Fiamma Privacy Room

Introduction

This document provides installation and usage instructions for the Fiamma Privacy Room, compatible with awning models F80s, F65s, and F65L.

The following languages are supported for this product:

• English (EN)
• German (DE)
• French (FR)
• Spanish (ES)
• Italian (IT)
• Dutch (NL)
• Swedish (SV)
• Danish (DA)
• Norwegian (NO)
• Finnish (FI)
• Portuguese (PT)

Components and Parts

The Privacy Room system includes a Base Module and various panels. Specific configurations may require additional kits.

Base Module

The Base Module is available in sizes [S], [M], and [L].

Front Panels

Various front panels are available, including:

• Panel E (Only for Privacy Room 400 Ducato Kreos)
• Panels L and L2 (for specific configurations)

Installation Parts

Key components for installation include:

• Part R (44x) - Stakes
• Part S (22x) - Chain/Guy ropes
• Part T (22x) - Tensioners
• Part V (20x) - Hooks
• Part K (4x) - Poles/Support rods
• Part U (2x) - Curtain/Panel attachments
• Part G (4x) - Fast Clips
• Kit 98661-018 (for F80s)
• Kit 98655-899 (for F65)

Model Overview and Specifications

The Privacy Room is available in various sizes and configurations, designed to fit different vehicle models and awning lengths.

Pre-Installation Checks

Before proceeding with installation, check that all parts are present and undamaged. In case of doubts or questions regarding installation, use, or limitations of the product, contact your local dealer.

Installation Steps

Follow these steps for a correct installation:

1. Step 2: Attach the Fast Clip [G] to the awning rail.
2. Step 3: Insert the poles into the fabric sleeves of the Privacy Room panels.
3. Step 4: Connect the front panels (e.g., D1 and D2) using the Fast Clips [G] to the awning rail.
4. Step 5: Raise the structure by unfolding the panels.
5. Step 6: Secure the structure to the ground using stakes [R], tensioners [T], and guy ropes [S].
6. Step 7: Attach the canopy using the provided clips and poles.
7. Step 8: Install specific front panels like E, L, or L2 as per the model and vehicle requirements.
8. Step 9: Different front panel options are shown for various Privacy Room models (e.g., P.R. 320, P.R. 340, etc.), indicating the specific panels (F, H, N, P, Q, U) used.
9. Step 10: Insert the support pole [K] into the designated sleeve.
10. Step 11: Secure the bottom edges of the Privacy Room to the ground, often using stakes and the velcro fastening.
11. Step 12: Before staking the structure, close the windows by fastening them to the velcro at the bottom.
12. Step 13: Assemble the securing components: stake [R], hook [V], chain [S], and clip [T] are used together to anchor the structure firmly.

Securing Options

Two primary options are provided for securing the Privacy Room to the ground:

• Option 1: Illustrates a method of anchoring the structure, showing 'IN' and 'OUT' positions for securing points.
• Option 2: Presents an alternative anchoring method, also indicating 'IN' and 'OUT' positions for the securing points.

Rain Management

In case of rain, it is recommended to lower one of the support poles to allow water to flow off the structure.

Support and Spare Parts

In case of problems, please contact your local dealer. Provide the data from the product's nameplate (item and serial number). For spare parts drawings and information, consult the Fiamma website: fiamma.com.

Product Quality and Materials

Fiamma declines all responsibility for personal injury or property damage resulting from incorrect assembly or use. All Fiamma Privacy closures are manufactured to a high quality standard. Fabrics are tested for tear resistance, water pressure, color fastness, and resistance to atmospheric agents. Fabrics are waxed or laminated multiple times to ensure waterproofing. Minor irregularities like small bright spots or weaving variations (knots, thickenings) are technically unavoidable and do not compromise the product's quality or waterproofing.

Maintenance Instructions

Condensation: Condensation can form due to temperature differences. Use an airtight floor and ensure good ventilation to reduce it. Store the Privacy Room only when dry and clean. If stored damp, reopen within 12 hours to dry.

Cleaning: Most dirt is superficial and can be removed with water and a cloth or brush. For stubborn dirt, use mild detergent (like Marseille soap) and rinse thoroughly. Never use aggressive chemicals or high-pressure cleaners.

PVC Windows: Clean with water and a soft cloth only. Do not use detergents containing alcohol or solvents.

Zippers: Subject to wear. Open and close gently. Lubricate zippers with a normal zipper spray to ensure smooth operation.

Curtains: Wash at 30°C with mild detergent. Tension accessories, hooks, eyelets, and wind tabs are subject to wear.

Available Accessories

The following accessories are available for the Privacy Room:

• Front Panel 20 (Item No. 08364-01)
• Front Panel 40 (Item No. 08364A01)
• Front Panel 70 (Item No. 08364C01)
• Front Panel 100 (Item No. 08364E01)
• Front Panel 125 (Item No. 08364F01)
• Front Panel 150 (Item No. 08364H01)
• Tie Down S (Item No. 98655-567, 98655-133)
• Door Pole (only for F65) (Item No. 05161-08)
• Curtains Kit Smoke (Item No. 98655A483, 98655A484)
• Moskito Net Door (Item No. 07365-01)
• Privacy Kit Rail (Item No. 07364-01)
• Pack Organizer (Item No. 07512A01, 07512-01, 07513-01)
• Pack Organizer Privacy (Item No. 07366-01)
• Kit Magic Privacy Front for awning from 260 to 360 and 450 (Item No. 06856-01)
• Kit Magic Privacy Side (Item No. 06856-04)
• Skirting Ducato (Item No. 06469-01)
• Skirting Caravan (Item No. 98655-084)
• Skirting Motorhome (Item No. 98655-090)

Warranty Information

In case of defects regarding materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country where the product was purchased. Consumers can assert their warranty rights against the seller under the conditions provided by local legal provisions.

Company Information

Fiamma S.p.A. - Italy

Via San Rocco, 56

21010 Cardano al Campo (VA)

Website: fiamma.com

All rights reserved. Fiamma S.p.A. reserves the right to modify at any time, without notice, prices, materials, specifications and models or to cease production of any model.