Pioneer DMH-1700NEX/DMH-1770NEX/DMH-160BT Quick Start Guide

Model Numbers: DMH-1700NEX, DMH-1770NEX, DMH-160BT

Basic Operations

What's What

Touch
Touch and slide
Touch and hold
Volume (+/-)
Display off
Power off
Display top menu screen
Mute/unmute
Activate voice recognition

Selecting the Source

Select a source.

Selecting the Clock

Switch to clock adjustment display.

Adjust the clock.

Media Playback

Moving Images Operation

Pause/start playback.
Change playback point.
Select previous/next file.
Fast forward/reverse. Touch again to change playback speed.

List Search Operation

Display playlist screen.
Select media file types.
Select title/folder to play.
Scroll list.

Audio Operation

Pause/start playback.
Select previous/next file.
Fast forward/reverse. Touch again to change playback speed.
Set audio playback function.

Tuner Operation

Store strongest broadcast frequencies.
Select band.
Tune to next station.
Recall preset channel from memory.
Store current frequency to key.
Displays preset channel for 10 seconds, then auto-switches.
Tune to strong signal stations only.
Start seek tuning.

Bluetooth Connectivity

Bluetooth Connection

[Bluetooth Settings] [Search].
Select the Bluetooth device name.

Note: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners.

Bluetooth Telephone Operation

Enter phone number directly.
Switch to phone book mode.
Switch to call history list.
Make outgoing call.

Safety and Precautions

Warnings

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation and protect from overheating. To prevent fire hazard, never block or cover openings with items like papers, floor mats, or cloths.

Precautions

This product is evaluated under moderate and tropical climate conditions according to IEC 60065 safety requirements for audio, video, and similar electronic apparatus.

Your Ears' Safety

To ensure optimal performance and protect your hearing, set the volume to a reasonable level. The sound should be clear and free of distortion. Over time, your hearing adapts to higher volumes, making what seems "normal" potentially harmful. Set your equipment at a safe level before your hearing adapts.

Establish a Safe Level:

Set volume control at a low setting.
Slowly increase volume until clear and comfortable, without distortion.
Once comfortable, set and leave volume.

Observe These Guidelines:

Do not turn volume so high that you cannot hear your surroundings.
Use caution or temporarily discontinue use in hazardous situations.
Do not use headphones while operating a motorized vehicle; this is a traffic hazard and illegal in many areas.

Compliance Information

This device contains licence-exempt transmitter(s)/receiver(s) that comply with FCC Rules Part 15 and Innovation, Science, and Economic Development Canada licence-exempt RSS(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including that which may cause undesired operation.

This equipment complies with FCC/ISED radiation exposure limits for an uncontrolled environment and meets FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules.

This transmitter must not be co-located or operated with any other antenna or transmitter.

Alterations or modifications without authorization may invalidate the user's right to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to FCC Rules Part 15. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

Supplier's Declaration of Conformity:

Product Name: RDS AV RECEIVER