HOW TO INSTALL TROLMASTER CONTROLLER WITH VERTX 600 SERIES FOR COMMERCIAL GROW SPACE

Step 1: Choose Right Controller & Accessories

• 1. Trolmaster Hydro-X Environment Control System (HCS-1)

  Required QTY – 1

  Image shows the Trolmaster Hydro-X Environment Control System (HCS-1) with a digital display showing environmental parameters like PPFD, temperature, humidity, and CO2 levels. It controls a total of 512 lights (256 lights per Channel).

• 2. Lighting Control Adapter F (LMA-14)

  Required QTY – 1 (if using 1 per channel – 256 lights)

  Required QTY – 2 (If using 2 channels – 512 lights)

  Image shows the Trolmaster Lighting Control Adapter F (LMA-14), a black box with input/output ports, labeled 'Lighting Adaptor F (0-10V)'.

• 3. RJ12 to PushLock Waterproof Connector converter cable (ECS-5)

  Required per Light

  Image shows the Trolmaster RJ12 to PushLock Waterproof Connector converter cable (ECS-5), a blue connector with an RJ12 plug on one end and a push-lock connector on the other. Each Light Requires 1 ECS-5 Connector.

Step 2: Install Trolmaster HCS-1 on wall using instruction

1. Install Trolmaster HCS-1 on wall with power plug.
2. Connect LMA-14 Adapter to Line 1.
3. Connect 3 in 1 sensor to sensor on trolmaster controller.

Image shows the Trolmaster HCS-1 controller mounted on a white wall, connected to a power plug and a cable leading to a sensor.

Step 3: Connectivity of ECS-5 Cable Set to LMA-14 Connector

Connect the RJ12 to PushLock Waterproof Connector converter cable. The other end of the RJ12 connection goes to the splitter.

Image shows a black splitter box with one RJ12 input and two RJ12 outputs. Red arrows point from the splitter to 'Push Lock Connector to VertX 600' on both output sides and to 'LMA-14 Connector' on the input side.

Step 4: Connectivity of ECS-5 Cable Set

1) Connect Push Connector to Driver Assembly of VertX 600.

Image shows the driver assembly of the VertX 600, a black box with several connectors. A red arrow points from 'Push Connector to VertX 600 Driver' to one of the connectors on the assembly.

System Diagram

Diagram illustrates the system connectivity. It shows a 3-in-1 sensor connected to the Trolmaster HCS-1 controller. The controller is also connected to the internet via a network cable. The HCS-1 connects to a Lighting Adapter (LMA-14), which then connects to lights via push-lock connectors. The diagram labels include 'Internet', 'Sensor', 'Lighting Adapter', 'Light', and '2 channel'.