Nordtronic Track Light GU10 ECO excl. light source
Installation Instructions
Product Dimensions
A technical drawing illustrates the track light's dimensions:
- Height: 48 mm
- Width of track connector: 48 mm
- Rotation angle: 355°
- Tilt angle: 90°
- Diameter of lamp housing: Ø35.50 mm
Installation Steps
Step 1: Safety First
Important: Ensure the power supply is switched OFF before proceeding. [⚡ icon] A person icon with a lightning bolt indicates power off. An electrical panel icon displays a warning triangle [⚠️] and an information symbol [ℹ️], advising users to consult safety guidelines.
Step 2: Prepare Lamp
Insert the GU10 lamp into the track light housing. An arrow indicates the direction of insertion.
Step 3: Attach to Track
Slide the track light connector onto the lighting track. Arrows show upward movement. A close-up view shows a selector switch with "OFF" and "ON" positions.
Step 4: Correct Orientation
Correct: A checkmark [✔️] symbol highlights the proper way to insert the track light into the track. Incorrect: A cross mark [❌] symbol indicates an improper insertion method.
Step 5: Final Placement
The track light is now correctly mounted on the lighting track.
Step 6: Power On
Switch the power supply ON. The switch icon shows the "ON" position. Electrical warning [⚠️] and information [ℹ️] symbols are present again, reinforcing safety awareness.
Technical Specifications
- Connection Type: [1-pole connector]
- Voltage: 220-240 VAC
- Max Wattage: 7.5W LED
- Lamp Base: GU10
- Ingress Protection: IP20
- Suitable for indoor use [? icon]
- Operating Temperature: 50°C (approx.)
- Lifespan: 1750 hours (approx.)
- Certifications: CE
- Disposal: [crossed-out WEEE symbol] (Please dispose of electronic waste responsibly)
Nordtronic
