Tecnoswitch TA301SF Flashing Lamp

Product Overview

The Tecnoswitch TA301SF is a signal light, also referred to as a flashing lamp, designed for operation with a 230V power supply and features an E14 lamp cap.

Specifications

• Power Supply: 230 V - 50 Hz
• Lamp Cap Type: E14
• Electrical Wire Requirements: Minimum 2 x 0.75 mm² conductors; Maximum 2 x 1.5 mm² conductors.
• Product Dimensions: The product has associated dimensions of 114 mm, 148 mm, and 120 mm, as indicated in the installation diagrams.

Installation Instructions

Standard Installation (Wall Mounting)

This installation method is for mounting the unit onto a wall surface.

Procedure:

1. Install the unit on the wall using the supplied mounting bracket and screws.

Diagram Description: A visual shows a wall with a bracket attached, followed by the lamp unit mounted onto the bracket. The text "bracket supplied" is associated with this diagram.

Installation on a Column

This method allows for direct installation onto a column, including those with a pyramidal shape.

Procedure:

1. Install the unit directly onto a column. The supplied mounting bracket is not required for this installation type.

Diagram Description: A visual depicts a column structure with the lamp unit mounted directly onto its surface. The text "bracket supplied" is shown, indicating it is not used here.

Electrical Connection Details

The product requires electrical connection. The recommended cable specifications are:

• Minimum Wire Gauge: 2 conductors, each 0.75 mm²
• Maximum Wire Gauge: 2 conductors, each 1.5 mm²

Diagram Description: An illustration shows the electrical wiring, detailing the connection of wires and specifying the required conductor cross-sectional area.