10 | 142-8478 | 2 | Spacer, Anti-Rotation |
| 11 | 119-8925 | 2 | Washer-Belleville |
| 12 | 132-6853 | 2 | Damper-Non Cavitating |
| 13 | 120-7950 | 6 | Screw-Torx |
| 14 | 145-4699 | 2 | Rod - Hydro, LH |
| 15 | 138-7252 | 2 | Spring-Compression |
| 16 | 147-5192-05 | 2 | Disc-Adjustment Handle, 32 Teeth |
| 17 | 145-6327 | 2 | Handle-Control, Box |
| 17:2 | 147-3029 | 1 | Grip |
| 18 | 145-6366 | 2 | Screw-Handle |
| 19 | 137-3008 | 2 | Screw-Handle |
| 20 | 117-5976 | 2 | Knob-Handle |
| 21 | 112-3306 | 2 | Nut |
| 22 | 126-4299 | 2 | Screw-HSBH |
| 23 | 119-8952 | 4 | Washer |
| 24 | 120-9683 | 2 | Washer-Plain |
| 25 | 138-7218 | 2 | Mount-Rod, Hydro |
| 26 | 120-9738 | 4 | Screw-HH |
| 27 | 138-8401 | 4 | Nut-HF |
| 28 | 117-1198 | 2 | Bolt-Pivot |
| 29 | 104-8300 | 8 | Nut-HF, NI |
| 30 | 104-8301 | 4 | Nut-HF, NI |
Engine and Muffler Assembly
Diagram Description: An illustration showing the engine and muffler components, including mounting bolts and gaskets.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | (Engine) | 1 | Engine - B&s Exi |
| 1:1 | 147-5158 | 2 | Gasket-Exhaust, Briggs Twin |
| 2 | 145-6318 | 1 | Muffler |
| 3 | 33004-00 | 4 | Nut-HF |
| 5 | 115-1166 | 3 | Washer-Plain |
| 6 | 139-2576 | 4 | Screw-HWH |
| 9 | 147-5158 | 2 | Gasket-Exhaust, Briggs Twin |
| 10 | 161-6221-03 | 1 | Heat Shield - Muffler |
| 11 | 138-9753 | 2 | Screw |
Fuel Pod Assembly
Diagram Description: An illustration of the fuel pod assembly, including the fuel tank, filler neck, cap, and associated hoses and fittings.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 145-6304 | 1 | Tank-Fuel ASM |
| 1:2 | 46-6560 | 2 | Bushing |
| 1:3 | 144-5302 | 1 | Fitting-Elbow 90 |
| 1:4 | 147-2934 | 1 | Fitting - Pickup, Fuel |
| 2 | 147-7657 | 1 | Neck-Filler, Fuel |
| 3 | 137-4119 | 1 | Cap-Fuel, Ratcheting |
| 4 | 145-4698 | 1 | Hose-Filler, Fuel |
| 5 | 2412-130 | 2 | Clamp-Hose |
| 6 | 147-2973-01 | 1 | Cast-Tube, RH [red] |
| 7 | 147-2972-01 | 1 | Cast-Tube, LH [red] |
| 8 | 147-2974-03 | 1 | Mount-Pod Bracket LH |
| 9 | 120-7950 | 10 | Screw-Torx |
| 10 | 32144-70 | 6 | Screw-HWHTF |
| 11 | 147-8741 | 1 | Pod ASM - LH W/Decals |
| 11:2 | 139-2395 | 1 | Decal-Control Lever, LH |
| 11:3 | 147-2399 | 1 | Decal-Fuel Fill |
| 12 | 32144-41 | 4 | Screw-Taptite |
| 14 | 147-5176 | 1 | Rod-Hold Down |
| 15 | 32144-4 | 2 | Screw-HWH |
| 16 | 147-2978 | 1 | Fender-Time Cutter, LH |
| 17 | 147-2979 | 1 | Fender-Time Cutter, RH |
| 18 | 147-2976-03 | 1 | Bracket-Rear Pod, LH |
| 19 | 138-9753 | 4 | Screw |
| 20 | 2412-80 | 1 | Clamp-Hose |
| 21 | 2412-98 | 2 | Clamp-Hose |
| 22 | 147-2975-03 | 1 | Mount-Pod Bracket RH |
| 23 | 147-5170-03 | 1 | Plate-Kick |
| 24 | 147-2977-03 | 1 | Mount-Pod Bracket RH |
| 25 | 147-8742 | 1 | Pod ASM - RH W/Decals |
| 25:2 | 139-2394 | 1 | Decal-Control Lever, RH |
| 27 | 107069 | 1 | Clip |
| 28 | 147-2990-03 | 1 | Panel-Control |
| 30 | 32105-15 | 1 | Screw-HWH |
| 32 | 110-3254 | 1 | Hose-Fuel |
| 33 | 109-0284 | 1 | Hose-Fuel |
| 34 | 32180-030 | 2 | Clip-Tie |
| 35 | 144-1983 | 1 | Adapter Orifice |
| 36 | 115-4735 | 1 | Hose-Fuel |
| 38 | 139-2403 | 1 | Cable-Throttle |
| 39 | 139-2402 | 1 | Cable-Choke |
| 43 | 147-7712 | 1 | Ring-Retaining |
| 45 | 161-4609-03 | 1 | Bracket-Alignment, Pod LH |
| 46 | 161-4610-03 | 1 | Bracket-Alignment, Pod RH |
Electrical Assembly
Diagram Description: An illustration of the mower's electrical system, including the wiring harness, battery, solenoid, switches, and related components.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 145-6382 | 1 | Harness-Wire, Main |
| 1:7 | 109355 | 1 | Fuse-Blade, 15 Amp |
| 1:8 | 109102 | 1 | Fuse-Blade, 25 Amp |
| 1:9 | 32180-435 | 1 | Cap-Over Mold, 1M/1F |
| 1:10 | 100-4918 | 1 | Diode |
| 1:11 | 32180-047 | 3 | Clip-Tubing, Harness |
| 2 | 140-2076 | 1 | Battery - Wet |
| 3 | 117-1197 | 1 | Solenoid |
| 4 | 110-6765 | 2 | Switch |
| 5 | 137-4100 | 1 | Switch-Ignition |
| 7 | 139-6368 | 1 | Switch-Rocker, On-None-On |
| 8 | 1-643275 | 1 | Relay |
| 9 | 140-2080 | 1 | Cover-Solenoid |
| 10 | 140-2081 | 1 | Cap-Solenoid |
| 11 | 104-2466 | 1 | Holddown-Battery |
| 12 | 147-2941 | 1 | Cable-Battery,Red |
| 13 | 119-8899 | 1 | Cable-Battery, Black |
| 14 | 121-0711 | 1 | Cable-Battery, Positive |
| 15 | 32144-4 | 3 | Screw-HWH |
| 16 | 3256-22 | 2 | Washer-Flat |
| 17 | 321-3 | 1 | Screw-HH |
| 18 | 3229-1 | 1 | Screw-CARR |
| 19 | 32128-33 | 2 | Nut-HF |
| 20 | 32103-22 | 1 | Nut-Wing |
| 21 | 3220-2 | 2 | Nut-Jam |
| 22 | 139-1713 | 1 | Screw-Thd Roll |
50in Deck and Decal Assembly
Diagram Description: An illustration of the 50-inch mower deck and associated decals, including blades, pulleys, belts, and mounting hardware.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 147-8745 | 1 | 50 In Deck & Decal ASM |
| 1:3 | 130-0731 | 1 | Decal-Danger |
| 1:4 | 132-0872 | 2 | Decal-Danger, Deck |
| 1:5 | 99-3943 | 1 | Decal-Routing, Belt |
| 1:7 | 112-9840 | 1 | Decal-Scalp, Anti |
| 7 | 139-2448-03 | 1 | Baffle-Corner |
| 8 | 138-9753 | 2 | Screw |
| 9 | 139-3214 | 3 | Spindle ASM |
| 9:2 | 120-7935 | 2 | Spacer |
| 9:3 | 138-9770 | 2 | Bearing-Ball |
| 10 | 139-3272-03 | 2 | Bracket-Cover, Belt |
| 11 | 32144-41 | 12 | Screw-Taptite |
| 12 | 117-7268 | 3 | Shaft-Spindle |
| 13 | 139-7454 | 3 | Pulley |
| 14 | 132-9420 | 3 | Pulley-Idler, Flat |
| 15 | 115-4986 | 1 | Spacer |
| 16 | 114-0463 | 2 | Washer-Friction, Composite |
| 17 | 144-1906 | 2 | Cover-Belt |
| 18 | 94-6961 | 2 | Screw |
| 19 | 115-5059-03 | 3 | Blade-Hi Lift |
| 20 | 138-7262 | 1 | Arm-Idler |
| 21 | 138-7207 | 1 | Spacer-Hub, Blower |
| 22 | 138-7270 | 1 | Guide-Belt, Idler |
| 23 | 147-2909 | 1 | V Belt (A Sec 142.06 EI) |
| 24 | 137-2019 | 1 | Rod-Pivot |
| 25 | 138-7502 | 1 | Deflector-Discharge |
| 26 | 138-7268 | 1 | Spring-Torsion |
| 27 | 138-9800-03 | 1 | Baffle-Cutoff |
| 28 | 1-603299 | 3 | Roller-Scalp, Anti |
| 29 | 133-9289 | 2 | Fitting-Washout |
| 29:2 | 133-9290 | 1 | O-Ring |
| 30 | 145-0411 | 3 | Bolt-Blade, Sems |
| 31 | 95-3270 | 1 | Connector-Hose |
| 32 | 138-7266 | 1 | Spring-Return, Hook |
| 33 | 138-7264 | 1 | Spring-Extension |
| 34 | 32144-4 | 4 | Screw-HWH |
| 35 | 3256-24 | 2 | Washer-Plain |
| 36 | 323-9 | 3 | Screw-HH |
| 37 | 110-9981 | 1 | Washer-Plain |
| 38 | 63-7400 | 2 | Washer-Rebound |
| 39 | 3219-6 | 3 | Nut-Hex |
| 40 | 323-11 | 1 | Screw-HH |
| 41 | 104-8301 | 5 | Nut-HF, NI |
| 42 | 112-3977 | 3 | Bolt-Shoulder |
| 43 | 3296-59 | 1 | Nut-Lock, NI |
| 44 | 144-1944 | 2 | Pin-Hair |
Model Specific Assembly
Diagram Description: Illustrations showing decals and other model-specific components for the TimeCutter Max.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 4 | 147-7573 | 1 | Decal-Max |
| 5 | 147-7561 | 1 | Decal-Timecutter |
| 6 | 147-7560 | 2 | Decal-Timecutter |
| 8 | 147-8753 | 1 | Decal - Control Panel W/Out Hour Meter |
| 9 | 63-8360 | 1 | Key-Ignition |
Clutch Assembly
Diagram Description: An illustration of the mower's clutch assembly, showing the pulley, clutch mechanism, and mounting hardware.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 138-9792 | 1 | Pulley-Engine |
| 2 | 137-7000 | 1 | Stop-Clutch (Wide) |
| 3 | 120-2217 | 1 | Isolator-Clutch |
| 4 | 127-3410 | 1 | Clutch-PTO |
| 5 | 3234-42 | 1 | Screw-HHF |
| 6 | 104-8301 | 1 | Nut-HF, NI |
| 7 | 112843 | 1 | Washer |
| 8 | 3212-19 | 1 | Screw-HH |
Attachments and Accessories
For 77505 TimeCutter Max 50in Zero Turn Riding Mower
| Product Name | Model/Part |
|---|---|
| Jack Kit | 127-6666 |
| 4-Cycle Fuel, Snow And Lawn 32oz Can | 131-3823 |
| Toro Premium Fuel Treatment 12oz Bottle | 131-6572 |
| Oil-30/10W-30 Synthetic (Quart) | 138-6053 |
| 50 Inch Recycler Kit | 139-3240 |
| 50 Inch Bagging Enhancement Kit | 139-7459 |
| Led Light Kit | 147-8757 |
| Floormat Kit | 147-8765 |
| Kit-Caster Wheel | 147-8772 |
| Arm Rest Kit | 147-8774 |
| Kit-Striping, 50" | 147-8779 |
| Kit, Hour Meter | 147-8791 |
| Mount, Jack TC | 147-8836 |
| Assist Bar Kit | 161-4450 |
| Transport Lock Kit | 161-4510 |
| 10W30 4-Cycle Engine Oil (32oz Bottle) | 38280 |
| Toro 4-Cycle SAE 30 Oil (32oz Bottle) | 38903 |
| Toro Deluxe Rider Cover | 490-7319 |
| Belt-Deck, 50 TCSS | 79006 |
| Blade Kit | 79016P |
| ROPS Kit | 79487 |
| Kit-Slope Sensor | 79489 |
| Residential Z Max 50in Bagger | 79501 |
Lawn Mowers, Golf Equipment, Landscape Equipment, Irrigation | Toro
