Intex® Spa Headrest Owner's Manual

Safety Warnings

WARNING

• To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
• This product is not a toy. Do not allow children to play with this product.
• This is not a flotation device.
• Never allow anyone to step, stand, sit or jump on this product.
• Remove product before placing a cover over the spa tub.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR DEATH.

Parts Reference

NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.

Setup Instructions

1. Inflate the headrest to the desired firmness. Do not over inflate or use high pressure air compressor to inflate. See Fig (1).
2. Ensure the valve is securely closed and recessed. See Fig (2).
3. Insert one side of the C-clamp through the loops at the back of the headrest. Make sure the wider side of the headrest is facing up. See Fig (3 & 4).
4. Open the C-clamp and fix the headrest over the selected spa wall edge area. See Fig (5 & 6). Move the headrest along the C-clamp arm to adjust the height of the headrest.

NOTE: Adjust the firmness by releasing or adding more air.

Maintenance and Storage Instructions

1. For cleaning use only mild soapy solution. Do not use any chemicals.
2. Remove the headrest from the spa and separate the C-clamp from the headrest.
3. Deflate the headrest completely and close the valve cap back.
4. Clean and air dry thoroughly before folding.
5. Lay the headrest flat, fold loosely and avoid sharp bends, corners and creases which can damage the headrest.
6. The original packaging can be used for storage. Store in a dry, cool storage location.
7. In case of repairs, use only common PVC repair glue and patches.

Save These Instructions