Outsunny 7-Seater Rattan Set Assembly and Care Instructions
Model Numbers: 860-105, 860-105V70
Thank you for purchasing this product. Please read all instructions in this user's manual for optimal use. For any questions, please contact our customer care center.
Contact Information
Our contact details are as follows:
| Country | Phone | |
|---|---|---|
| UK | 0044-800-240-4004 | enquiries@mhstar.co.uk |
| DE | 0049-0(40)-88307530 | service@aosom.de |
| FR | 0033-1-84166106 | aosom@mhfrance.fr |
| ES | 0034-931294512 | atencioncliente@aosom.es |
| PT | 0034-931294512 | info@aosom.pt |
| IT | 0039-0249471447 | clienti@aosom.it |
| US | 001-877-644-9366 | customerservice@aosom.com |
| CA | 416-792-6088 | customerservice@aosom.ca |
Packing Details
The product is packed in a total of 4 boxes.
Box 1/4: Contains parts A (x2), B (x2), C (x2), T (x2).
Box 2/4: Contains parts C1 (x1), D1 (x2), E1 (x1), F1 (x2).
Box 3/4: Contains parts A1 (x1), B1 (x1), D (x2), W (x3), X (x2).
Box 4/4: Contains parts A2 (x2), U (x2), V (x3), O (x2).
Important Information & Usage Tips
For domestic use only.
- Place the furniture stably on a flat floor.
- Mount the chairs under a shelter or awning.
- Keep away from open flames and heat sources.
- Do not hang anything on the structure.
- Do not exceed the maximum weight capacity (160kg indicated on the product).
- Avoid staying on the furniture during storms or adverse weather conditions.
- Cover the furniture when not in use.
Precautions Before Assembly
- Prepare a clean and dry assembly area.
- Verify that the product is not damaged.
- Check that all parts and accessories are present.
Maintenance and Storage
- Clean with a soft fabric.
- Regularly remove leaves and water collected on the fabric.
- Inspect the furniture regularly to detect any defects.
- Store fabric parts completely dry in a clean, dry place to prevent mold.
- Do not use the product if seat cloths, cushions, or tarpaulins are aged or deteriorated. Contact customer service immediately in such cases.
Assembly Instructions
General Assembly Notes:
- Confirm all components are present before starting assembly.
- For furniture protection, place all parts on a clean, smooth surface to prevent damage.
- Assembly requires at least 2 people.
- Do not confuse similar screws.
- Do not fully tighten bolts until all parts are connected.
- Periodically check all fittings and re-tighten as necessary.
Step 1: Assemble the base of the chairs. Attach part B to part D using screws F (x2) and G (x1), and nuts K (x3). Ensure 60% tightness initially.
Step 2: Assemble the base of the sofa. Attach part C to part D using screws F (x2) and G (x1), and nuts K (x3). Ensure 60% tightness initially.
Step 3: Attach part E to the assembled base using screws L (x4) and nuts M (x2). Use screw I (x2) with M8*65 for further securing. Ensure 60% tightness.
Step 4: Attach part H to the top of the assembled structure using screws L (x4) and nuts M (x2). Use screws H (x2) with M8*40 for further securing. Ensure 60% tightness.
Step 5: Two armchairs are shown.
Step 6: Assemble the sofa seat base. Connect the sections using screws L1 (x4), J (x12), and K (x6). Ensure 60% tightness.
Step 7: Continue assembling the sofa base by connecting sections D1, C1, D1 using screws G (x4), J (x8), and K (x4). Ensure 60% tightness.
Step 8: Complete the sofa base assembly by connecting sections E1, C1, D1 using screws J (x12), K (x6), and L1 (x6). Ensure 60% tightness.
Step 9: Attach the armrests and backrests (parts A1, B1) to the sofa base using screws J (x18), K (x8), and L1 (x8). Use screws F (x2) for final tightening. Ensure 60% tightness.
Step 10: The assembled sofa is shown.
Step 11: Place cushions (V, W) and accent pillows (U) on the sofa and armchairs. Place ottomans (X) with storage (A2) as shown.
Caution
Be careful of pinching or cutting hazards during assembly. The manufacturer is not responsible for damages caused by improper installation or weather conditions.
