TELE System SONIC32 SMART

1.4 Connections

The following inputs and outputs are available behind the TV:

• 1. USB 2.0 (x2): USB2.0 ports for Mediaplayer function ?
• 2. Headphone output: 3.5mm jack ?
• 3. CI/CI+: Common Interface module slot
• 4. Audio Out: Digital audio output ?
• 5. HDMI1, HDMI2, HDMI3 (v.1.4): For connecting an AV source ?
• 6. RF IN (T2/C): Antenna input (IEC) for terrestrial (DVB-T/T2) or cable (DVB-C) ?
• 7. RF IN (S2): Satellite RF Antenna Input (type F) ?
• 8. RCA: Audio-video input for connection of RCA devices (CVBS + Stereo LR)
• 9. PC Audio IN and PC VGA: Audio inputs (3.5mm jack) and video (VGA) for PC
• 10. YPbPr (mini): Component Video Input (3.5mm jack)
• 11. LAN: Ethernet port (RJ45) required for SmartTV/HbbTV functions ?
• 12. Power: 230VAC, 50Hz

1.4.1 Remote Control

Insert 2 AAA batteries (not supplied) into the remote control compartment, respecting the correct polarities. Exhausted batteries must be disposed of separately from household waste and brought to any point of sale or collection.

WARNINGS: To prevent corrosive liquid leakage from damaging the remote control, it is advisable to remove the batteries if you believe you will not use the device for a long time. Avoid using different types of batteries, such as new and used batteries, at the same time.

First Installation

Connect the antenna cable (terrestrial and/or satellite) and the Ethernet cable (if available). After turning on the TV, perform the first installation using the wizard. Use the arrow and OK keys to select and confirm:

1. Steps 1, 2, 3, 4: Language/Country/Password/Time Zone Choice.
2. Step 5: Connecting to the network (cable or wireless):
   • Cable: The network connection is established without any intervention.
   • Wireless: Select "Use WiFi", then choose the WiFi network you want to connect the TV to and enter the password (press OK to invoke the virtual keyboard), then confirm by selecting "Connect".
3. Step 6: APP "E-Share". Use the QR Code to download and install the app.
4. Step 7: Choosing the startup mode/source.

ATTENTION!

• The system does not accept "0000" as a password.
• The E-Share app must be installed on a mobile device (e.g., smartphone). For proper functioning, the mobile device and the Smart TV must be connected to the same network.
• The application does not completely replace the traditional remote control; it is mainly intended for using the Smart features of the TV (applications, mediaplayer, etc.).
• Some applications require the use of a keyboard and/or mouse; in such cases, the traditional remote control provided with the TV is not sufficient for control.

Main Functions

1.5 Digital TV Mode

Channel Search:

1. Go to the Channel menu.
2. Select the source from the Antenna Type (Terrestrial, Cable, or Satellite) option.
3. Select the Scan item.
4. Define the search parameters according to the antenna system and/or preferences.
5. Start scanning.

NOTE: If you choose to use the LCN (terrestrial) or TivùSat (satellite) function, a channel list with a predefined sort order will be created at the end of the search. Viewing encrypted channels requires the use of a dedicated conditional access module (CAM) and its smart-card (CA), to be purchased separately.

Selecting Channels:

At the end of the scan, a channel list will be created for each source. The channel lists can be consulted individually after selecting the source, for example:

1. Terrestrial Channels: Access the Channel/Antenna Type menu and set Terrestrial.
2. Satellite Channels: Access the Channel/Antenna Type menu and set Satellite.

1.6 Smart (Home) Mode

The Home menu, also accessible directly from the Home button of the remote control, allows you to access the following features:

• Application management and use.
• Navigation browser.
• Selection of input sources/modes.
• Access to the application store for app download and installation.
• Access to the Multimedia menu for playing audio/video content from USB external memory devices or for managing files saved in the TV's internal memory, such as installing from APK files (recommended for advanced users only).
• Access to the system settings.

1.6.1 System Settings

Accessible from the Home menu, allows you to configure:

• Network settings (network connection via LAN or Wireless) ?.
• Time setting for adjusting the time and its parameters.
• Common settings, for general changes such as language, keyboard type, permission/account management.
• Info, to get system information (HW/SW version, MAC address, memory, GPU...).

WARNINGS: To take advantage of SMART TV features, you need to connect your TV to the internet.

1.6.1.2 Antenna system configuration (Sat)

The default settings include the configuration of a single LNB fixed antenna system, receiving the signal from the Hotbird 13°E satellite. In case of a different antenna system, you need to change the configuration by modifying the parameters in the Channels/Scan menu.

NOTES AND WARNINGS: The TV is compatible with universal single converter, multi-satellite DiSEqC (1.0 - 1.1 - 1.2 - 1.3) and multi-user SCR/Unicable systems. Incorrect antenna configuration can result in some or all channels not loading. It is recommended to contact a professional installer for installation. The Signal Level and Quality indicators refer to the selected satellite Transponder on the screen. Make sure it is valid/updated and really active. It is not recommended to connect the TV to the satellite signal via the LNB Out/Loop Through connector of an external satellite receiver because both devices cannot operate at the same time. In case of a system with LNB SCR: each TV/receiver connected to the same system must use a different SCR channel. To connect multiple receiving devices to an SCR system, do not use the loop through antenna connection of an external satellite receiver, but use a dedicated external signal splitter.

1.7 Factory Reset (reset)

Resets all settings to the initial condition. Accessible from the Home menu > Settings > Common > System Restore.

WARNING: Restoring factory settings clears all customizations made by the user, including stored channels, downloaded applications, and changed settings. In addition, confirming the reset, the TV will perform a full system restart, then display the first installation wizard on screen.

Technical Specifications

Simplified EU Conformity Declaration

The manufacturer, TELE System Digital s.r.l., states that the radio equipment type of SMART TV named SONIC32 SMART complies with the 2014/53/EU directive. The full text of the EU compliance declaration is available at the following Internet address: https://www.telesystem.it/CE