ZVOX AV120 Soundbar Functions
This document outlines the functions and LED light sequences for the ZVOX AV120 soundbar, providing clear indicators for various operational states.
AV120 Remote Overview
The AV120 features a remote control for operation. Key buttons include INPUT, POWER, ACCUVOICE, SURROUND, MUTE, PLAY/PAUSE, VOLUME UP/DOWN, BACK, FWD, and OTHER SETTINGS.
Back & Forward Buttons
The ⏪ (BACK) and ⏩ (FWD) buttons are used to skip backward or forward through audio tracks when using USB Drive Input or Bluetooth connections.
LED Light Sequences
The LED indicator light, located at the center of the soundbar grille above the ZVOX logo, provides visual feedback for different functions:
- Powered On: Flashes WHITE followed by GREEN light. ☀️➡️?
- Powered Off: Single blink of RED light. ?
- AccuVoice 1: Single blink of PURPLE light. ?
- AccuVoice 2: Double blink of PURPLE light. ??
- Surround 1: Single blink of BLUE light. ?
- Surround 2: Double blink of BLUE light. ??
- Bluetooth Input:
- Searching for device or pairing: Blinks BLUE. ?
- Paired: Blinks BLUE solid briefly, then disappears. ? (brief)
- Volume Down: Display blinks YELLOW. ?
- Volume Up: Display blinks BLUE. ?
- USB Input:
- Selected: Display shows solid RED light briefly, then disappears. ? (brief)
- Volume Down: Display blinks YELLOW. ?
- Volume Up: Display blinks RED. ?
- Optical/Minijack Input:
- Selected: Display shows solid GREEN light briefly, then disappears. ? (brief)
- Volume Down: Display blinks YELLOW. ?
- Volume Up: Display blinks GREEN. ?
- MUTE: Display blinks YELLOW slowly. ? (slow blink)
- Auto On/Off: This function is adjusted using the OTHER SETTINGS button on the remote. The unit has Auto On/Off active out of the box.
- To disable Auto ON/OFF: Press and hold the OTHER SETTINGS button until the RED light flashes 3 times. ???
- To re-enable Auto ON/OFF: Do the same until the display flashes BLUE 3 times. ???
