KitchenAid Ice Cream Maker Attachment

Safety Information

Your safety and the safety of others are very important. This manual and your appliance contain many important safety messages. Read and follow all safety messages.

Safety Symbols:

• This is the safety alarm symbol. ⚠️ This symbol warns you of potential hazards that could cause death or injury to you or others.

All safety messages will be preceded by the safety alert symbol and the words "DANGER" or "WARNING". These words mean:

DANGER: You will be killed or seriously injured if you do not immediately follow instructions.

WARNING: You will be killed or seriously injured if you do not follow instructions.

All safety messages will tell you what the hazard is, how to reduce the risk of injury, and what can happen if the instructions are not followed.

Important Precautions

When using electrical appliances, basic precautions should always be followed, including:

1. Read all instructions. Misuse of the appliance can cause personal injury.
2. Do not place the mixer/stand mixer in water or other liquids to prevent electric shock.
3. This appliance is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been given instructions concerning the use of the appliance by a person responsible for their safety.
4. Children should not use the appliance without supervision.
5. For the European Union: Appliances may be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, provided they are supervised or have received instructions on the safe use of the appliance and understand the hazards involved. Children must not play with the appliance.
6. For the European Union: This appliance must not be used by children. Keep this product and its power cord out of reach of children.
7. Supervise when this or any other appliance is used near children.
8. Turn the appliance off [Power Off] and unplug it from the power outlet when not in use, before putting on or taking off parts, and before cleaning. To unplug, grasp the plug and pull it from the outlet. Never pull the power cord.
9. Do not touch moving parts.
10. Do not use the appliance if the power cord or plug is damaged, or after the appliance has malfunctioned, been dropped, or otherwise damaged. Contact the nearest authorized Service Center for examination, repair, or electrical or mechanical adjustment.
11. Using accessories/attachments not recommended or sold by KitchenAid may cause fire, electric shock, or injury.
12. Do not use the appliance outdoors.
13. Do not let the power cord hang over the edge of a table or countertop.
14. Do not let the cord come into contact with hot surfaces, such as the stove.
15. Never leave the appliance unattended while it is operating.
16. Keep hands, hair, clothing, and spatulas or other utensils away from the dasher when the appliance is operating. This reduces the risk of personal injury and/or damage to the mixer/stand mixer.
17. Remove the dashers from the mixer/stand mixer before cleaning.
18. To prevent damage to the product, do not use the mixer/stand mixer in hot environments, such as an oven, microwave, or on a stove/cooktop.
19. Refer to the 'Important Precautions' section in the owner's manual supplied with your mixer/stand mixer.
20. Allow the appliance to cool completely before attaching or removing parts and before cleaning.
21. Refer to the "Maintenance and Cleaning" section for instructions on cleaning food-contact surfaces.
22. This appliance is intended for household and similar use, such as:
    • Staff kitchens in shops, offices, and other work environments;
    • Farms;
    • By guests in hotels, motels, and other residential environments;
    • Bed and breakfasts and similar environments.

Assembly Instructions

For Tilt-Head Mixers:

Before First Use: Remove the "Do not immerse in water" label before using the attachment. The freezer bowl, dasher, and drive assembly must be washed by hand.

1. Turn the mixer/stand mixer off [Power Off] and unplug it from the power outlet.
2. IMPORTANT: Before first use, set your freezer to the coldest setting and place the freezer bowl in the freezer for at least 16 hours. Do not pour ice cream batter into the freezer bowl until all parts are assembled and the mixer/stand mixer is switched on.
3. Tilt the mixer head back and remove the mixing bowl.
4. Place the dasher into the freezer bowl.
5. Place the freezer bowl onto the adapter plate. NOTE: Use the freezer bowl immediately after removing it from the freezer, as it will begin to thaw.

Attaching the Drive Assembly for Tilt-Head Mixers:

1. Ensure the mixer/stand mixer is turned off [Power Off] and unplugged. Keep the mixer head tilted back and place the dasher and freezer bowl.
2. Place the drive assembly onto the mixer/stand mixer, aligning the recess with the mixer/stand mixer shaft.
3. Lower the mixer head so the drive assembly contacts the dasher. If the drive assembly does not contact the dasher, slide the drive assembly forward or backward until it makes proper contact with the dasher.
4. Ensure the mixer head is fully lowered.
5. Secure the locking lever in position A. Before mixing, check the lock by trying to lift the mixer head.

6. Plug the mixer/stand mixer into a grounded outlet.

For Bowl-Lift Mixers:

Before First Use: Remove the "Do not immerse in water" label before using the attachment. The freezer bowl, dasher, and drive assembly must be washed by hand.

1. Turn the mixer/stand mixer off [Power Off] and unplug it from the power outlet.
2. Set the bowl lift lever to the lowest position and remove the mixing bowl.
3. IMPORTANT: Do not pour ice cream batter into the freezer bowl before the mixer/stand mixer is started, as the batter may freeze prematurely and block the dasher.
4. NOTE: Use the freezer bowl immediately after removing it from the freezer, as it will begin to thaw.
5. Place the freezer bowl over the securing pins. Push on the back of the freezer bowl until the pin clicks into the spring lock. NOTE: The freezer bowl is suitable for most bowl-lift mixers. If the pin on the back of the bowl is too long to click into the spring lock, remove the bowl and rotate it so the empty side faces the spring lock. Repeat step 3.
6. Place the dasher into the freezer bowl.

Attaching the Drive Assembly for Bowl-Lift Mixers:

1. Ensure the mixer/stand mixer is turned off [Power Off] and unplugged.
2. Ensure the bowl lift lever is still in the lowest position and the freezer bowl and dasher are in place.
3. Place the drive assembly onto the dasher and align the recess with the mixer/stand mixer shaft.
4. Raise the bowl so the drive assembly contacts the mixer/stand mixer.

5. Plug the mixer/stand mixer into a grounded outlet.

Using the Product

Making Ice Cream

IMPORTANT: If you pour batter into the freezer bowl before starting the mixer/stand mixer, the batter may freeze prematurely and block the dasher.

Before First Use: Set your freezer to the coldest setting. Place the freezer bowl in the freezer for at least 16 hours. Prepare the ice cream batter in advance. Refer to 'Tips for Great Results' in the online product manual.

1. Turn the mixer/stand mixer to speed 1 (stir/mix) and pour the ice cream batter into the freezer bowl.
2. Mix for 20 to 30 minutes or until the desired texture is reached. After 12-15 minutes of mixing, you may add solid ingredients such as fruit, nuts, candies, or chocolate chips.
3. Remove the dasher and the freezer bowl. Use a rubber spatula or a plastic or wooden spoon to scoop the ice cream into dessert bowls or store it in an airtight container.

NOTE: If the dasher begins to slide and makes a clicking sound, this indicates the ice cream is ready.

NOTE: The ice cream maker produces soft-serve ice cream. For a firmer texture, freeze the ice cream for 2-4 hours in a shallow, airtight container in the freezer.

IMPORTANT: Do not store ice cream in the freezer bowl in the freezer. If you scrape hard ice cream from the freezer bowl with a metal spoon or utensil, you may damage the freezer bowl.

Maintenance and Cleaning

Cleaning the Ice Cream Maker

IMPORTANT: Allow the appliance to cool completely before attaching or removing parts and before cleaning.

IMPORTANT: Allow the freezer bowl to reach room temperature before cleaning.

1. The dasher and drive assembly are dishwasher safe (top rack only).
2. Wash the freezer bowl by hand in warm water with a mild detergent. Never put it in the dishwasher. Dry the freezer bowl thoroughly before placing it in the freezer.

End-of-Life Electrical Equipment

Disposal of Packaging Material

Packaging material is recyclable and marked with the ♻️ [Recycling Symbol]. The various components of the packaging must be disposed of responsibly and in full compliance with local waste disposal regulations.

Product Recycling

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling.

For more detailed information about the treatment, recovery, and recycling of this product, please contact your local administration, your waste disposal service, or the shop where you purchased the product.

Declaration of Conformity

For the European Union

This appliance was designed, manufactured, and distributed in compliance with the safety requirements of the following EC directives: 2014/35/EU, 2014/30/EU, and 2011/65/EU (RoHS Directive) and their subsequent amendments.

KitchenAid Warranty Terms ('Warranty')

Belgium:

KitchenAid Europa, Inc. BUIV, Nijverheidslaan 3, bus 5, 1853 Strombeek-Bever, Belgium, VAT BE 0441.626.053 RPR Brussels ('Warrantor') grants the end-user, who is a consumer, a contractual warranty (the 'Warranty') in accordance with the following terms.

The Warranty applies in addition to the statutory warranty rights of the end customer against the seller of the product and does not limit these rights. In fact, as a consumer, you legally benefit from a 2-year warranty of legal conformity towards the seller as set out in national legislation concerning the sale of consumer goods (Articles 1649 bis to 1649 octies of the Belgian Civil Code), in addition to the statutory warranty for hidden defects (Articles 1641 to 1649 of the Belgian Civil Code).

Netherlands:

KitchenAid Europa, Inc., Nijverheidslaan 3, bus 5, 1853 Strombeek-Bever, Belgium ('Warrantor') grants the end-user, who is a consumer, a warranty in accordance with the following terms.

The Warranty applies in addition to the statutory warranty rights of the end customer against the seller of the product and does not limit these rights.

1. Scope and Terms of the Warranty

a) The Warrantor grants the Warranty for the products mentioned in Section 1.b) purchased by a customer from a retailer or a KitchenAid-Group company in the countries of the European Economic Area, Moldova, Montenegro, Russia, Switzerland, or Turkey.

b) The Warranty period depends on the purchased product and is as follows:

• Two years full warranty from the date of purchase.

c) The Warranty period commences on the date of purchase, i.e., the date on which a customer purchased the product from a dealer or a KitchenAid-Group company.

d) The Warranty covers the product's freedom from defects.

e) The Warrantor will provide the customer with the following services under this Warranty, at the Warrantor's choice, if a defect occurs during the Warranty period:

• Repair of the defective product or product part, or
• Replacement of the defective product or product part. If a product is no longer available, the Warrantor has the right to exchange the product for a product of equal or higher value.

f) To claim the Warranty, the customer must contact the country-specific KitchenAid service centers or the Warrantor directly at KitchenAid Europa, Inc., Nijverheidslaan 3, bus 5, 1853 Strombeek-Bever, Belgium:

• Email: CONSUMERCARE.BE@Kitchenaid.eu
• Netherlands Email: CONSUMERCARE.NL@kitchenaid.eu
• Telephone Belgium and Netherlands: 00 800 381 040 26

g) Repair costs, including spare parts, and shipping costs for delivering a non-defective product or product part will be borne by the Warrantor. The Warrantor will also reimburse the shipping costs for returning the defective product or product part if the Warrantor or the country-specific KitchenAid service center has requested the return of the defective product or product part. However, the consumer is responsible for the costs of proper packaging for returning the defective product or product part.

h) To claim the Warranty, the customer must present the receipt or invoice for the product purchase.

2. Limitations of the Warranty

a) The Warranty applies only to products used for private purposes and not to products used for professional or commercial purposes.

b) The Warranty does not apply in cases of normal wear and tear, incorrect use or misuse, failure to follow the operating instructions, using the product with the wrong electrical voltage, installation and operation contrary to applicable electrical regulations, and the use of force or violence (e.g., hitting).

c) The Warranty does not apply if the product has been modified or converted, for example, if it has been converted from a 120V product to a 220-240V product.

d) Providing Warranty service does not extend the Warranty period, nor does it commence a new Warranty period. The Warranty period for installed spare parts ends with the Warranty period for the entire product.

After the Warranty period expires or for products not covered by the warranty, KitchenAid customer service centers remain available to the end-user for questions and information. More information can also be found on our website: www.kitchenaid.eu.

Product Registration

Register your new KitchenAid appliance at: http://www.kitchenaid.eu/register

©2022 All rights reserved. KITCHENAID and the design of the stand mixer are trademarks in the U.S. and elsewhere.