Godox LC500R RGB LED Light Stick

Foreword

Thank you for purchasing this Godox Product! The RGB LED Light Stick LC500R is a continuous light with high light brightness, wireless adjustment, and multiple modes. It is suitable for almost all shooting occasions, such as live streaming, camping, makeup, portrait shooting, video, wedding, and children's photography. It is portable and easy to operate.

Features:

• Freely switch between LED bicolor mode, colorful light mode, and 39 situational special effects modes.
• Easy adjustment of color temperature, light brightness, hue, and color saturation.
• Blinks and changes colors with the rhythm of music.
• Features a display to clearly show parameters.
• Easy operation and wide application.

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• Keep out of reach of children.
• As this product does not have a waterproof function, please take measures for waterproofing in rainy or damp environments.
• Do not use the flash unit in the presence of flammable gases, chemicals, or other similar materials. In certain circumstances, these materials may be sensitive to the strong light emitting from this flash unit and may result in fire or electromagnetic interference.
• This product has a built-in lithium battery. Do not disassemble, impact, squeeze, or put it into fire. If serious bulging occurs, please do not use. Do not use or store the product if the ambient temperature exceeds 50°C. Please charge the product with the specialized charger and operate it correctly within the defined voltage and working temperature according to the instruction manual.

Parts

Body

The main components of the LC500R are:

• 01. LED Beads
• 02. Handle
• 03. DC Power Jack
• 04. Bracket Mounting Hole
• 05. Reset Button
• 06. Reflector
• 07. Control Panel
• 08. Power Switch
• 09. CH/GR Button
• 10. MOD Button
• 11. FN Multifunctional Select Dial
• 12. DIM Button
• 13. Color Gamut
• 14. MIC Hole
• 15. LCD Panel

LCD Panel Display Modes

• CCT: Bicolor Modes: Displays color temperature and brightness.
• HSI: Colorful Light Modes: Displays hue, saturation, and brightness.
• FX: Situational Special Effects Modes: Displays the selected special effect mode.

Battery Management

1. Power Supply

The built-in Li-polymer battery provides approximately 1.5 hours of lighting at 100% brightness after a full charge.

2. Charge

Charging takes approximately 2.5 hours. The charging indicator is red while charging and turns green when fully charged.

Attaching Reflector

Installation:

Choose the side that needs the reflector and adjust its direction. Match the ridge in the reflector's handle ring with the groove on the handle, then slip the reflector over the LED light stick and push it in. Extend the reflector for shooting.

Detachment:

Hold the handle and push the reflector from the bottom up to detach.

Operation

1. Setting

1.1 Power On/Off:

Long press the power button [▶️] to turn the LED light on or off. The current information will be displayed on the LCD panel.

1.2 Mode Selection:

Press the MOD button to switch between modes: CCT indicates bicolor mode, HSI indicates colorful mode, and FX indicates situational special effects mode.

2. Wireless Remote Control

This product features a 2.4G wireless system for remote grouping and control. Up to 6 groups of LED light sticks can be controlled. 16 channels are available with strong anti-interference capability. Ensure the LED light stick and remote control are set to the same channel, group, and ID before use.

Channel/Group/ID Setting:

Press the CH/GR button to enter the setting interface.

2.1 Channel Setting:

Press the FN button to select CH, then turn the select dial to choose the channel value (1-32).

2.2 Group Setting:

Press the FN button to select GR, then turn the select dial to choose the group value (A-F).

2.3 ID Setting:

Press the FN button to select ID, then turn the select dial to choose the ID value (1-99).

2.4 Turn On/Off Wireless:

Press the FN button to select the wireless symbol [?], then turn the select dial to turn the wireless function on or off.

3. Bicolor Mode

3.1 Color Temperature Adjustment:

Turn the FN multifunctional select dial to adjust the color temperature from 2500K to 8500K.

3.2 Light Brightness Adjustment:

Press the DIM button. The brightness value will blink. Turn the select dial to adjust the value from 0 to 100%.

3.3 P Mode:

Press the FN button, and 'P' will be displayed on the LCD panel, indicating P mode. In P mode, the brightness changes with the color temperature, reaching its maximum at 4500K. In normal mode, the brightness remains consistent when adjusting color temperature.

4. Colorful Mode

Press the MOD button to enter the setting interface.

4.1 Adjust Hue (H):

Press the FN multifunction select dial, and H will be selected. Turn the FN multifunctional select dial to adjust the hue from 0 to 360°.

4.2 Adjust Saturation (S):

Press the FN multifunction select dial, and S will be selected. Turn the FN multifunctional select dial left or right to adjust the saturation from 0 to 100%.

4.3 Adjust Light Brightness:

Press the DIM button and turn the select dial to adjust the brightness from 0 to 100%.

5. FX Situational Special Effects Mode (39 kinds)

5.1 Select Mode Category:

Turn the select dial to choose from 14 categories of special effects. The modes will display circularly.

5.2 Select Specific Effect:

After choosing a mode category, press the FN multifunctional select dial to cycle through effects I, II, and III within that category.

5.3 Adjust Light Brightness:

Turn the light brightness select dial to adjust from 0 to 100%.

5.4 Special Effects List:

There are 39 kinds of situational special effects, divided into 14 categories:

Technical Data

* Product design and specifications are subject to change without notice.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Product Warranty

Dear customers, this warranty card is an important certificate to apply for our maintenance service. Please fill in the following form in coordination with the seller and safekeep it. Thank you!

Product Information

• Model: LC500R
• Product Code Number: [Not specified in document]

Customer Information

• Name:
• Contact Number:
• Address:

Seller Information

• Name:
• Contact Number:
• Address:
• Date of Sale:

Note: This form shall be sealed by the seller.

Applicable Products

This document applies to the products listed on the Product Maintenance Information. Other products or accessories (e.g., promotional items, giveaways, and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period

The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day of purchase for the first time, and the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call, and they will offer you service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, Godox may offer maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but this is not considered an obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases:

• The product or accessory has expired its warranty period.
• Breakage or damage caused by inappropriate usage, maintenance, or preservation, such as improper packing, improper usage, improper plugging in/out of external equipment, falling off or squeezing by external force, contacting or exposing to improper temperature, solvents, acids, bases, water immersion, or damp environments.
• Breakage or damage caused by non-authorized institutions or staff during installation, maintenance, alteration, addition, or detachment.
• The original identifying information of the product or accessory has been modified, altered, or removed.
• No valid warranty card.
• Breakage or damage caused by using illegally authorized, non-standard, or non-public released software.
• Breakage or damage caused by force majeure or accident.
• Breakage or damage that cannot be attributed to the product itself.

In such situations, you should seek solutions from the related responsible parties, and Godox assumes no responsibility. Damage caused by parts, accessories, or software beyond the warranty period or scope is not included in the maintenance scope. Normal discoloration, abrasion, and consumption are not considered breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Godox After-sale Service Call: 0755-29609320-8062