BAUHN 3-in-1 Wireless Charging Stand

Product Outline

The BAUHN 3-in-1 Wireless Charging Stand features:

• Magnetic Mobile phone wireless charging panel
• Watch wireless charging panel
• Support Rod
• Earbud wireless charging panel
• Indicator Light
• Type-C port
• Non-slip mat

Applicable Devices

1. Devices with built-in quick charge/normal charge wireless receiver.
2. Devices with outer-face wireless charging receiver.

Usage Instructions

1. Connect the wireless charger to the AC power supply using the power adapter (adapter not included) and a Type-C charging cable (included). The wireless charger enters standby mode, and the indicator light stays red.
2. The mobile phone wireless charging panel is magnetic. If your mobile phone supports wireless charging but not Magsafe, you can attach the included Magnet Ring to your phone's wireless charging area. This ring helps the phone attach to the magnetic panel for charging.
• Remove the adhesive cover from the Magnet Ring and stick it onto the correct charging area. Press firmly and do not move for several hours to ensure a secure bond.
• The Magnet Ring may not adhere well to glass surfaces. If your phone has a glass back, use a thin phone case made of a different material and adhere the ring to the case.
3. Place your device vertically or horizontally in the center of the wireless charger until charging begins. The indicator light will turn red and blue.
4. If both the magnetic wireless charging panel and the earbud panel are charging, the indicator light will turn blue.
5. It is recommended to charge your watch when its power is around 10%. Charging will be significantly slower if the device runs out of power completely; please be patient.

Specifications

• Input Voltage: 5V/3A, 9V/3A (QC)
• Output Power:
• Magnetic mobile phone charging panel: Max 15W/10W/7.5W/5W
• Earbud charging panel: Max 5W
• iWatch charging panel: Max 2.5W
• Charging Efficiency: 70%-80%

Standard Accessories

• 1x Multifunctional Wireless Charger
• 1x USB Type-C Cable
• 1x User Manual
• 1x Magnetic Adhesive Ring

Attention

• Keep the charger away from water or other liquids.
• Ensure the charger is powered off before cleaning.
• Recommended operating temperature: 1°C to 45°C.

FCC Instruction

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.

Distributed by: ALDI Inc. Batavia, IL 60510

Website: www.ALDI.us

Contact: info@xtremetime.com

Phone: (US) 1-888-204-0934

Descripción del Producto (Spanish)

El BAUHN 3-en-1 Soporte de Carga Inalámbrico cuenta con:

• Panel magnético de carga inalámbrica para teléfono celular
• Panel de carga inalámbrica para iWatch
• Barra de soporte
• Panel de carga inalámbrica para auriculares
• Luz indicadora
• Puerto Tipo-C
• Alfombrilla antideslizante

Dispositivos que se pueden utilizar

1. Dispositivos con receptor integrado de carga inalámbrica rápida/carga normal.
2. Dispositivos con receptor externo de carga inalámbrica.

Instrucciones de uso

1. Conecte el cargador inalámbrico a la fuente de alimentación de CA mediante el adaptador de corriente (adaptador no incluido) y un cable de carga tipo C (incluido). El cargador inalámbrico entra en modo de espera y la luz indicadora se mantiene en rojo.
2. El panel de carga inalámbrica para teléfono celular es magnético. Si su teléfono celular soporta la carga inalámbrica, pero no tiene el sistema Magsafe, puede pegar el anillo magnético (uno incluido) en el área de carga inalámbrica de su teléfono celular; este anillo ayuda a mantener su teléfono en el panel de carga inalámbrica para teléfono celular, y de esta forma puede cargarlo.
• Quite la cubierta adhesiva del anillo magnético y pegue el anillo en la zona de carga correcta, presione para pegarlo y no lo mueva durante algunas horas para que se pegue bien.
• El anillo magnético no se puede pegar firmemente sobre una superficie de cristal. Si su teléfono tiene una superficie de cristal, puede utilizar una funda de teléfono plana y fina de otro material y pegar el anillo en la funda.
3. Coloque su dispositivo vertical u horizontalmente en el centro del cargador inalámbrico para que comience a cargarse; la luz indicadora se mantiene en rojo y azul.
4. Si el panel magnético de carga inalámbrica y el panel de auriculares están en el proceso de carga, la luz indicadora cambia a azul.
5. Es muy recomendable que cargue su reloj cuando tenga alrededor del 10% de energía; si lo usa hasta dejarlo sin energía, la carga será mucho más lenta, ¡y tendrá que tener paciencia!

Especificaciones

• Voltaje de entrada: 5V/3A, 9V/3A (QC)
• Potencia de salida:
• Panel magnético de carga para teléfono celular: 15W/10W/7.5W/5W como máximo
• Panel de carga de auriculares: 5W como máximo
• Panel de carga de iWatch: 2.5W como máximo
• Eficiencia de carga: 70% - 80%

Accesorios estándar

• 1x Cargador inalámbrico multifuncional
• 1x Cable USB tipo C
• 1x Manual de usuario
• 1x Anillo adhesivo magnético

Atención

• Mantenga el cargador alejado del agua u otros líquidos.
• Si necesita limpiar el cargador, asegúrese de que esté apagado.
• La temperatura ambiente de uso debe estar entre 1°C y 45°C.