TRU Components DIN Rail Power Supply - Safety and Technical Data
Product Information
This document provides safety instructions and technical data for TRU Components DIN Rail Power Supplies.
Model Numbers:
- 2645198 (DPN-24120)
- 2645199 (DPS-24120)
- 2645200 (DPH-12015)
- 2645201 (DPH-24015)
- 2645202 (DPH-12024)
- 2645203 (DPH-24030)
- 2645204 (DPH-12054)
- 2645205 (DPH-24060)
- 3427719 (TC-YSD60S-0504500)
- 3427721 (TC-YSD100S-1207100)
- 3427722 (TC-YSD100S-2403830)
- 3427723 (TC-YSD150S-12)
- 3427724 (TC-YSD150S-24)
- 3428340 (TC-YSD15S-0502400)
- 3428341 (TC-YSD15S-2400625)
- 3428342 (TC-YSD30S-0503000)
Downloads: Datasheets and operating instructions can be downloaded from www.conrad.com/downloads.
Intended Use
This product is designed as a DIN rail power supply unit to convert AC input voltage to a stable DC output. It is intended for indoor use only and must be protected from moisture.
Symbol Explanation
- !: Warns of hazards that can lead to personal injury.
- : Warns of dangerous voltage that can lead to personal injury by electric shock.
- : Product must only be used in dry, enclosed indoor areas. It must not become damp or wet.
- : Warns of hot surfaces that can result in severe burns when touched.
- : Protection class 2 (double or reinforced insulation, protective insulation).
- UK: Product is UK conformity assessed and meets applicable Great Britain directives.
- Safety isolating transformer: Safety isolating transformer.
- Power supply unit, switch mode: Switching power supply unit is installed in the product.
- LPS: Limited power source. Power adapter is designed to provide maximum output voltage, current, and power.
- IP20: Ingress protection rating. Protected against solid objects up to 12 mm. Not protected against water.
Safety Instructions
General
- Keep out of reach of children and pets.
- Do not leave packaging material lying around carelessly.
- For questions not answered in this document, contact technical support.
- Maintenance, modifications, and repairs must only be completed by a qualified technician.
Handling
- Handle the product carefully. Avoid jolts, impacts, or drops.
Operating Environment
- Do not place the product under mechanical stress.
- Protect from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
- Protect from high humidity and moisture.
- Protect from direct sunlight.
Operation
- Consult an expert if you have doubts about operation, safety, or connection.
- If safe operation is no longer possible, take the product out of operation and protect it from accidental use. DO NOT attempt to repair the product yourself. Safe operation is not guaranteed if the product is visibly damaged, not working properly, stored in poor conditions, or subjected to serious transport stresses.
Electrical Installation
WARNING! Safety hazard! Installation and connection must only be performed by individuals with relevant electrical knowledge and experience. Improper installation risks personal injury, damage to property, and personal liability. Always consult an electrician.
Required Specialist Knowledge:
- Understanding of the "Five safety rules": Disconnect from mains, prevent accidental switch-on, ensure no voltage, earth and short-circuit, cover adjacent live parts.
- Use of suitable tools, measuring devices, and personal protective equipment.
- Analysis of measurement results.
- Use of electrical installation materials for safe disconnection.
- Understanding of IP protection ratings.
- Installation of electrical installation materials.
- Understanding of power supply types (TN, IT, TT systems) and connection criteria.
Installation Clearances
- Top: 40 mm
- Bottom: 20 mm
- Left and Right: 5 mm
- Increase space by 10-15 mm if adjacent device is a heat source.
- Install a multi-phase circuit breaker (e.g., residual current circuit breaker) and a correctly sized fuse or circuit breaker between the RCD and the product.
Product Specific Warnings
- Risk of electrical shock and energy hazard: All failures must be examined by a qualified technician. Do not remove the power supply case yourself.
- Risk of electric arcs and electric shock (danger to life): Connecting primary and secondary sides together is not allowed.
- Risk of burn hazard: Do not touch the unit during operation or shortly after disconnection.
- Risk of fire and short circuit: Protect openings from foreign objects or dripping liquids.
- Output current and wattage must not exceed rated values.
Cleaning
Important: Do not use aggressive cleaning agents, rubbing alcohol, or other chemical solutions as they can damage the housing and cause malfunction. Do not immerse the product in water.
- Disconnect the product from the power supply and prevent inadvertent connection.
- Allow the product to cool down to ambient temperature.
- Clean the product with a dry, fibre-free cloth.
Technical Data
| Item No. | Rated Output |
|---|---|
| 2645198 | 24 V/DC 5.0 A 120 W |
| 2645199 | 24 V/DC 5.0 A 120 W |
| 2645200 | 12 V/DC 1.25 A 15 W |
| 2645201 | 24 V/DC 0.625 A 15 W |
| 2645202 | 12 V/DC 2 A 24 W |
| 2645203 | 24 V/DC 1.5 A 36 W |
| 2645204 | 12 V/DC 4.5 A 54 W |
| 2645205 | 24 V/DC 2.5 A 60 W |
| 3427719 | 5 V/DC 4.5 A 22.5 W |
| 3427721 | 12 V/DC 7.1 A 85.2 W |
| 3427722 | 24 V/DC 3.83 A 92 W |
| 3427723 | 12 V/DC 11.3 A 135.6 W |
| 3427724 | 24 V/DC 6.25 A 150 W |
| 3428340 | 5 V/DC 2.4 A 12 W |
| 3428341 | 24 V/DC 0.625 A 15 W |
| 3428342 | 5 V/DC 3 A 15 W |
Ingress protection: IP20
Protection class: II
Operating conditions: -20 to +70 °C, 20-95% RH (non-condensing)
Storage conditions: -40 to +85 °C, 10-95% RH (non-condensing)
