sanag M15 Portable Bluetooth Speaker

Packing List

Visual representation of the package contents, showing the following items:

• Speaker (sanag M15)
• Instruction Manual
• Type-C Charging Cable
• Warranty Card

Product Overview

The sanag M15 speaker features a compact design with accessible controls:

• Type-C Charging Port: For charging the device.
• Mode Switch Key: Used to change operating modes.
• Volume + Key: Increases volume or navigates forward.
• Volume - Key: Decreases volume or navigates backward.
• On/off/Play/Pause Composite Key: A multi-function button for power, playback control, and call management.

Key Function Operation

• Power On/Off: Press and hold the composite key for 1 second to turn on, or 3 seconds to turn off.
• Play/Pause/Answer/Hang Up: Single-click the composite key.
• FM Mode Channel Search: Single-click the composite key in FM mode.
• Voice Assistant: Double-click the composite key (without an app open) to activate your phone's voice assistant.
• Previous Track / Volume Down: Long press the Volume - key for the previous track; short press to decrease volume.
• Next Track / Volume Up: Long press the Volume + key for the next track; short press to increase volume.
• Reject Call: Long press the composite key for 2 seconds.
• Switch Mode (Bluetooth/FM): Press and hold the composite key for 3 seconds.
• Light Mode Switch: Double-click the composite key to switch or turn light effects on/off.
• Reset: While powered on, press and hold the composite key for 8 seconds.
• Clear Pairing: While powered on, press and hold both Volume + and Volume - keys for 8 seconds.

Bluetooth Operation

Connection Successful:

1. Ensure the speaker is in Bluetooth mode.
2. On your mobile phone, search for the Bluetooth pairing name "sanag M15" and select it to connect.
3. The speaker will automatically reconnect to the last paired device by default.

Bluetooth Disconnected:

1. If the Bluetooth on your mobile phone is manually turned off, the speaker will enter pairing mode.
2. If the speaker disconnects due to being out of range, it will attempt to reconnect when back within range (approx. 10m).
3. If the connection is not re-established within 5 minutes of returning to range, the speaker will automatically shut down.

Specifications

Matters Needing Attention

• Do not use abrasive cleaners to clean this product.
• Do not allow this product to be heated or placed near a fire source, such as a cooking stove.
• Do not expose the product to direct sunlight for extended periods.
• Do not discard this product in fire, as it may cause an explosion.
• Do not attempt to disassemble or modify this product, as it contains no user-serviceable parts.
• Do not use this product in the rain.
• If the product will not be used for an extended period, store it in a dry environment. Charge the speaker at least once a month to maintain battery health and prevent damage from extreme temperatures and dust.

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.