Declaration of Conformity
Hereby, [Thousandshores Deutschland GmbH] declares that the radio equipment type [True Wireless Earbuds BTH96] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://files.tribit.com/bth96-eu-doc.pdf
Hiermit erklärt [Thousandshores Deutschland GmbH], dass der Funkanlagentyp [True Wireless Earbuds BTH96] der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: http://files.tribit.com/bth96-de-doc.pdf
Learn more about the UK Declaration of Conformity. Please click below link to download: http://files.tribit.com/bth96-uk-doc.pdf
Tribit FlyBuds C2 True Wireless Earbuds
Model: BTH96
Package Contents
- ① Earbuds (L/R)
- ② Charging Case
- ③ USB-C Charging Cable
- 4 User Manual
Product Parts
Earbud: Features Microphone 1, Earbuds' Indicator Lights, Earbuds' Touch Area, and Charging Contacts at the bottom.
Charging Case: Contains slots for the earbuds, Charging Case's Indicator Lights, and a USB-C Charging Port.
How to Wear the Earbuds
To Wear: Place the earbud in your ear canal and rotate it until comfortable.
To Call: Aim the microphone at the mouth for a better call effect.
To Pick & Place: Place the left earbud into its designated slot in the open charging case, and the right earbud into its slot.
Power ON / Power OFF
First-time use: Please tear off the insulation sticker.
To power On: Open the charging case.
To power Off: Close the charging case.
Bluetooth Connection Instructions
Connect the earbuds to a Bluetooth device: Open the charging case. The earbuds will automatically enter Bluetooth pairing mode, indicated by flashing red and white indicator lights. Turn on the Bluetooth function on your device, refresh the list, and select "Tribit FlyBuds C2" to connect. The indicator lights will go off upon successful connection.
Connect the earbuds with other devices:
- Method 1: Disconnect the earbuds from the current Bluetooth device. They will automatically enter Bluetooth pairing mode.
- Method 2: Tap either earbud four times. When the white indicator light turns on, touch and hold the earbud for 3 seconds. The indicator lights of both earbuds will flash red, indicating they have entered Bluetooth pairing mode.
Touch Control Instructions
| Action | Control |
|---|---|
| Play / Pause | Tap either earbud twice |
| Next Track | Triple tap the right earbud |
| Volume + | Touch and hold the right earbud (during a call or music playing) |
| Volume - | Touch and hold the left earbud (during a call or music playing) |
| Voice Assistant | Triple tap the left earbud |
| Answer a Call | Tap either earbud once |
| End a Call | Tap either earbud twice |
| Rejecting an Incoming Call | Touch and hold either earbud |
| Power Off | Touch and hold either earbud for 10s (without a call or music playing). The red light will flash for 1s with the power-off prompt tone: Power OFF. |
| Power On | Touch and hold the left and right earphones for 6s. The white light will flash for 6s with the power-on prompt tone: Power ON. |
Charging Instructions
When the earbuds' indicator lights flash red slowly, please charge them.
To charge the earbuds: Put the earbuds into the charging case and close the case. The indicator lights on the far left and right of the charging box show the charging status of each earbud. During charging, the indicator lights will be always on and will go off after the earbuds are fully charged. Charging time for the earbuds is about 90 minutes.
Open the top cover of the charging case to display its battery level. When the battery runs out, the indicator light of the charging case will be off. Please charge the case.
To charge the charging case: Plug one end of the USB cable into a 5V power supply and the other end into the charging port of the charging case. The indicator lights will flash during charging and stay on when the case is fully charged. Charging time for the charging case is about 90 minutes.
*The above data comes from Thousandshores Laboratory. Thousandshores reserves all rights for final explanation.
How to Reset the Earbuds
Step 1: Turn off the left and right earbuds. Touch and hold the touch area for 10 seconds (at the 6th second, the earbuds will turn on with the white indicator light flashing once and then go out).
Step 2: Double touch the left and right earbuds to enter the reset state within 5 seconds.
Step 3: After the earbuds are reset successfully, the white lights of the left and right earbuds will flash quickly.
Note: After resetting, if a Bluetooth device has been connected, you need to delete the pairing record to allow the earbuds to be paired again.
Frequency Band & Maximum Transmission Power
Frequency band: 2402~2480MHz
Maximum transmission power: -6~+4dBm
Warning
- Do not dismantle or modify the earbuds for any reason, otherwise any malfunction of the earbuds is not covered by the warranty.
- Do not deliberately contact the earbuds to liquids, which may damage the earbuds and invalidate the warranty.
- Do not place the earbuds in environments where the temperature is too high or too low (above 45 °C or below -20 °C).
- This product includes a built-in lithium battery. It is forbidden to disassemble, bump, squeeze, or throw the product into fire.
- Please keep the earbuds away from children to avoid accidental swallowing and other injuries.
Important Notes
- In a noisy environment, the voice from the earbuds will sound lower than the actual volume.
- Listening to music with high volume for a long time may cause permanent damage to your hearing.
- Please use the charging cable and power adapter or computer to charge the earbuds. When charging, only use an adapter that complies with national/regional regulations and international and regional safety standards.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Qualcomm aptX Information
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
